1. Research on the Electrochemical Behavior of Si(IV) on the Tungsten Electrode in CaCl2–CaF2–CaO Molten Melt

    Jidong Li, L., Ren, H., Guo, F., Lu, J., Li, J. & Yang, Y., Sep 2018, In : Russian Journal of Non-Ferrous Metals. 59, 5, p. 486-492 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  2. Residence time distribution analysis (RTD) of a hazardous waste rotary iln incinerator by way of CFD simulation

    Yang, Y., Hartman, DTM. & Reuter, MA., 2000, Proc. International Conference on Applied Computational Fluid Dynamics (ACFD 2000), Beijing, China. Wu, JH. (ed.). p. 492-499 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  3. Resource recovery from MSW incinerator bottom ash.

    Yang, Y. & Xiao, Y., 2011, Proceedings of the Conference "Sustainability through Resource Conservation and Recyling".. s.n. (ed.). Falmouth, United Kingdom: Minerals Engineering International, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Rotary kiln control in chemical waste incinerators: combustion modelling and RTD analysis - Progress report 3

    Yang, Y. & Reuter, MA., 2000, Delft, The Netherlands: Delft University of Technology. 20 p.

    Research output: Book/ReportReportProfessional

  5. Rotary kiln control on chemical waste incinerators - Final report

    Voncken, JHL. & Yang, Y., 2001, Delft, The Netherlands: Delft University of Technology. 34 p.

    Research output: Book/ReportReportProfessional

  6. Rotery kiln control on chemical waste incinerators - Final Report

    Voncken, JHL. & Yang, Y., 2001, Delft: Delft University of Technology. 34 p.

    Research output: Book/ReportReportProfessional

  7. Section 40.4 Metallurgical process control

    Reuter, MA. & Yang, Y., 2003, Smithels Metals Reference Book, 8th Edition. Gale, WF. (ed.). p. 1-17

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  8. Section 40.4 Metallurgical process control - Invited book chapter

    Reuter, MA. & Yang, Y., 2004, Smithells etals reference book, 8th edition. Gale, WF. & Totemeier, TC. (eds.). Butterworth Heinemann, p. 16-29

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  9. Selective copper recovery from complex mixtures of end-of-life electronic products with ammonia-based solution

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H., Visser, G. & Yang, Y., 2015, In : Hydrometallurgy. 152, p. 91-99 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Selective electrochemical extraction of REEs from NdFeB magnet waste at room temperature

    Venkatesan, P., Vander Hoogerstraete, T., Hennebel, T., Binnemans, K., Sietsma, J. & Yang, Y., 2018, In : Green Chemistry. 20, 5, p. 1065-1073

    Research output: Contribution to journalArticleScientificpeer-review

  11. Selective extraction of rare earth elements from NdFeB scrap by molten chlorides

    Hua, Z., Wang, J., Wang, L., Zhao, Z., Li, X., Xiao, Y. & Yang, Y., 2014, In : ACS Sustainable Chemistry and Engineering. 2, 11, p. 2536-2543 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Selective extraction of rare-earth elements from NdFeB magnets by a room-temperature electrolysis pretreatment step

    Venkatesan, P., Vander Hoogerstraete, T., Binnemans, K., Sun, Z., Sietsma, J. & Yang, Y., 2018, In : ACS Sustainable Chemistry and Engineering. 6, 7, p. 9375-9382

    Research output: Contribution to journalArticleScientificpeer-review

  13. Semiempirical model for the solubility of rare earth oxides in molten fluorides

    Guo, X., Sun, Z., Sietsma, J. & Yang, Y., 2016, In : Industrial and Engineering Chemistry Research. 55, 16, p. 4773-4781

    Research output: Contribution to journalArticleScientificpeer-review

  14. Separation of zirconium and hafnium: a review.

    Xu, L., Xiao, Y., van Sandwijk, A., Xu, Q. & Yang, Y., 2014, Energy Materials 2014. s.n. (ed.). Hoboken, New Jersey: John Wiley & Sons, p. 451-457 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Simulation of combustion and metal heating in a mobile heat treatment furnace, multiphase phenomena and CFD modelling and simulation of engineering processes

    Yang, Y., de Jong, RA. & Reuter, MA., 2004, Proc. TMS annual meeting, Charlotte, North Carolina, USA. Nastac, L. & Li, BQ. (eds.). Warrendale, USA: TMS, p. 429-439 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  16. Simulation of gas flow and heat transfer in a rotary kiln hazardous waste incinerator.

    Rakhorst, J., Yang, Y., Reuter, MA. & Voncken, JHL., 1999, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 12, 3, p. 278-292 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Simulation of gas flow and heat transfer inside a commercial hazardous waste rotary kiln incinerator

    Hartman, DTM., Yang, Y. & Reuter, MA., 2000, Proc. AFCD 2000, Int. Conference on Applied Computational Fluid Dynamics, Beijing, China. Wu, JH. (ed.). p. 476-483 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  18. Simulation of gas flow and heat transfer inside a commercial hazardous waste rotary kiln incinerator.

    Hartman, DTM., Yang, Y. & Reuter, MA., 2000, Proceedings of International Conference on Applied Computational Fluid Dynamics (ACFD 2000). Wu, J-H. (ed.). Beijing, China: s.n., p. 476-483 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Simulation of slab movement and transient heating in a continuous steel reheat furnace

    Yang, Y., Kroeze, J. & Reuter, MA., 2004, In : Progress in Computational Fluid Dynamics: an international journal. 4, 1, p. 46-58 13 p.

    Research output: Contribution to journalArticleScientific

  20. Simultaneous electrochemical recovery of rare earth elements and iron from magnet scrap: A theoretical analysis

    Venkatesan, P., Sun, Z., Sietsma, J. & Yang, Y., 2015, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Filho, WL. (eds.). Amsterdam, The Netherlands: Elsevier, p. 335-346

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  21. Slag optimisation considering iron loss and sulphide capacity in hot metal desulphurisation

    Schrama, F. N. H., Moosavi-Khoonsari, E., Beunder, E. M., Kooij, C., Boom, R., Sietsma, J. & Yang, Y., 2018, ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0. Associazione Italiana di Metallurgia

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Slag treatment followed by acid leaching as a route to solar-grade silicon

    Meteleva-Fischer, YV., Yang, Y., Boom, R., Kraaijveld, B. & Kuntzel, H., 2012, In : JOM. 64, 8, p. 957-967 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Solubility of ZrO2 in molten salt system.

    Xiao, Y., Laging, VJW., van Sandwijk, A. & Yang, Y., 2012, Metals and Materials Processing in a Clean Environment, Volume 3: Molten Salts & Ionic Liquids 2011. Kongoli, F. (ed.). Wilmington, USA: Flogen Technologies, p. 135-140 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Solubility of rare earth oxides in molten fluorides

    Guo, X., Sietsma, J. & Yang, Y., 2014, Proceedings of the 1st European Rare Earth Resources Conference. Balomenos, E., Panias, D. & Paspaliaris, I. (eds.). Santorin: Heliotopos Conferences Ltd., p. 149-155 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Strategic evaluations on electronic wastes for metal recycling.

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H., de Visser, G. & Yang, Y., 2014.

    Research output: Contribution to conferencePosterProfessional

  26. Study of adsorption property of Ga(III) onto strongly basic resin for Ga extraction from Bayer liquor.

    Yang, Y., Zhao, Z., Luo, H., Hua, Z. & Ma, X., 2013, Proceedings of REWAS 2013: Enabling Materials Resource Sustainability.. Kvithyld, A., Meskers, C., Kirchain, R. & Krumdick, G. (eds.). Hoboken, NJ, USA: John Wiley & Sons, p. 27-35 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  27. Study of melting behaviour of aluminium scraps in molten melts

    Zhou, B., Yang, Y. & Reuter, MA., 2002, Proc. TMS Fall 2002 extraction and processing division meeting on recycling and waste treatment in mineral and metal processing: technical and econmic aspects, Lulea, Sweden. p. 527-537 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  28. Study of melting behaviours of aluminium scraps in molten aluminium and salt melts

    Zhou, B., Yang, Y. & Reuter, MA., 2002, Delft, The Netherlands: Delft University of Technology. 31 p.

    Research output: Book/ReportReportProfessional

  29. Study of transient cooling of a tundish after preheating during continuous casting of steel

    Mahabir, J. & Yang, Y., 2000, Delft: CITG Section Processing of Primary Raw Materials. 22 p.

    Research output: Book/ReportReportProfessional

  30. Subject-specific channel selection using time information for motor imagery brain-computer interfaces

    Yang, Y., Bloch, I., Chevallier, S. & Wiart, J., 2016, In : Cognitive Computation. 8, 3, p. 505 - 518

    Research output: Contribution to journalArticleScientificpeer-review

  31. Sulphur removal in ironmaking and oxygen steelmaking

    Schrama, F. N. H., Beunder, E. M., van den Berg, B., Yang, Y. & Boom, R., 2017, In : Ironmaking & Steelmaking: processes, products and applications. 44, 5, p. 333-343

    Research output: Contribution to journalArticleScientificpeer-review

  32. Teaching metallurgy and recycling in an international MSc program in the context of metal and material ecology

    Reuter, MA., Heiskanen, K., Boin, UMJ., van Schaik, A. & Yang, Y., 2005, Proceedings of EMC 2005. S.n. (ed.). Clausthal-Zellerfeld: GDMB Informationsgesellschaft, p. 351-367 17 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Terahertz heterodyne receiver based on a quantum cascade laser and a superconducting bolometer

    Gao, JR., Hovenier, JN., Yang, Y., Baselmans, JJA., Baryshev, AM., Hajenius, M., Klapwijk, TM., Adam, AJL., Klaassen, TO., Williams, BS., Kumar, S., Hu, Q. & Reno, JL., 2005, In : Applied Physics Letters. 86, 24, p. 244104-1-244104-3

    Research output: Contribution to journalArticleScientificpeer-review

  34. The development of a CFD model of a submerged arc furnace for phosphorus production.

    Scheepers, E., Yang, Y., Reuter, MA. & Adema, AT., 2006, In : Minerals Engineering. 19, 10, p. 1115-1125 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. The distributed nature of material properties and its effect on liquid flow and mass transfer in the blast furnace lower zone

    Post, JR., Husslage, WM., Yang, Y. & Reuter, MA., 2002, Proc. International blast furnace lower zone symposium, Wollongong, Australia. p. 6-1-6-13

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  36. The hampering effect of precipitated carbon on hot metal desulfurization with magnesium

    Schrama, F. N. H., Beunder, E. M., Visser, H. J., Sietsma, J., Boom, R. & Yang, Y., 2019, In : Steel Research International. 8 p., 1900441.

    Research output: Contribution to journalArticleScientificpeer-review

  37. The metrics of material and metal ecology

    Reuter, MA., Heiskanen, K., Boin, UMJ., van Schaik, A., Verhoef, EV., Yang, Y. & Georgalli, GA., 2005, Elsevier. 720 p.

    Research output: Book/ReportBookScientific

  38. The metrics of material and metal ecology - Harmonizing the resource, technology and environmental cycles

    Reuter, MA., Heiskanen, K., Boin, UMJ., van Schaik, A., Verhoef, E., Yang, Y. & Georgalli, GA., 2005, Amsterdam: Elsevier. 706 p.

    Research output: Book/ReportBookScientificpeer-review

  39. The optimization of recycling: integrating the resource, technological and life cycles

    Reuter, MA., Boin, UMF., Rem, PC., Yang, Y., Fraunholcz, N. & van Schaik, A., 2004, In : JOM: Journal of Metals. 56, 8, p. 33-37 5 p.

    Research output: Contribution to journalArticleScientific

  40. The use of computational fluid dynamics for control of a chemcial waste rotary kiln incinerator.

    Yang, Y. & Reuter, MA., 2001, Proceedings of the 38th GDMB Symposium on automation in Metallurgy. sn (ed.). Grevenbroich, Germany: s.n., p. 73-85 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. The use of computational fluid dynamics for control of a chemical waste rotary kiln incinerator.

    Yang, Y. & Reuter, MA., 2001, In : Gesellschaft Deutscher Metallhuetten- und Bergleute. Schriftenreihe. 89, p. 73-85 13 p.

    Research output: Contribution to journalArticleScientific

  42. Thermal behaviour of ESP ash from municipal solid waste incinerators

    Yang, Y., Xiao, Y., Wilson, N. & Voncken, JHL., 2009, In : Journal of Hazardous Materials. 166, 1, p. 567-575 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  43. Thermal behaviour of boiler ash from municipal sold waste incinerator.

    Xiao, Y., Wilson, N., Yang, Y. & Voncken, JHL., 2006, In : Acta Metallurgica Slovaca. 12, p. 436-446 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  44. Thermal decomposition behaviour of fine iron ore particles

    Qu, Y., Yang, Y., Zou, Z., Zeilstra, C., Meijer, K. & Boom, R., 2014, In : ISIJ International. 54, 10, p. 2196-2205 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Thermal decomposition of fine iron ore in a drop tube furnace.

    Qu, Y., Yang, Y., Zeilstra, C., Meijer, K. & Boom, R., 2012, Proceedings of SCANMET IV. s.n. (ed.). Luleå, Sweden: Swerea MEFOS, p. 541-551 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Thermal decomposition reaction kinetics of hematite ore

    Chen, Z., Zeilstra, C., van der Stel, J., Sietsma, J. & Yang, Y., 2020, In : ISIJ International. 60, 1, p. 65-72

    Research output: Contribution to journalArticleScientificpeer-review

  47. Thermal degradation behaviour of resins in aluminium composite under isothermal condition

    Zhu, G., Wang, W., Wang, R., Xiao, Y., Yang, Y., Dong, A., Wang, D., Shu, D., Wang, J., Sun, B. & Boom, R., 2017, In : Polymer Testing. 61, p. 448-454

    Research output: Contribution to journalArticleScientificpeer-review

  48. Thermal effect of the ventilation air to the cooling ring of the rotary kiln waste incinerator

    Pijnenborg, MJA., Yang, Y. & Reuter, MA., 2003, Delft, The Netherlands: Delft Univ. of Technology, Dept. of Applied Earth Sciences. 19 p.

    Research output: Book/ReportReportProfessional

  49. Thermal processing of industrial ashes for ferrovanadium production.

    Xiao, Y., Yang, Y., Lai, A. & Boom, R., 2013, Proceedings of REWAS 2013: Enabling Materials Resource Sustainability.. Kvithyld, A., Meskers, C., Kirchain, R. & Krumdick, G. (eds.). Hoboken, NJ, USA: John Wiley & Sons, p. 44-53 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Thermal processing of petroleum fly ash for vanadium recovery.

    Xiao, Y., Jalkanen, HK., Yang, Y., Mambote, MCR. & Boom, R., 2010, Proceedings of the XXV International Mineral Processing Congress (IMPC 2010). s.n. (ed.). Brisbane, Australia: The Australasian Institute of Mining and Metallurgy, p. 1643-1652 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

ID: 108812