1. Article › Scientific › Peer-reviewed
  2. Sulphur removal in ironmaking and oxygen steelmaking

    Schrama, F. N. H., Beunder, E. M., van den Berg, B., Yang, Y. & Boom, R., 2017, In : Ironmaking & Steelmaking: processes, products and applications. 44, 5, p. 333-343

    Research output: Contribution to journalArticleScientificpeer-review

  3. Terahertz heterodyne receiver based on a quantum cascade laser and a superconducting bolometer

    Gao, JR., Hovenier, JN., Yang, Y., Baselmans, JJA., Baryshev, AM., Hajenius, M., Klapwijk, TM., Adam, AJL., Klaassen, TO., Williams, BS., Kumar, S., Hu, Q. & Reno, JL., 2005, In : Applied Physics Letters. 86, 24, p. 244104-1-244104-3

    Research output: Contribution to journalArticleScientificpeer-review

  4. The development of a CFD model of a submerged arc furnace for phosphorus production.

    Scheepers, E., Yang, Y., Reuter, MA. & Adema, AT., 2006, In : Minerals Engineering. 19, 10, p. 1115-1125 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. The hampering effect of precipitated carbon on hot metal desulfurization with magnesium

    Schrama, F. N. H., Beunder, E. M., Visser, H. J., Sietsma, J., Boom, R. & Yang, Y., 2019, In : Steel Research International. 8 p., 1900441.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Thermal behaviour of ESP ash from municipal solid waste incinerators

    Yang, Y., Xiao, Y., Wilson, N. & Voncken, JHL., 2009, In : Journal of Hazardous Materials. 166, 1, p. 567-575 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Thermal behaviour of boiler ash from municipal sold waste incinerator.

    Xiao, Y., Wilson, N., Yang, Y. & Voncken, JHL., 2006, In : Acta Metallurgica Slovaca. 12, p. 436-446 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Thermal decomposition behaviour of fine iron ore particles

    Qu, Y., Yang, Y., Zou, Z., Zeilstra, C., Meijer, K. & Boom, R., 2014, In : ISIJ International. 54, 10, p. 2196-2205 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Thermal decomposition reaction kinetics of hematite ore

    Chen, Z., Zeilstra, C., van der Stel, J., Sietsma, J. & Yang, Y., 2020, In : ISIJ International. 60, 1, p. 65-72

    Research output: Contribution to journalArticleScientificpeer-review

  10. Thermal degradation behaviour of resins in aluminium composite under isothermal condition

    Zhu, G., Wang, W., Wang, R., Xiao, Y., Yang, Y., Dong, A., Wang, D., Shu, D., Wang, J., Sun, B. & Boom, R., 2017, In : Polymer Testing. 61, p. 448-454

    Research output: Contribution to journalArticleScientificpeer-review

  11. Thermal treatment and vitrification of boiler ash from a municipal solid waste incinerator

    Yang, Y., Xiao, Y., Voncken, JHL. & Wilson, N., 2008, In : Journal of Hazardous Materials. 154, p. 871-879 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Thermodynamic evaluation for reduction of iron oxide ore particles in a high temperature drop tube furnace

    Chen, Z., Qu, Y., Zeilstra, C., van der Stel, J., Sietsma, J. & Yang, Y., 2018, In : Ironmaking and Steelmaking. 47 (2020), 2, p. 173-177

    Research output: Contribution to journalArticleScientificpeer-review

  13. Thermodynamics of slag formation in multi-component oxide systems in thermal processing of incineration bottom ash - Equilibrium phase relation in CaO-SiO2-FeOx-MgO system.

    Wang, N., Zou, Z., Zhang, Z., Xiao, Y. & Yang, Y., 2011, In : Advanced Materials Research. 194-196, p. 2175-2178 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Toward sustainability for recovery of critical metals from electronic waste: The hydrochemistry processes

    Sun, Z., Cao, C., Xiao, Y., Sietsma, J., Jin, W., Agterhuis, H. & Yang, Y., 2016, In : ACS Sustainable Chemistry and Engineering. 5, 1, p. 21-40

    Research output: Contribution to journalArticleScientificpeer-review

  15. Use of iron reactive anode in electrowinning of neodymium from neodymium oxide

    Abbasalizadeh, A., Seetharaman, S., Venkatesan, P., Sietsma, J. & Yang, Y., 2019, In : Electrochimica Acta. 310, p. 146-152

    Research output: Contribution to journalArticleScientificpeer-review

  16. Vitrification of bottom ash from a municipal solid waste incinerator

    Xiao, Y., Oorsprong, M., Yang, Y. & Voncken, JHL., 2008, In : Waste Management. 28, p. 1016-1027 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Zirconium and hafnium separation with molten salt extraction in Sn–Cu–Zr–Hf and Cu–Zr–Hf alloy systems

    Xu, L., Xiao, Y., van Sandwijk, A., Zhao, Z., Li, J., Xu, Q. & Yang, Y., 2016, In : Separation Science and Technology (Philadelphia). 51, 10, p. 1664-1674

    Research output: Contribution to journalArticleScientificpeer-review

  18. Article › Professional
  19. REE recovery from end-of-life permanent magnet scrap: An overview

    Yang, Y., 2014, In : Science Foundation in China. 22, Supplement, p. 113-126 14 p.

    Research output: Contribution to journalArticleProfessional

  20. Chapter › Scientific › Not peer-reviewed
  21. A critical evaluation of solubility of rare earth oxides in molten fluorides

    Guo, X., Sietsma, J. & Yang, Y., 2016, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Leal Filho, W. (eds.). Elsevier, p. 223-234

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  22. Ironmaking

    Yang, Y., Raipala, K. & Holappa, L., 2014, Treatise on process metallurgy. Volume 3: Industrial processes. Seetharaman, S. (ed.). Amsterdam: Elsevier, p. 2-88 1745 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  23. Leaching of rare earth elements: Review of past and present technologies

    Peelman, S., Sun, Z., Sietsma, J. & Yang, Y., 2016, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Leal Filho, W. (eds.). Elsevier, p. 319-334

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  24. New routes for the production of reactor grade zirconium.

    Xiao, Y., Sandwijk, A., Yang, Y. & Laging, V., 2014, Molten Salts Chemistry and Technology. Gaune-Escard, M. & Haarberg, GM. (eds.). Chichester, West Sussex, UK: Wiley, p. 391-401 632 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  25. Primary Production and Recycling of Critical Metals

    Yang, Y., 2019, Critical Materials: Underlying Causes and Sustainable Mitigation Strategies. Offerman, E. (ed.). London, UK: World Scientific, p. 315-342 (World Scientific Series in Current Energy Issues; vol. 5).

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  26. Rare earth extraction from NdFeB magnets and rare earth oxides using aluminum chloride/fluoride molten salts

    Abbasalizadeh, A., Teng, L., Seetharaman, S., Sietsma, J. & Yang, Y., 2016, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Leal Filho, W. (eds.). Elsevier, p. 357-373

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  27. Section 40.4 Metallurgical process control

    Reuter, MA. & Yang, Y., 2003, Smithels Metals Reference Book, 8th Edition. Gale, WF. (ed.). p. 1-17

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  28. Section 40.4 Metallurgical process control - Invited book chapter

    Reuter, MA. & Yang, Y., 2004, Smithells etals reference book, 8th edition. Gale, WF. & Totemeier, TC. (eds.). Butterworth Heinemann, p. 16-29

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  29. Simultaneous electrochemical recovery of rare earth elements and iron from magnet scrap: A theoretical analysis

    Venkatesan, P., Sun, Z., Sietsma, J. & Yang, Y., 2015, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Filho, WL. (eds.). Amsterdam, The Netherlands: Elsevier, p. 335-346

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  30. Urban mining: contribution to the mitigation of resource scarcity.

    Yang, Y. & Meskers, CEM., 2011, Jaarboek van de Mijnbouwkundige Vereeniging te Delft, 73e editie, 2010-2011. s.n. (ed.). Delft, The Netherlands: Mijnbouwkundige Vereeniging Delft, p. 150-160 384 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientific

  31. Chapter › Scientific › Peer-reviewed
  32. Novel reactive anode for electrochemical extraction of rare earth metals from rare earth oxides

    Abbasalizadeh, A., Seetharaman, S., Venkatesan, P., Sietsma, J. & Yang, Y., 2017, Rare Metal Technology 2017: Proceedings. Kim, H., Alam, S., Neelameggham, N. R., Oosterhof, H., Ouchi, T. & Guan, X. (eds.). Cham, Switzerland: Springer, p. 87-92 (The Minerals, Metals & Materials Series).

    Research output: Chapter in Book/Conference proceedings/Edited volumeChapterScientificpeer-review

  33. Conference contribution › Scientific › Not peer-reviewed
  34. A brief review on recovery of cerium from glass polishing waste

    Borra, C., Vlugt, T., Yang, Y. & Offerman, E., 2017, Proceedings of the 5th International Slag Valorisation Symposium. Leuven, Belgium, p. 495-498

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  35. A dynamic CFD hybrid model for submerged arc furnace control

    Scheepers, E., Yang, Y., Reuter, MA., Voncken, JHL. & Adema, AT., 2005, Proc. computational modelling in mineral processing 2005 conference, Cape Town, South Africa. Wills, BA. (ed.). Elsevier, p. 1-12 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  36. A dynamic CFD hybrid model of a submerged arc furnace for phosphorus production

    Adema, AT., Scheepers, E., Yang, Y. & Reuter, MA., 2005, Proc. 2005 fluent Benelux user group meeting, Limelette, Belgium. s.n. (ed.). Wavre, Belgium: Fluent Ltd., p. 3c-1-3c-12

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  37. A dynamic CFD model for submerged arc furnace control

    Scheepers, E., Yang, Y., Reuter, MA., Voncken, JHL. & Adema, AT., 2005, Proc. pyrometallurgy 2005 conference, Cape Town, South Africa. Wills, BA. (ed.). Elsevier, p. 1-11 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  38. Aluminium recycling scrap melting and process simulation

    Yang, Y., Xiao, Y., Zhou, B. & Reuter, MA., 2005, Proc. John Floyd international symposium: sustainable deveopments in metalsprocessing, Melbourne, Australia. Nilmani, M. & Rankin, WJ. (eds.). Australia: NCS associates, p. 251-264 14 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  39. Analysis of transport process in submerged arc furnace for ferrochrome production

    Yang, Y., Xiao, Y. & Reuter, MA., 2004, Proc. international ferroalloy conference, INFACON X, Cape Town, South Africa. Johannesburg, South Africa: South African Institute of Mining and Metallurgy, p. 15-25 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  40. Better understanding and strategic control od hazardous waste incineration at AVR-Chemie

    Yang, Y., Reuter, MA. & Voncken, JHL., 2001, Proc. International Conference on Environmental Concerns and Emerging Abatement Technologies (ECAT). et al Wang, Z. (ed.). Beijing, China, p. 35-1-35-4

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  41. Better understanding and strategic control of hazardous waste incineration at AVR-Chemie

    Yang, Y., Reuter, MA., Voncken, JHL. & Verwoerd, J., 2001, Proc. ECAT International Conferenceon Environmental Concerns and Emerging Abatement Technologies. Beijing, China, p. 35-1-35-4

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  42. CFD based process modelling of a rotary furnace for auminium scrap melting

    Zhou, B., Yang, Y., Reuter, MA. & Boin, UMJ., 2005, Proc. 4th international conference computational fluid dynamicsin the oil and gas, metallurgical & process industries. Page, I. & Johansen, ST. (eds.). Trondheim, Norway: SINTEF, p. 1-7 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  43. CFD modelling for control of a chemical waste rotary kiln incinerator

    Yang, Y. & Reuter, MA., 2001, Proc. 10th IFAC Symposium on Automation in Mining, Mineral and Metal Processing (MMM 2001). Mituhiko, Araki, p. 393-398 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  44. Combustion modelling of a rotary kiln for hazardous waste incineration

    Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2003, Proc. XXII international mineral processing congress, Cape Town, South Africa. Lorenzen, L., Bradshaw, DJ., Aldrich, C., Eksteen, JJ., Wright, M. & Thom, E. (eds.). p. 1387-1395 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  45. Combustion modelling of a rotary-kiln hazardous waste incinerator

    Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2004, Proc. 23rd international conference on incineration and thermal treatment technologies - IT3, Phoenix, Arizona, USA. Press, L. & Warren, S. (eds.). Tuscon, Arizona, USA: LOI ZNC, p. 1-18 18 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  46. Combustion modelling of hazardous waste incineration

    Yang, Y., Pijnenborg, MJA. & Reuter, MA., 2003, Proc. Yazawa internatonal symposium on metallurgical and materials processing: principles and technologies, San Diego, California, USA. Sohn, HY., Itagaki, K., Yamauchi, C. & Kongoli, F. (eds.). p. 1053-1067 15 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  47. Comprehensive processing of low grade sulphidic molybdenum concentrates

    Yang, Y., van den Berg, JAM., Nauta, HHK., van Sandwijk, A. & Reuter, MA., 2002, Proc. bio- and hydrometallurgy '02: the 1st international symposium on bio- and hydrometallurgy, Cape Town, South Africa. p. 1-3 3 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  48. Computational fluid dynamics simulation of high temperature metallurgical processes.

    Yang, Y., Zhou, B., Post, JR., Scheepers, E. & Reuter, MA., 2006, Volume 1: Thermo and Physicochemical Principles: Non-Ferrous High Temperature Processing.. Kongoli, F. & Reddy, RG. (eds.). San Diego, USA: TMS, p. 583-594 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  49. Coupled DEM-CFD modelling of the iron-making blast furnace.

    Adema, AT., Yang, Y. & Boom, R., 2009, Proceedings of the 5th International Congress on the Science and Technology of Ironmaking ICTSI'09.. Yang, T. & Wang, W. (eds.). Beijing, China: The Chinese Society for Metals, p. 1085-1089 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  50. Coupled DEM-CFD modelling of the iron-making blast furnace.

    Adema, AT., Yang, Y. & Boom, R., 2009, Proceedings of the 7th International Conference on CFD in the Minerals and Process Industries.. Witt, PJ. & Schwarz, MP. (eds.). Melbourne, Australia: Springer, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  51. DEM fingerprint of a phosphorus producing submerged arc furnace B - The promise of CFD modelling.

    Scheepers, E., Yang, Y., Adema, AT., Boom, R. & Reuter, MA., 2008, Proceedings of the 24th International Minerals Processing Congress 2008.. Duo, WD., Yao, SC., Liang, WF., Cheng, ZL. & Long, H. (eds.). Beijing, PRC: Science Press, p. 2410-2421 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  52. DEM simulation of solid flow in an ironmaking blast furnace - influence of non-spherical particles.

    Adema, AT., Yang, Y. & Boom, R., 2008, Proceedings of the 24th International Minerals Processing Congress 2008.. Duo, WD., Yao, SC., Liang, WF., Cheng, ZL. & Long, H. (eds.). Beijing, PRC: Science Press, p. 2422-2429 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  53. DEM simulation of solid flow in an ironmaking blast furnace - influence of non-spherical particles.

    Adema, AT., Yang, Y. & Boom, R., 2008, Proceedings of the International Symposium on "Recent progress on mathematical modeling in ironmaking 2008.. s.n. (ed.). Tokyo, Japan: Iron and Steel Institute of Japan, p. 130-135 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  54. Eaching metallurgy and recycling in an international MSc proram in the context of metal and materials ecology

    Reuter, MA., Heiskanen, K., Boin, UMJ., van Schaik, A. & Yang, Y., 2005, Proc. EMC2005: European metallurgical conference, Dresden, Germany. s.n. (ed.). Germany: GDMB, p. 351-367 17 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  55. Effect of KAlF4 on the efficiency of hot metal desulphurisation with magnesium

    Schrama, F., Beunder, E. M., Ji, F., Woolf, R., Barnes, C., Sietsma, J., Boom, R. & Yang, Y., 2018, 8th European Oxygen Steelmaking Conference (EOSC 2018). 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  56. Effect of graphite on hot metal desulphurisation

    Schrama, F., Beunder, E. M., Visser, H-J., Boom, R., Sietsma, J. & Yang, Y., 25 Jun 2019, Proceedings of METEC & 4th ESTAD. Düsseldorf: VDeH Verlag Stahleisen, 5 p. P308

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  57. Fingerprint of a phosphorus producing submerged arc furnace a - The limits of dynamic modeling.

    Scheepers, E., Yang, Y., Boom, R. & Reuter, MA., 2008, Proceedings of the XXIV International Minerals Engineering Congress - IMPC 2008. Wang, DZ., Sun, CY., Wang, FL., Zhang, LC. & Han, L. (eds.). Beijing, China: Science Press, p. 2523-2534 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  58. Flow behaviour of shredded solid waste in a rotary kiln hazardous waste incinerator

    Yang, Y., Reuter, MA. & Verwoerd, J., 2004, Proc. 3rd international conference on combustion, incineration/pyrolysis and emission control (3rd I-CIPEC), Hangzhou, China. Beijing, China: International Academic Publishers, p. 52-87 36 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  59. Flow simulation of shredded solid waste in rotary-kiln hazardous waste incinerator

    Yang, Y., Reuter, MA. & Verwoerd, J., 2004, Proc. Rewas '04: global symposium on recycling, waste treatment and clean technology, Madrid, Spain. Gaballah, I., Mishra, B., Solozabal, R. & Tanaka, M. (eds.). Warrendale, USA: TMS, INASMET, p. 575-592 18 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  60. Hot metal flow in the hearth of a blast furnace: influence of dynamic changes dead man porosity due to coke dissolution and coke size changes

    Post, JR., Tognarelli, D., van der Stel, J., Yang, Y. & Reuter, MA., 2005, Proc. 5th European coke and ironmaking congress - 5th ECIC, Stockholm. Jernkontoret (ed.). Stockholm: Swedish Steel producers' Association, p. 1-16 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  61. Hot metal in the blast furnace hearth: thermal and carbon dissolution effects on buoyancy flow and refractory wear

    Post, JR., Peeters, T., Yang, Y. & Reuter, MA., 2003, Proc. 3rd international conference on computational fluid dynamics in the minerals and process industries (CFD-2003), Melbourne, Australia. Witt, PJ. & Schwarz, MP. (eds.). p. 433-440 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  62. Hyperspectral hydrocarbon microseepage detection: potential and limitation.

    van der Meer, FD., Dijk, P., Yang, Y., Kroonenberg, SB. & Lang, H., 2000, Proc. 2nd EARSeL Workshop on Imaging Spectroscopy. Enschede, p. 42-47 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  63. Incineration of hazardous waste in rotary kilns: better understanding through process simulation

    Yang, Y., Pijnenborg, MJA. & Reuter, MA., 2004, Proc. 2nd international conference on environmental concerns: innovative technologies and management options (ICEC-2004), Xiamen, China. et al Zhang, L. (ed.). Xiamen, China: Xiamen university, p. 1418-1428 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  64. Metal and material ecology evolving industry threats into competitive edge

    Reuter, MA., van Schaik, A. & Yang, Y., 2005, Proc. John Floyd international symposium: sustainable developments in metals processing, Melbourne, Australia. Nilmani, M. & Rankin, WJ. (eds.). Australia: NCS associates, p. 31-46 16 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  65. Metal recovery and refining from MSW incineration bottom ash.

    Yang, Y., Balentina, CF., Brouwer, D., Xiao, Y., Voncken, JHL. & Boom, R., 2008, Proceedings of the Global Symposium on Recycling, Waste Treatment and Clean Technology, REWAS 2008. Mishra, B., Ludwig, C. & Das, S. (eds.). Warrendale, PA, USA: TMS, p. 1285-1294 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  66. Metal recovery and refining from MSW incineration bottom ash.

    Yang, Y., Balentina, CF., Brouwer, D., Xiao, Y., Voncken, JHL. & Boom, R., 2008, Proceedings of XXIV International Minerals Engineering Congress - IMPC 2008. Wang, DZ., Sun, CY., Wang, FL., Zhang, LC. & Han, L. (eds.). Beijing, China: Science Press, p. 3582-3591 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  67. Metallurgical control - case studies

    Reuter, MA. & Yang, Y., 2000, Proc. MINPREX 2000, Int. Congress of Mineral Processing and Extractive Metallurgy, Melbourne, Australia. Griffiths, P. & Spry, A. (eds.). Melbourne, Australia: s.n., p. 91-101 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  68. Microstructure changes of chromite reduced with CO gas.

    Xiao, Y., Yang, Y., Holappa, L. & Boom, R., 2007, Proceedings of the 11th International Ferroalloys Congress INFACON XI.. sn (ed.). New Delhi, India: MacMillan India Ltd, p. 133-144 12 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  69. Modelling and optimisation of a secondary aluminium melting furnace

    Zhou, B., Yang, Y. & Reuter, MA., 2001, Proc. EMC 2001. Friedrichshafen, Germany, p. 84-84 1 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  70. Modelling of melting behavior of aluminium metal in molten salt and metal bath

    Zhou, B., Yang, Y. & Reuter, MA., 2003, Proc. Yazawa international symposium on metallurgical and materials processing: principles and technologies, San Diego, California, USA. Sohn, HY., Itagaki, JK., Yamauchi, C. & Kongoli, F. (eds.). p. 1249-1258 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  71. Modelling of the fuel stream and combustion in a rotary kiln hazardous waste incinerator

    Yang, Y., Pijnenborg, MJA. & Reuter, MA., 2003, Proc. 3rd international conference on computational fluid dynamics in the minerals and process industries, Melbourne, Australia. Witt, PJ. & Schwarz, MP. (eds.). p. 25-34 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  72. Modelling the inhomogeneous dead man of a blast furnace: the population blance model approach

    Post, JR., Yang, Y. & Reuter, MA., 2003, Proc. XXII international mineral processing congress, Cape Town, South Africa. Lorenzen, L., Bradshaw, DJ., Aldrich, C., Eksteen, JJ., Wright, M. & Thom, E. (eds.). p. 1396-1405 10 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  73. Pre-washing and vitrification of fly ash from a municipal solid waste incinerator.

    Xiao, Y., Harskamp, R. & Yang, Y., 2008, Proceedings of the Global Symposium on Recycling, Waste Treatment and Clean Technology, REWAS 2008. Mishra, B., Ludwig, C. & Das, S. (eds.). Warrendale, PA, USA: TMS, p. 1521-1531 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  74. Process modelling of aluminium scrap melting in a molten salt and metal bath in a rotary furnace

    Zhou, B., Yang, Y. & Reuter, MA., 2004, Proc. TMS annual meeting, Charlotte, North Carolina, USA. Tabereaux, AT. (ed.). Warrendale, USA: TMS, p. 919-924 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  75. Process modelling of aluminium scraps melting in molten salt and metal bath in a rotary furnace

    Zhou, B., Yang, Y. & Reuter, MA., 2005, Proc. Pyrometallurgy 2005 conference, Cape Town, South Africa. Wills, BA. (ed.). Mineral Engineering Internatonal, p. 1-8 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  76. Reaction kinetics and process simulation in submerged arc furnace for FeCr production

    Xiao, Y., Yang, Y. & Reuter, MA., 2002, Proc. 1st international symposium on pyrometallurgy, Cape Town, South Africa. p. 1-4 4 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  77. Reducing secondary environmental risk from municipal solid waste incineration.

    Xiao, Y., Yang, Y., Voncken, JHL., Dai, H., Liu, S. & Zhou, L., 2008, Proceedings of XXIV International Minerals Engineering Congress - IMPC 2008. Wang, DZ., Sun, CY., Wang, FL., Zhang, LC. & Han, L. (eds.). Beijing, China: Science Press, p. 3634-3644 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  78. Residence time distribution analysis (RTD) of a hazardous waste rotary iln incinerator by way of CFD simulation

    Yang, Y., Hartman, DTM. & Reuter, MA., 2000, Proc. International Conference on Applied Computational Fluid Dynamics (ACFD 2000), Beijing, China. Wu, JH. (ed.). p. 492-499 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  79. Simulation of combustion and metal heating in a mobile heat treatment furnace, multiphase phenomena and CFD modelling and simulation of engineering processes

    Yang, Y., de Jong, RA. & Reuter, MA., 2004, Proc. TMS annual meeting, Charlotte, North Carolina, USA. Nastac, L. & Li, BQ. (eds.). Warrendale, USA: TMS, p. 429-439 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  80. Simulation of gas flow and heat transfer inside a commercial hazardous waste rotary kiln incinerator

    Hartman, DTM., Yang, Y. & Reuter, MA., 2000, Proc. AFCD 2000, Int. Conference on Applied Computational Fluid Dynamics, Beijing, China. Wu, JH. (ed.). p. 476-483 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  81. Study of adsorption property of Ga(III) onto strongly basic resin for Ga extraction from Bayer liquor.

    Yang, Y., Zhao, Z., Luo, H., Hua, Z. & Ma, X., 2013, Proceedings of REWAS 2013: Enabling Materials Resource Sustainability.. Kvithyld, A., Meskers, C., Kirchain, R. & Krumdick, G. (eds.). Hoboken, NJ, USA: John Wiley & Sons, p. 27-35 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  82. Study of melting behaviour of aluminium scraps in molten melts

    Zhou, B., Yang, Y. & Reuter, MA., 2002, Proc. TMS Fall 2002 extraction and processing division meeting on recycling and waste treatment in mineral and metal processing: technical and econmic aspects, Lulea, Sweden. p. 527-537 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  83. The distributed nature of material properties and its effect on liquid flow and mass transfer in the blast furnace lower zone

    Post, JR., Husslage, WM., Yang, Y. & Reuter, MA., 2002, Proc. International blast furnace lower zone symposium, Wollongong, Australia. p. 6-1-6-13

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  84. Thermal treatment of MSW incineration ESP ash

    Xiao, Y., Wilson, N., Yang, Y. & Voncken, JHL., 2007, Recovery of Materials and Energy for Resource Efficiency. Hilty, LM., Edelmann, X. & Ruf, A. (eds.). Davos: EMPA Materials Science and Technology, p. 1-6 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  85. Understanding of hazardous waste incineration through CFD simulation

    Yang, Y., Reuter, MA., Voncken, JHL. & Verwoerd, J., 2002, Proc. TMS Annual meeting, extraction & processing division; fundamentals of advanced materials for energy conversion, Seattle, Washington, USA. Taylor, PR., Chandra, D. & Bautista, RG. (eds.). p. 409-416 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  86. Use of CFD modelling to assist control of a hazadous waste incinerator at AVR-chemie

    Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2003, Proc. IFAC workshop on new technologies for automation of metallurgical industry, Shanghai, China. Wei Wang (ed.). p. 393-398 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  87. Use of CFD to predict the performance of a heat treatment furnace

    Yang, Y., de Jong, RA. & Reuter, MA., 2005, Proc. CFD 2005 - 4th international conference computational fluid dynamics in the oil and gas, metallurgical & process industries. Page, I. & Johansen, ST. (eds.). Trondheim, Norway: SINTEF, p. 1-9 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  88. Vitrified bottom ash slag from municipal solid waste incinerators - Phase relations of CaO-SiO2-Na2O oxide system.

    Zhang, Z., Xiao, Y., Yang, Y., Boom, R. & Voncken, JHL., 2009, Proceedings of the VIII International Conference on Molten Slags, Fluxes and Salts (Molten 2009). Sanchez, M., Parra, R., Riveros, G. & Diaz, C. (eds.). Santiago, Chile: s.n., p. 43-50 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  89. Vitrified bottom ash slag from municipal solid waste incinerators - phase relations of CaO-SiO2-Na2O oxide system.

    Zhang, Z., Xiao, Y., Voncken, JHL., Yang, Y. & Boom, R., 2008, Proceedings of the XXIV International Minerals Engineering Congress - IMPC 2008. Wang, DZ., Sun, CY., Wang, FL., Zhang, LC. & Han, L. (eds.). Beijing, china: Science Press, p. 3575-3581 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientific

  90. Conference contribution › Scientific › Peer-reviewed
  91. A CFD model of a submerged arc furnace for phosphorus production.

    Scheepers, E., Adema, AT., Yang, Y., Boom, R. & Reuter, MA., 2006, Proceedings of the Fifth International Conference on Fluid Dynamics in the Process Industries.. Witt, PJ. & Schwarz, MP. (eds.). Melbourne, Australia: Springer, p. 1-7 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  92. Alloying refining of metallurgical grade silicon with rare earth elements.

    Meteleva-Fischer, YV., Yang, Y., Boom, R., Kraaijveld, B. & Kuntzel, H., 2013, Proceedings of EPD Congress 2013.. Free, ML. & Siegmund, AH. (eds.). Hoboken, NJ, USA: John Wiley & Sons, p. 377-389 13 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  93. Analysis of gas flow and mixing in a rotary kiln waste incinerator.

    Yang, Y., Rakhorst, J., Reuter, MA. & Voncken, JHL., 1999, Proceedings Second International Conference on CFD in the Minerals & Process Industries.. Schwarz, MP. (ed.). Melbourne, Australia: s.n., p. 443-448 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  94. Behavior of phosphorus during slag refining of metallurgical grade silicon.

    Meteleva, Y., Yang, Y., Boom, R., Kraaijveld, B. & Kuntzel, H., 2012, Proceedings of the Fray International Symposium. Volume 4: Materials Recycling, Silicon Photovoltaic Cells, Boron & Borates.. Kongoli, F. (ed.). Wilmington, USA: Flogen Star Outreach, p. 513-521 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  95. CFD Modelling for control of a chemcial waste rotary kiln incinerator.

    Yang, Y. & Reuter, MA., 2001, Proceedings of the 10th IFAC Symposium on automation in Mining, Mineral, and Metal Processing. sn (ed.). Grevenbroich, Germany: s.n., p. 393-398 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  96. CFD simulations of pyrometallurgical processes.

    Yang, Y., Zhou, B., Post, JR., Scheepers, E., Reuter, MA. & Boom, R., 2006, Proceedings of the Fifth International Conference on Fluid Dynamics in the Process Industries.. Witt, PJ. & Schwarz, MP. (eds.). Melbourne, Australia: Springer, p. 1-7 7 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  97. Calculation of phase equilibria relations in CaO-SiO2-FeOx-MgO system.

    Wang, N., Huang, C., Xin, H., Zou, Z., Zhang, Z., Xiao, Y. & Yang, Y., 2011, Proceedings of the 2nd International Symposium on High-Temperature Metallurgical Processing. 2011 TMS Annual Meeting & Exhibition.. Hwang, J. & Drelich, J. (eds.). Warrendale, PA, USA: Minerals, Metals and Materials Society, p. 137-142 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  98. Changes in deadman porosity due to coke dissolution and coke size changes, its influence on hot metal flow.

    Post, JR., Yang, Y., Reuter, MA. & van Stel, J., 2006, Proceedings of the 4th International Congress on the Science and Technology of Ironmaking (ICSTI '06). s.n. (ed.). Osaka, Japan: Iron and Steel Institute of Japan, p. 568-572 5 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  99. Correlation between microstructure of metallurgical grade silicon, alloying with calcium and its leaching behavior.

    Meteleva, Y., Yang, Y., Boom, R., Kraaijveld, B. & Kuntzel, H., 2012, Proceedings of the Fray International Symposium. Volume 4: Materials Recycling, Silicon Photovoltaic Cells, Boron & Borates.. Kongoli, F. (ed.). Wilmington, USA: Flogen Star Outreach, p. 497-505 9 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  100. Degradation behavior of epoxy resins in fibre metal laminates under thermal conditions.

    Zhu, G., Xiao, Y., Yang, Y., Wang, J., Sun, B. & Boom, R., 2011, Proceedings of ICEM-10. Sun, B. & Wang, J. (eds.). Shanghai, China: Jiaotong University, p. 60-65 6 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  101. Desulphurisation of Hisarna hot metal: a comparisson study based on plant data

    Schrama, F., Beunder, E. M., van Boggelen, J. W. K., Boom, R. & Yang, Y., 2017, 3rd International Conference on Science and Technology of Ironmaking & Steelmaking (STIS 2017). p. 419-422

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  102. Distribution of boron and phosphorus during alloying and slag treatment of metallurgical grade silicon.

    Meteleva-Fischer, YV., Yang, Y., Boom, R., Kraaijveld, B. & Kuntzel, H., 2012, Proceedings of EPD Congress 2012. Zhang, L., Pomykala, JA. & Ciftja, A. (eds.). Hoboken, New Jersey, USA: The Minerals, Metals & Materials Society, p. 463-470 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  103. Electrochemical recovery of rare earth elements from magnet scraps: A theoretical analysis

    Venkatesan, P., Sun, ZHI., Sietsma, J. & Yang, Y., 2014, Proceedings of the 1st European Rare Earth Resources Conference ERES 2014). Balomenos, E., Panias, D. & Paspaliaris, I. (eds.). Santorin: Heliotopos Conferences Ltd., p. 163-170 8 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  104. High temperature processing of secondary metallurgical resources.

    Xiao, Y., Yang, Y. & Boom, R., 2011, Proceedings of the Second International Slag Valorisation Symposium.. Jones, PT., Pontikes, Y., Elsen, J., Cizer, Ö., Boehme, L., van Gerven, T., Geysen, D., Guo, M. & Blanpain, B. (eds.). Leuven, Belgium: Katholieke Universiteit Leuven, p. 351-364 14 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  105. Hydrometallurgical extraction of rare earth elements from low grade mine tailings

    Peelman, S., Sun, Z., Sietsma, J. & Yang, Y., 2016, Rare Metal Technology 2016. Alam, S., Kim, H., Neelameggham, N. R., Ouchi, T. & Oosterhof, H. (eds.). Hoboken, NJ, USA: John Wiley & Sons, p. 17-29

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

  106. Leaching of rare earth elements: Past and present

    Peelman, S., Sun, ZHI., Sietsma, J. & Yang, Y., 2014, Proceedings of the 1st European Rare Earth Resources Conference. Balomenos, E., Panias, D. & Paspaliaris, I. (eds.). Santorin: Heliotopos Conferences Ltd., p. 446-456 11 p.

    Research output: Chapter in Book/Conference proceedings/Edited volumeConference contributionScientificpeer-review

ID: 108812