1. 2019
  2. The Hampering Effect of Precipitated Carbon on Hot Metal Desulfurization with Magnesium

    Schrama, F. N. H., Beunder, E. M., Visser, H. J., Sietsma, J., Boom, R. & Yang, Y., 8 Nov 2019, In : Steel Research International. 8 p., 1900441.

    Research output: Contribution to journalArticleScientificpeer-review

  3. An Investigation of Carburization Behavior of Molten Iron for the Flash Ironmaking Process

    Wang, Q., Li, G., Zhang, W. & Yang, Y., 2019, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50, 4, p. 2006-2016

    Research output: Contribution to journalArticleScientificpeer-review

  4. Characterization and feasibility studies on complete recovery of rare earths from glass Polishing waste

    Borra, C. R., Vlugt, T. J. H., Spooren, J., Nielsen, P., Yang, Y. & Offerman, S. E., 2019, In : Metals. 9, 3, 11 p., 278.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Conversion of CaTi1-xMnxO3-δ-Based Photocatalyst for Photocatalytic Reduction of NO via Structure-Reforming of Ti-Bearing Blast Furnace Slag

    Zhang, Z., Lü, H., Li, X., Li, X., Ran, S., Chen, Z., Yang, Y., Wu, X. & Li, L., 2019, In : ACS Sustainable Chemistry and Engineering. 7, 12, p. 10299-10309

    Research output: Contribution to journalArticleScientificpeer-review

  6. Decomposition behavior and reaction mechanism of Ce0.67Tb0.33MgAl11O19 during Na2CO3 assisted roasting: Toward efficient recycling of Ce and Tb from waste phosphor

    Hua, Z., Geng, A., Zhao, Z., Liu, H., Yao, Y. & Yang, Y., 2019, In : Journal of Environmental Management. 249, 109383.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Effect of nut coke addition on physicochemical behaviour of pellet bed in ironmaking blast furnace

    Gavel, D. J., Adema, A., Stel, J. V. D., Sietsma, J., Boom, R. & Yang, Y., 2019, In : ISIJ International. 59, 5, p. 778-786

    Research output: Contribution to journalArticleScientificpeer-review

  8. Leaching characteristics and mechanism of the synthetic calcium-aluminate slags for alumina recovery

    Azof, F. I., Yang, Y., Panias, D., Kolbeinsen, L. & Safarian, J., 2019, In : Hydrometallurgy. 185, p. 273-290

    Research output: Contribution to journalArticleScientificpeer-review

  9. Melting Behaviour of Iron Ore Pellet Bed under Nut Coke Mixed Charge Conditions

    Gavel, D. J., Adema, A., van der Stel, J., Kwakernaak, K., Sietsma, J., Boom, R. & Yang, Y., 2019, In : ISIJ International. 60, 3, 12 p., ISIJINT-2019-246.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Prediction of density and volume variation of hematite ore particles during in-flight melting and reduction

    Chen, Z. Y., Qu, Y. X., Zeilstra, C., Van Der Stel, J., Sietsma, J. & Yang, Y. X., 2019, In : Journal of Iron and Steel Research International. 26, 12, p. 1285-1294

    Research output: Contribution to journalArticleScientificpeer-review

  11. Use of iron reactive anode in electrowinning of neodymium from neodymium oxide

    Abbasalizadeh, A., Seetharaman, S., Venkatesan, P., Sietsma, J. & Yang, Y., 2019, In : Electrochimica Acta. 310, p. 146-152

    Research output: Contribution to journalArticleScientificpeer-review

  12. 2018
  13. Research on the Electrochemical Behavior of Si(IV) on the Tungsten Electrode in CaCl2–CaF2–CaO Molten Melt

    Jidong Li, L., Ren, H., Guo, F., Lu, J., Li, J. & Yang, Y., Sep 2018, In : Russian Journal of Non-Ferrous Metals. 59, 5, p. 486-492 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. An environmentally friendly electro-oxidative approach to recover valuable elements from NdFeB magnet waste

    Venkatesan, P., Sun, Z. H. I., Sietsma, J. & Yang, Y., 2018, In : Separation and Purification Technology. 191, p. 384-391

    Research output: Contribution to journalArticleScientificpeer-review

  15. Characterization of the burden behaviour of iron ore pellets mixed with nut coke under simulated blast furnace conditions

    Gavel, D. J., Song, Q., Adema, A., van der Stel, J., Sietsma, J., Boom, R. & Yang, Y., 2018, In : Ironmaking & Steelmaking: processes, products and applications. PP, 99, 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Effect of KAlF4 on the efficiency of hot metal desulphurisation with magnesium

    Schrama, F., Beunder, E. M., Ji, F., Woolf, R., Barnes, C., Sietsma, J., Boom, R. & Yang, Y., 2018, 8th European Oxygen Steelmaking Conference (EOSC 2018). 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  17. Experimental investigation and thermodynamic modelling of LiF-NdF3-DyF3 system

    Abbasalizadeh, A., Sridar, S., Chen, Z., Sluiter, M., Yang, Y., Sietsma, J., Seetharaman, S. & Hari Kumar, K. C., 2018, In : Journal of Alloys and Compounds. 753, p. 388-394

    Research output: Contribution to journalArticleScientificpeer-review

  18. Hydrometallurgical recovery of rare earth elements from mine tailings and WEEE

    Peelman, S., Kooijman, D., Sietsma, J. & Yang, Y., 2018, In : Journal of Sustainable Metallurgy. 4, 3, p. 367-377

    Research output: Contribution to journalArticleScientificpeer-review

  19. Molecular design of macrocyclic compounds for complete removal of thallium(I) from wastewater

    Zhao, Z., Tian, H., Zhang, M., Yang, Y. & Zhang, H., 2018, In : Environmental Science and Pollution Research. 25, 34, p. 34550-34558

    Research output: Contribution to journalArticleScientificpeer-review

  20. Numerical simulation of magnetohydrodynamic two-phase flow and heat transfer in electroslag refining of electrolytic manganese metal

    Wang, Q., Chen, Z., Li, G. & Yang, Y., 2018, Proceedings of the 7th International Congress on Science and Technology of Steelmaking (ICS 2018): The Challenge of Industry 4.0. Milan, Italy: Associazione Italiana di Metallurgia, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Quantitative study on dissolution behavior of Nd2O3 in fluoride melts

    Guo, X., Sun, Z., Sietsma, J., Blanpain, B., Guo, M. & Yang, Y., 2018, In : Industrial and Engineering Chemistry Research. 57, 5, p. 1380-1388

    Research output: Contribution to journalArticleScientificpeer-review

  22. Recovery of cerium from glass polishing waste: A critical review

    Borra, C. R., Vlugt, T. J. H., Yang, Y. & Offerman, S. E., 2018, In : Metals. 8, 10, 16 p., 801.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Recovery of neodymium as (Na, Nd)(SO4)2 from the ferrous fraction of a general WEEE shredder stream

    Peelman, S., Sietsma, J. & Yang, Y., 2018, In : Journal of Sustainable Metallurgy. 4, 2, p. 276-287

    Research output: Contribution to journalArticleScientificpeer-review

  24. Selective electrochemical extraction of REEs from NdFeB magnet waste at room temperature

    Venkatesan, P., Vander Hoogerstraete, T., Hennebel, T., Binnemans, K., Sietsma, J. & Yang, Y., 2018, In : Green Chemistry. 20, 5, p. 1065-1073

    Research output: Contribution to journalArticleScientificpeer-review

  25. Selective extraction of rare-earth elements from NdFeB magnets by a room-temperature electrolysis pretreatment step

    Venkatesan, P., Vander Hoogerstraete, T., Binnemans, K., Sun, Z., Sietsma, J. & Yang, Y., 2018, In : ACS Sustainable Chemistry and Engineering. 6, 7, p. 9375-9382

    Research output: Contribution to journalArticleScientificpeer-review

  26. Slag optimisation considering iron loss and sulphide capacity in hot metal desulphurisation

    Schrama, F. N. H., Moosavi-Khoonsari, E., Beunder, E. M., Kooij, C., Boom, R., Sietsma, J. & Yang, Y., 2018, ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0. Associazione Italiana di Metallurgia

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Thermodynamic evaluation for reduction of iron oxide ore particles in a high temperature drop tube furnace

    Chen, Z., Qu, Y., Zeilstra, C., van der Stel, J., Sietsma, J. & Yang, Y., 2018, In : Ironmaking and Steelmaking. PP, 99, 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. 2017
  29. A brief review on recovery of cerium from glass polishing waste

    Borra, C., Vlugt, T., Yang, Y. & Offerman, E., 2017, Proceedings of the 5th International Slag Valorisation Symposium. Leuven, Belgium, p. 495-498

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  30. Characterisation of glass polishing waste samples

    Borra, C., Vlugt, T., Offerman, E. & Yang, Y., 2017. 1 p.

    Research output: Contribution to conferencePosterScientific

  31. Desulphurisation of Hisarna hot metal: a comparisson study based on plant data

    Schrama, F., Beunder, E. M., van Boggelen, J. W. K., Boom, R. & Yang, Y., 2017, 3rd International Conference on Science and Technology of Ironmaking & Steelmaking (STIS 2017). p. 419-422

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Diffusion-limited dissolution of spherical particles: A critical evaluation and applications of approximate solutions

    Guo, X., Sietsma, J., Yang, Y., Sun, Z. & Guo, M., 2017, In : AIChE Journal. 63, 7, p. 2926-2934

    Research output: Contribution to journalArticleScientificpeer-review

  33. Effective treatment for electronic waste - Selective recovery of copper by combining electrochemical dissolution and deposition

    Haccuria, E., Ning, P., Cao, H., Venkatesan, P., Jin, W., Yang, Y. & Sun, Z., 2017, In : Journal of Cleaner Production. 152, p. 150-156 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Electrochemical behavior of Neodymium and formation of Mg-Nd alloys in molten Chlorides

    Hua, Z., Liu, H., Wang, J., He, J., Xiao, S., Xiao, Y. & Yang, Y., 2017, In : ACS Sustainable Chemistry and Engineering. 5, 9, p. 8089-8096

    Research output: Contribution to journalArticleScientificpeer-review

  35. Electrochemical extraction of rare earth metals in molten fluorides: Conversion of rare earth oxides into rare earth fluorides using fluoride additives

    Abbasalizadeh, A., Malfliet, A., Seetharaman, S., Sietsma, J. & Yang, Y., 2017, In : Journal of Sustainable Metallurgy. 3, 3, p. 627–637

    Research output: Contribution to journalArticleScientificpeer-review

  36. Electrochemical recovery of rare earth elements from magnets: Conversion of rare earth based metals into rare earth fluorides in molten salts

    Abbasalizadeh, A., Malfliet, A., Seetharaman, S., Sietsma, J. & Yang, Y., 2017, In : Materials Transactions. 58, 3, p. 400-405

    Research output: Contribution to journalArticleScientificpeer-review

  37. Electrochemical studies on the redox behavior of zirconium in the LiF-NaF eutectic melt

    Xu, L., Xiao, Y., Xu, Q., van Sandwijk, A., Zhao, Z., Song, Q., Cai, Y. & Yang, Y., 2017, In : Journal of Nuclear Materials. 488, p. 295-301

    Research output: Contribution to journalArticleScientificpeer-review

  38. Electrochemistry during efficient copper recovery from complex electronic waste using ammonia based solutions

    Sun, Z., Cao, H., Venkatesan, P., Jin, W., Xiao, Y., Sietsma, J. & Yang, Y., 2017, In : Frontiers of Chemical Science and Engineering. 11, 3, p. 308-316

    Research output: Contribution to journalArticleScientificpeer-review

  39. Electrochemistry of zirconium in molten chlorides

    Xu, L., Xiao, Y., Xu, Q., Song, Q. & Yang, Y., 2017, In : International Journal of Electrochemical Science. 12, 7, p. 6393-6403

    Research output: Contribution to journalArticleScientificpeer-review

  40. Gas permeability in cohesive zone in the ironmaking blast furnace

    Ishii, J., Murai, R., Sumi, I., Yongxiang, Y., Yang, Y. & Boom, R., 2017, In : ISIJ International. 57, 9, p. 1531-1536 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Identification and recovery of rare-earth permanent magnets from waste electrical and electronic equipment

    Lixandru, A., Venkatesan, P., Jönsson, C., Poenaru, I., Hall, G. B., Yang, Y., Walton, A., Güth, K., Gauß, R. & Gutfleisch, O., 2017, In : Waste Management. 68, p. 482-489

    Research output: Contribution to journalArticleScientificpeer-review

  42. Novel reactive anode for electrochemical extraction of rare earth metals from rare earth oxides

    Abbasalizadeh, A., Seetharaman, S., Venkatesan, P., Sietsma, J. & Yang, Y., 2017, Rare Metal Technology 2017: Proceedings. Kim, H., Alam, S., Neelameggham, N. R., Oosterhof, H., Ouchi, T. & Guan, X. (eds.). Cham, Switzerland: Springer, p. 87-92 (The Minerals, Metals & Materials Series).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  43. REE Recovery from End-of-Life NdFeB Permanent Magnet Scrap: A Critical Review

    Yang, Y., Walton, A., Sheridan, R., Güth, K., Gauß, R., Gutfleisch, O., Buchert, M., Steenari, B-M., Van Gerven, T., Jones, P. T. & Binnemans, K., 2017, In : Journal of Sustainable Metallurgy. 3, 1, p. 122-149

    Research output: Contribution to journalArticleScientificpeer-review

  44. Recovery of valuable metals from waste diamond cutters through ammonia–ammonium sulfate leaching

    Xue, P., Li, G. Q., Yang, Y. X., Qin, Q. W. & Wei, M. X., 2017, In : International Journal of Minerals Metallurgy and Materials. 24, 12, p. 1352-1360

    Research output: Contribution to journalArticleScientificpeer-review

  45. Sulphur removal in ironmaking and oxygen steelmaking

    Schrama, F. N. H., Beunder, E. M., van den Berg, B., Yang, Y. & Boom, R., 2017, In : Ironmaking & Steelmaking: processes, products and applications. 44, 5, p. 333-343

    Research output: Contribution to journalArticleScientificpeer-review

  46. Thermal degradation behaviour of resins in aluminium composite under isothermal condition

    Zhu, G., Wang, W., Wang, R., Xiao, Y., Yang, Y., Dong, A., Wang, D., Shu, D., Wang, J., Sun, B. & Boom, R., 2017, In : Polymer Testing. 61, p. 448-454

    Research output: Contribution to journalArticleScientificpeer-review

  47. 2016
  48. A critical evaluation of solubility of rare earth oxides in molten fluorides

    Guo, X., Sietsma, J. & Yang, Y., 2016, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Leal Filho, W. (eds.). Elsevier, p. 223-234

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  49. Adsorption performances and mechanisms of amidoxime resin toward Gallium(III) and Vanadium(V) from Bayer liquor

    Zhao, Z., Li, X., Chai, Y., Hua, Z., Xiao, Y. & Yang, Y., 2016, In : ACS Sustainable Chemistry and Engineering. 4, 1, p. 53-59 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  50. Complex electronic waste treatment: An effective process to selectively recover copper with solutions containing different ammonium salts

    Sun, Z., Xiao, Y., Sietsma, J., Agterhuis, H. & Yang, Y., 2016, In : Waste Management. 57, p. 140–148

    Research output: Contribution to journalArticleScientificpeer-review

  51. Electrochemical behavior of zirconium in molten LiF-KF-ZrF4 at 600 °C

    Xu, L., Xiao, Y., Xu, Q., Van Sandwijk, A., Li, J., Zhao, Z., Song, Q. & Yang, Y., 2016, In : RSC Advances. 6, 87, p. 84472-84479

    Research output: Contribution to journalArticleScientificpeer-review

  52. Hydrometallurgical extraction of rare earth elements from low grade mine tailings

    Peelman, S., Sun, Z., Sietsma, J. & Yang, Y., 2016, Rare Metal Technology 2016. Alam, S., Kim, H., Neelameggham, N. R., Ouchi, T. & Oosterhof, H. (eds.). Hoboken, NJ, USA: Wiley & Sons, p. 17-29

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  53. Leaching of rare earth elements: Review of past and present technologies

    Peelman, S., Sun, Z., Sietsma, J. & Yang, Y., 2016, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Leal Filho, W. (eds.). Elsevier, p. 319-334

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  54. Rare earth extraction from NdFeB magnets and rare earth oxides using aluminum chloride/fluoride molten salts

    Abbasalizadeh, A., Teng, L., Seetharaman, S., Sietsma, J. & Yang, Y., 2016, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Leal Filho, W. (eds.). Elsevier, p. 357-373

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  55. Recycling of metals from urban mines - A strategic evaluation

    Sun, ZHI., Xiao, Y., Agterhuis, H., Sietsma, J. & Yang, Y., 2016, In : Journal of Cleaner Production. 112, Part 4, p. 2977-2987

    Research output: Contribution to journalArticleScientificpeer-review

  56. Semiempirical model for the solubility of rare earth oxides in molten fluorides

    Guo, X., Sun, Z., Sietsma, J. & Yang, Y., 2016, In : Industrial and Engineering Chemistry Research. 55, 16, p. 4773-4781

    Research output: Contribution to journalArticleScientificpeer-review

  57. Subject-specific channel selection using time information for motor imagery brain-computer interfaces

    Yang, Y., Bloch, I., Chevallier, S. & Wiart, J., 2016, In : Cognitive Computation. 8, 3, p. 505 - 518

    Research output: Contribution to journalArticleScientificpeer-review

  58. Toward sustainability for recovery of critical metals from electronic waste: The hydrochemistry processes

    Sun, Z., Cao, C., Xiao, Y., Sietsma, J., Jin, W., Agterhuis, H. & Yang, Y., 2016, In : ACS Sustainable Chemistry and Engineering. 5, 1, p. 21-40

    Research output: Contribution to journalArticleScientificpeer-review

  59. Zirconium and hafnium separation with molten salt extraction in Sn–Cu–Zr–Hf and Cu–Zr–Hf alloy systems

    Xu, L., Xiao, Y., van Sandwijk, A., Zhao, Z., Li, J., Xu, Q. & Yang, Y., 2016, In : Separation Science and Technology (Philadelphia). 51, 10, p. 1664-1674

    Research output: Contribution to journalArticleScientificpeer-review

  60. 2015
  61. A cleaner process for selective recovery of valuable metals from electronic waste of complex mixtures of end-of-life electronic products

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H. & Yang, Y., 2015, In : Environmental Science & Technology (Washington). 49, 13, p. 7981-7988 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  62. Binding mechanism of the amidoxime functional group on chelating resins toward Gallium(III) in Bayer liquor

    Long, H., Zhao, Z., Chai, Y., Li, X., Hua, Z., Xiao, Y. & Yang, Y., 2015, In : Industrial and Engineering Chemistry Research. 54, 33, p. 8025-8030

    Research output: Contribution to journalArticleScientificpeer-review

  63. Characterisation of metals in the electronic waste of complex mixtures of end-of-life ICT products for development of cleaner recovery technology

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H., Visser, G. & Yang, Y., 2015, In : Waste Management. 35, p. 227-235

    Research output: Contribution to journalArticleScientificpeer-review

  64. Effect of nut coke on the reduction behavior in iron-making blast furnace

    Song, Q., Yang, Y. & Boom, R., 2015, In : Baosteel Technical Research. 9, 3, p. 8-16

    Research output: Contribution to journalArticleScientific

  65. Extraction of rare earth elements from NdFeB scrap by AlF3¿NaF melts

    Hua, ZS., Wang, L., Wang, J., Xiao, YP., Yang, Y., Zhao, Z. & Liu, MJ., 2015, In : Materials Science and Technology. 31, 8, p. 1007-1010 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  66. Kinetic study on gas molten particle reduction of iron ore fines at high temperature

    Qu, Y., Yang, Y., Zou, Z., Zeilstra, C., Meijer, K. & Boom, R., 2015, In : Ironmaking & Steelmaking: processes, products and applications. 42, 10, p. 763-773

    Research output: Contribution to journalArticleScientificpeer-review

  67. Melting and reduction behaviour of individual fine hematite ore particles

    Qu, Y., Yang, Y., Zou, Z., Zeilstra, C., Meijer, K. & Boom, R., 2015, In : ISIJ International. 55, 1, p. 149-157

    Research output: Contribution to journalArticleScientificpeer-review

  68. Production of nuclear grade zirconium: A review

    Xu, L., Xiao, Y., van Sandwijk, A., Xu, Q. & Yang, Y., 2015, In : Journal of Nuclear Materials. 466, p. 21-28 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  69. Rare-earth elements recovery from post-consumer hard-disc drives

    Abrahami, ST., Xiao, Y. & Yang, Y., 2015, In : Mineral Processing and Extractive Metallurgy (Trans. Insti. Min. Metall. C). 124, 2, p. 106-115 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  70. Reduction kinetics of fine hematite ore particles with a high temperature drop tube furnace

    Qu, Y., Yang, Y., Zou, Z., Zeilstra, C., Meijer, K. & Boom, R., 2015, In : ISIJ International. 55, 5, p. 952-960

    Research output: Contribution to journalArticleScientificpeer-review

  71. Selective copper recovery from complex mixtures of end-of-life electronic products with ammonia-based solution

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H., Visser, G. & Yang, Y., 2015, In : Hydrometallurgy. 152, p. 91-99 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  72. Simultaneous electrochemical recovery of rare earth elements and iron from magnet scrap: A theoretical analysis

    Venkatesan, P., Sun, Z., Sietsma, J. & Yang, Y., 2015, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Filho, WL. (eds.). Amsterdam, The Netherlands: Elsevier, p. 335-346

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  73. 2014
  74. Electrochemical recovery of rare earth elements from magnet scraps: A theoretical analysis

    Venkatesan, P., Sun, ZHI., Sietsma, J. & Yang, Y., 2014, Proceedings of the 1st European Rare Earth Resources Conference ERES 2014). Balomenos, E., Panias, D. & Paspaliaris, I. (eds.). Santorin: Heliotopos Conferences Ltd., p. 163-170 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  75. Experimental study on the effect of using nut coke on the permeability of packed beds in blast furnaces

    Song, Q., Yang, Y., Li, X. & Boom, R., 2014, In : Baosteel Technical Research. 8, 4, p. 15-19

    Research output: Contribution to journalArticleScientific

  76. Ironmaking

    Yang, Y., Raipala, K. & Holappa, L., 2014, Treatise on process metallurgy. Volume 3: Industrial processes. Seetharaman, S. (ed.). Amsterdam: Elsevier Science, p. 2-88 1745 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  77. Leaching of rare earth elements: Past and present

    Peelman, S., Sun, ZHI., Sietsma, J. & Yang, Y., 2014, Proceedings of the 1st European Rare Earth Resources Conference. Balomenos, E., Panias, D. & Paspaliaris, I. (eds.). Santorin: Heliotopos Conferences Ltd., p. 446-456 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  78. New routes for the production of reactor grade zirconium.

    Xiao, Y., Sandwijk, A., Yang, Y. & Laging, V., 2014, Molten Salts Chemistry and Technology. Gaune-Escard, M. & Haarberg, GM. (eds.). Chichester, West Sussex, UK: Wiley, p. 391-401 632 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  79. Phase equilibria in the CaO·SiO2-Na2O·SiO2-Na2O·Al2O3·6SiO2 system

    Zhang, Z., Xiao, E., Voncken, JHL., Yang, Y., Boom, R., Wang, N., Zou, Z. & Li, G., 2014, In : Journal of the European Ceramic Society. 34, 2, p. 533-539 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  80. REE recovery from end-of-life permanent magnet scrap: An overview

    Yang, Y., 2014, In : Science Foundation in China. 22, Supplement, p. 113-126 14 p.

    Research output: Contribution to journalArticleProfessional

  81. Rare earth extraction from NdFeB magnet and rare earth oxides using molten salt processes

    Abbasalizadeh, A., Teng, L., Seetharaman, S., Sietsma, J. & Yang, Y., 2014, Proceedings of the 1st European Rare Earth Resources Conference. Balomenos, E., Panias, D. & Paspaliaris, I. (eds.). Santorin: Heliotopos Conferences Ltd., p. 178-189 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  82. Recovery of rare earth metals from end-of-life permanent magnet scrap: An overview

    Yang, Y., 2014, Proceedings of the 1st European Rare Earth Resources Conference. Balomenos, E., Panias, D. & Paspaliaris, I. (eds.). Santorin: Heliotopos Conferences Ltd., p. 429-445 17 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  83. Recovery of valuable metals from mixture of end-of-life electronic products - a hydrometallurgy path.

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H., de Visser, G. & Yang, Y., 2014, Proceedings of Going Green Care Innovation Conference 2014. Vienna, Austria: Austrian Society for Systems Engineering and Automation, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  84. Selective extraction of rare earth elements from NdFeB scrap by molten chlorides

    Hua, Z., Wang, J., Wang, L., Zhao, Z., Li, X., Xiao, Y. & Yang, Y., 2014, In : ACS Sustainable Chemistry and Engineering. 2, 11, p. 2536-2543 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  85. Separation of zirconium and hafnium: a review.

    Xu, L., Xiao, Y., van Sandwijk, A., Xu, Q. & Yang, Y., 2014, Energy Materials 2014. s.n. (ed.). Hoboken, New Jersey: John Wiley & Sons, Inc., p. 451-457 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  86. Solubility of rare earth oxides in molten fluorides

    Guo, X., Sietsma, J. & Yang, Y., 2014, Proceedings of the 1st European Rare Earth Resources Conference. Balomenos, E., Panias, D. & Paspaliaris, I. (eds.). Santorin: Heliotopos Conferences Ltd., p. 149-155 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  87. Strategic evaluations on electronic wastes for metal recycling.

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H., de Visser, G. & Yang, Y., 2014.

    Research output: Contribution to conferencePosterProfessional

  88. Thermal decomposition behaviour of fine iron ore particles

    Qu, Y., Yang, Y., Zou, Z., Zeilstra, C., Meijer, K. & Boom, R., 2014, In : ISIJ International. 54, 10, p. 2196-2205 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  89. 2013
  90. Alloying refining of metallurgical grade silicon with rare earth elements.

    Meteleva-Fischer, YV., Yang, Y., Boom, R., Kraaijveld, B. & Kuntzel, H., 2013, Proceedings of EPD Congress 2013.. Free, ML. & Siegmund, AH. (eds.). Hoboken, NJ, USA: John Wiley & Sons, Inc., p. 377-389 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  91. Hydrometallurgical recovery of copper from complex mixtures of end-of-life shredded ICT products

    Xiao, Y., Yang, Y., van den Berg, JAM., Sietsma, J., Agterhuis, H., de Visser, G. & Bol, D., 2013, In : Hydrometallurgy. 140, p. 128-134 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  92. Liquidus and phase equilibria in CaO-Al2O3-FeOx-SiO2 system under intermediate oxygen partial pressure

    Wang, N., Chen, M., Zou, Z., Zhang, Z., Xiao, Y. & Yang, Y., 2013, In : Journal of Mining and Metallurgy. Section B: Metallurgy. 49, 2, p. 139-144 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  93. Metal recovery from industrial solid waste - Contribution to resource sustainability.

    Yang, Y., 2013, Proceedings of REWAS 2013: Enabling Materials Resource Sustainability.. Kvithyld, A., Meskers, C., Kirchain, R. & Krumdick, G. (eds.). Hoboken, NJ, USA: John Wiley & Sons, p. 377-389 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  94. Poster: Recovery of REE from EoL permanent magnets.

    Yang, Y., 2013.

    Research output: Contribution to conferencePosterProfessional

  95. Preparation and characterization of fibrous copper powder used for conductive filler.

    Fan, Y., Yang, Y., Xiao, Y. & Zhao, Z., 2013, Proceedings of REWAS 2013: Enabling Materials Resource Sustainability.. Kvithyld, A., Meskers, C., Kirchain, R. & Krumdick, G. (eds.). Hoboken, NJ, USA: John Wiley & Sons, p. 122-132 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  96. Recovery of rare earth elements from EOL permanent magnets with molten slag extraction.

    Yang, Y., Abrahami, ST. & Xiao, Y., 2013, Proceedings of the 3rd International Slag Valorisation Symposium.. Jones, PT. (ed.). Leuven, Belgium: ACCO, p. 249-252 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  97. Recovery of tellurium from high tellurium-bearing materials by alkaline pressure leaching process: Thermodynamic evolution and experimental study.

    Fan, Y., Yang, Y., Xiao, Y., Zhao, Z. & Lei, Y., 2013, In : Hydrometallurgy. 139, p. 95-99 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  98. Recycling as a strategy against rare earth element criticality: A systemic evaluation of the potential yield of NdFeB magnet recycling.

    Rademaker, JH., Kleijn, R. & Yang, Y., 2013, In : Environmental Science & Technology (Washington). 47, p. 10129-10136 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  99. Recycling of rare earths: a critical review.

    Binnemans, K., Jones, PT., Blanpain, B., Van Gerven, T., Yang, Y., Walton, A. & Buchert, M., 2013, In : Journal of Cleaner Production. 51, p. 1-22 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  100. Study of adsorption property of Ga(III) onto strongly basic resin for Ga extraction from Bayer liquor.

    Yang, Y., Zhao, Z., Luo, H., Hua, Z. & Ma, X., 2013, Proceedings of REWAS 2013: Enabling Materials Resource Sustainability.. Kvithyld, A., Meskers, C., Kirchain, R. & Krumdick, G. (eds.). Hoboken, NJ, USA: John Wiley & Sons, p. 27-35 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  101. Thermal processing of industrial ashes for ferrovanadium production.

    Xiao, Y., Yang, Y., Lai, A. & Boom, R., 2013, Proceedings of REWAS 2013: Enabling Materials Resource Sustainability.. Kvithyld, A., Meskers, C., Kirchain, R. & Krumdick, G. (eds.). Hoboken, NJ, USA: John Wiley & Sons, p. 44-53 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  102. 2012
  103. Behavior of phosphorus during slag refining of metallurgical grade silicon.

    Meteleva, Y., Yang, Y., Boom, R., Kraaijveld, B. & Kuntzel, H., 2012, Proceedings of the Fray International Symposium. Volume 4: Materials Recycling, Silicon Photovoltaic Cells, Boron & Borates.. Kongoli, F. (ed.). Wilmington, USA: Flogen Star Outreach, p. 513-521 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  104. Correlation between microstructure of metallurgical grade silicon, alloying with calcium and its leaching behavior.

    Meteleva, Y., Yang, Y., Boom, R., Kraaijveld, B. & Kuntzel, H., 2012, Proceedings of the Fray International Symposium. Volume 4: Materials Recycling, Silicon Photovoltaic Cells, Boron & Borates.. Kongoli, F. (ed.). Wilmington, USA: Flogen Star Outreach, p. 497-505 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  105. Degradation behavior of epoxy resins in fibre metal laminates under thermal conditions.

    Zhu, G., Xiao, Y., Yang, Y., Wang, J., Sun, B. & Boom, R., 2012, In : Journal of Shanghai Jiaotong University (Science). 17, 3, p. 257-262 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  106. Distribution of boron and phosphorus during alloying and slag treatment of metallurgical grade silicon.

    Meteleva-Fischer, YV., Yang, Y., Boom, R., Kraaijveld, B. & Kuntzel, H., 2012, Proceedings of EPD Congress 2012. Zhang, L., Pomykala, JA. & Ciftja, A. (eds.). Hoboken, New Jersey, USA: The Minerals, Metals & Materials Society, p. 463-470 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  107. Elemental sustainability: Towards the total recovery of scarce metals.

    Dodson, JR., Hunt, AJ., Parker, HL., Yang, Y. & Clark, JH., 2012, In : Chemical Engineering and Processing: process intensification. 51, p. 69-78 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  108. Microstructure of metallurgical grade silicon during alloying refining with calcium.

    Meteleva-Fischer, YV., Yang, Y., Boom, R., Kraaijveld, B. & Kuntzel, H., 2012, In : Intermetallics. 25, p. 9-17 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  109. Phase equilibria at liquidus temperatures of the CaO.SiO2-Na2O.SiO2-Na2O.Al2O3.6SiO2 slag system

    Zhang, Z., Xiao, Y., Voncken, JHL., Yang, Y., Boom, R., Wang, N. & Zou, Z., 2012, Proceedings of MOLTEN 2012. s.n. (ed.). Beijing, China: University of Science and Technology Beijing, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  110. Recovery of gallium from Bayer liquor: A review.

    Zhao, Z., Yang, Y., Xiao, Y. & Fan, Y., 2012, In : Hydrometallurgy. 125-126, p. 115-124 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  111. Recycling of aluminium from fibre metal laminates.

    Zhu, G., Xiao, Y., Yang, Y., Wang, J., Sun, B. & Boom, R., 2012, In : Journal of Shanghai Jiaotong University (Science). 17, 3, p. 263-267 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  112. Recyling of composite materials.

    Yang, Y., Boom, R., Irion, B., van Heerden, DJ., Kuiper, P. & de Wit, JHW., 2012, In : Chemical Engineering and Processing: process intensification. 51, p. 53-68 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  113. Slag treatment followed by acid leaching as a route to solar-grade silicon

    Meteleva-Fischer, YV., Yang, Y., Boom, R., Kraaijveld, B. & Kuntzel, H., 2012, In : JOM. 64, 8, p. 957-967 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  114. Solubility of ZrO2 in molten salt system.

    Xiao, Y., Laging, VJW., van Sandwijk, A. & Yang, Y., 2012, Metals and Materials Processing in a Clean Environment, Volume 3: Molten Salts & Ionic Liquids 2011. Kongoli, F. (ed.). Wilmington, USA: Flogen Technologies, p. 135-140 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  115. Thermal decomposition of fine iron ore in a drop tube furnace.

    Qu, Y., Yang, Y., Zeilstra, C., Meijer, K. & Boom, R., 2012, Proceedings of SCANMET IV. s.n. (ed.). Luleå, Sweden: Swerea MEFOS, p. 541-551 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  116. Thermodynamic assessment of the CaO-Na2O-SiO2 slag system.

    Zhang, Z., Xiao, Y., Voncken, JHL., Yang, Y., Boom, R., Wang, N. & Zou, Z., 2012, Proceedings of MOLTEN 2012. s.n. (ed.). Beijing, China: University of Science and Technology Beijing, p. 12-22 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  117. 2011
  118. Calculation of phase equilibria relations in CaO-SiO2-FeOx-MgO system.

    Wang, N., Huang, C., Xin, H., Zou, Z., Zhang, Z., Xiao, Y. & Yang, Y., 2011, Proceedings of the 2nd International Symposium on High-Temperature Metallurgical Processing. 2011 TMS Annual Meeting & Exhibition.. Hwang, J. & Drelich, J. (eds.). Warrendale, PA, USA: Minerals, Metals and Materials Society, p. 137-142 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  119. Degradation behavior of epoxy resins in fibre metal laminates under thermal conditions.

    Zhu, G., Xiao, Y., Yang, Y., Wang, J., Sun, B. & Boom, R., 2011, Proceedings of ICEM-10. Sun, B. & Wang, J. (eds.). Shanghai, China: Jiaotong University, p. 60-65 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  120. Diffusion mechanisms of vacancy and doped Si in Al3Ti from first-principles calculations.

    Zhu, G., Dai, Y., Shu, D., Xiao, Y., Yang, Y., Wang, J., Sun, B. & Boom, R., 2011, In : Intermetallics. 19, p. 1036-1040 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  121. Effect of oxygen partial pressure and temperature on liquidus for the CaO-SiO2-FeOx-Al2O3 system

    Wang, N., Zou, Z., Zhang, Z., Xiao, Y. & Yang, Y., 2011, In : Advanced Materials Research. 295-297, p. 2279-2282 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  122. First-principles study of point defects and Si site preference in Al3Ti.

    Zhu, G., Dai, Y., Shu, D., Xiao, Y., Yang, Y., Wang, J. & Sun, B., 2011, In : Computational Materials Science. 50, p. 2636-2639 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  123. High temperature processing of secondary metallurgical resources.

    Xiao, Y., Yang, Y. & Boom, R., 2011, Proceedings of the Second International Slag Valorisation Symposium.. Jones, PT., Pontikes, Y., Elsen, J., Cizer, Ö., Boehme, L., van Gerven, T., Geysen, D., Guo, M. & Blanpain, B. (eds.). Leuven, Belgium: Katholieke Universiteit Leuven, p. 351-364 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  124. Phase equilibria in the Na2O-CaO-SiO2 system.

    Zhang, Z., Xiao, Y., Voncken, JHL., Yang, Y., Boom, R., Wang, N. & Zou, Z., 2011, In : Journal of the American Ceramic Society. 94, 9, p. 3088-3093 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  125. Poster: Coupled DEM - CFD study of the blast furnace cohesive zone.

    Enqvist-Yuko, M., Adema, AT., Tathavadkar, VD., Yang, Y. & Boom, R., 2011.

    Research output: Contribution to conferencePosterProfessional

  126. Poster: Intermetallic aspects in refining of metallurgical grade silicon.

    Meteleva-Fischer, YV., Yang, Y. & Boom, R., 2011.

    Research output: Contribution to conferencePosterProfessional

  127. Poster: Solar grade silicon: Challenges and achievements.

    Meteleva-Fischer, YV., Yang, Y., Boom, R., Kraaijveld, B. & Kuntzel, H., 2011.

    Research output: Contribution to conferencePosterProfessional

  128. Potential routes for recycling and reuse of silicon kerf.

    Xiao, Y. & Yang, Y., 2011, In : Advanced Materials Research. 295-297, p. 2235-2240 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  129. Recycling of aluminium from fibre metal laminates.

    Zhu, G., Xiao, Y., Yang, Y., Wang, J., Sun, B. & Boom, R., 2011, Proceedings of ICEM-10. Sun, B. & Wang, J. (eds.). Shanghai, China: Jiaotong University, p. 38-43 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  130. Recycling of fiber-metal laminates.

    Yang, Y., Zhu, G. & Xiao, Y., 2011, In : Advanced Materials Research. 295-297, p. 2329-2332 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  131. Resource recovery from MSW incinerator bottom ash.

    Yang, Y. & Xiao, Y., 2011, Proceedings of the Conference "Sustainability through Resource Conservation and Recyling".. s.n. (ed.). Falmouth, United Kingdom: Minerals Engineering International, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  132. Thermodynamics of slag formation in multi-component oxide systems in thermal processing of incineration bottom ash - Equilibrium phase relation in CaO-SiO2-FeOx-MgO system.

    Wang, N., Zou, Z., Zhang, Z., Xiao, Y. & Yang, Y., 2011, In : Advanced Materials Research. 194-196, p. 2175-2178 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  133. Urban mining: contribution to the mitigation of resource scarcity.

    Yang, Y. & Meskers, CEM., 2011, Jaarboek van de Mijnbouwkundige Vereeniging te Delft, 73e editie, 2010-2011. s.n. (ed.). Delft, The Netherlands: Mijnbouwkundige Vereeniging Delft, p. 150-160 384 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  134. 2010
  135. Discrete element method - computational fluid dynamic (DEM-CFD) simulation of the materials flow in an iron-making blast furnace.

    Adema, AT., Yang, Y. & Boom, R., 2010, In : ISIJ International. 50, 7, p. 954-961 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  136. Ferrovanadium production from petroleum fly ash and BOF flue dust.

    Xiao, Y., Jalkanen, HK., Yang, Y., Mambote, MCR. & Boom, R., 2010, In : Minerals Engineering. 23, 10, p. 1155-1157 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  137. Metallurgical recycling of silion kerf from wafer sawing slurry.

    Xiao, Y., Mambote, MCR., Yang, Y. & Bruijn, A., 2010, Proceedings of the 3rd International Conference on Engineering for Waste and Biomass Valorisation.. Nzihou, A. & Liu, H. (eds.). Albi, France: Ecole des Mines d'Albi-Carmaux, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  138. Poster: Alloying as a first step in refining of metallurgical grade silicon

    Meteleva-Fischer, YV., Yang, Y. & Boom, R., 2010.

    Research output: Contribution to conferencePosterProfessional

  139. Process modelling and optimization of a submerged arc furnace for phosphorus production.

    Scheepers, E., Yang, Y., Adema, AT., Boom, R. & Reuter, MA., 2010, In : Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science. 41B, 5, p. 990-1005 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  140. Thermal processing of petroleum fly ash for vanadium recovery.

    Xiao, Y., Jalkanen, HK., Yang, Y., Mambote, MCR. & Boom, R., 2010, Proceedings of the XXV International Mineral Processing Congress (IMPC 2010). s.n. (ed.). Brisbane, Australia: The Australasian Institute of Mining and Metallurgy, p. 1643-1652 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  141. Vanadium recovery as FeV from petroleum fly ash.

    Xiao, Y., Mambote, MCR., Jalkanen, HK., Yang, Y. & Boom, R., 2010, Proceedings of the Twelfth International Ferroalloys Congress - Sustainable Future (INFACON XII). Vartiainen, A. (ed.). Helsinki, Finland: Outec Oyj, p. 179-188 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  142. Zinc recovery from zinc ferrite - bearing industrial residues.

    Yang, Y., Kemperman, D. & Xiao, Y., 2010, Proceedings of the 3rd International Conference on Engineering for Waste and Biomass Valorisation.. Nzihou, A. & Liu, H. (eds.). Albi, France: Ecole des Mines d'Albi-Carmaux, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  143. 2009
  144. Coupled DEM-CFD modelling of the iron-making blast furnace.

    Adema, AT., Yang, Y. & Boom, R., 2009, Proceedings of the 5th International Congress on the Science and Technology of Ironmaking ICTSI'09.. Yang, T. & Wang, W. (eds.). Beijing, China: The Chinese Society for Metals, p. 1085-1089 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  145. Coupled DEM-CFD modelling of the iron-making blast furnace.

    Adema, AT., Yang, Y. & Boom, R., 2009, Proceedings of the 7th International Conference on CFD in the Minerals and Process Industries.. Witt, PJ. & Schwarz, MP. (eds.). Melbourne, Australia: CSIRO, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  146. Distribution of metals in the mineral fraction of PST process at high temperatures.

    Yang, Y. & Xiao, Y., 2009, Delft: Technische Universiteit Delft. 46 p.

    Research output: Book/ReportReportProfessional

  147. Thermal behaviour of ESP ash from municipal solid waste incinerators

    Yang, Y., Xiao, Y., Wilson, N. & Voncken, JHL., 2009, In : Journal of Hazardous Materials. 166, 1, p. 567-575 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  148. Vitrified bottom ash slag from municipal solid waste incinerators - Phase relations of CaO-SiO2-Na2O oxide system.

    Zhang, Z., Xiao, Y., Yang, Y., Boom, R. & Voncken, JHL., 2009, Proceedings of the VIII International Conference on Molten Slags, Fluxes and Salts (Molten 2009). Sanchez, M., Parra, R., Riveros, G. & Diaz, C. (eds.). Santiago, Chile: s.n., p. 43-50 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  149. Zinc recovery from the HDG bottom dross.

    Yang, Y., 2009, Delft: Technische Universiteit Delft. 24 p.

    Research output: Book/ReportReportProfessional

  150. 2008
  151. Computational fluid dynamic modelling of a waste-heat boiler associated with flash smelting of base metal sulphides.

    Bezuidenhout, JJ., Yang, Y. & Eksteen, JJ., 2008, In : South African Institute of Mining and Metallurgy. Journal. 108, p. 179-188 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  152. DEM fingerprint of a phosphorus producing submerged arc furnace B - The promise of CFD modelling.

    Scheepers, E., Yang, Y., Adema, AT., Boom, R. & Reuter, MA., 2008, Proceedings of the 24th International Minerals Processing Congress 2008.. Duo, WD., Yao, SC., Liang, WF., Cheng, ZL. & Long, H. (eds.). Beijing, PRC: Science Press, p. 2410-2421 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  153. DEM simulation of solid flow in an ironmaking blast furnace - influence of non-spherical particles.

    Adema, AT., Yang, Y. & Boom, R., 2008, Proceedings of the 24th International Minerals Processing Congress 2008.. Duo, WD., Yao, SC., Liang, WF., Cheng, ZL. & Long, H. (eds.). Beijing, PRC: Science Press, p. 2422-2429 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  154. DEM simulation of solid flow in an ironmaking blast furnace - influence of non-spherical particles.

    Adema, AT., Yang, Y. & Boom, R., 2008, Proceedings of the International Symposium on "Recent progress on mathematical modeling in ironmaking 2008.. s.n. (ed.). Tokyo, Japan: Iron and Steel Institute of Japan, p. 130-135 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  155. Fingerprint of a phosphorus producing submerged arc furnace a - The limits of dynamic modeling.

    Scheepers, E., Yang, Y., Boom, R. & Reuter, MA., 2008, Proceedings of the XXIV International Minerals Engineering Congress - IMPC 2008. Wang, DZ., Sun, CY., Wang, FL., Zhang, LC. & Han, L. (eds.). Beijing, China: Science Press, p. 2523-2534 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  156. Metal recovery and refining from MSW incineration bottom ash.

    Yang, Y., Balentina, CF., Brouwer, D., Xiao, Y., Voncken, JHL. & Boom, R., 2008, Proceedings of XXIV International Minerals Engineering Congress - IMPC 2008. Wang, DZ., Sun, CY., Wang, FL., Zhang, LC. & Han, L. (eds.). Beijing, China: Science Press, p. 3582-3591 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  157. Metal recovery and refining from MSW incineration bottom ash.

    Yang, Y., Balentina, CF., Brouwer, D., Xiao, Y., Voncken, JHL. & Boom, R., 2008, Proceedings of the Global Symposium on Recycling, Waste Treatment and Clean Technology, REWAS 2008. Mishra, B., Ludwig, C. & Das, S. (eds.). Warrendale, PA, USA: TMS, p. 1285-1294 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  158. Pre-washing and vitrification of fly ash from a municipal solid waste incinerator.

    Xiao, Y., Harskamp, R. & Yang, Y., 2008, Proceedings of the Global Symposium on Recycling, Waste Treatment and Clean Technology, REWAS 2008. Mishra, B., Ludwig, C. & Das, S. (eds.). Warrendale, PA, USA: TMS, p. 1521-1531 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  159. Reducing secondary environmental risk from municipal solid waste incineration.

    Xiao, Y., Yang, Y., Voncken, JHL., Dai, H., Liu, S. & Zhou, L., 2008, Proceedings of XXIV International Minerals Engineering Congress - IMPC 2008. Wang, DZ., Sun, CY., Wang, FL., Zhang, LC. & Han, L. (eds.). Beijing, China: Science Press, p. 3634-3644 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  160. Thermal treatment and vitrification of boiler ash from a municipal solid waste incinerator

    Yang, Y., Xiao, Y., Voncken, JHL. & Wilson, N., 2008, In : Journal of Hazardous Materials. 154, p. 871-879 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  161. Vitrification of bottom ash from a municipal solid waste incinerator

    Xiao, Y., Oorsprong, M., Yang, Y. & Voncken, JHL., 2008, In : Waste Management. 28, p. 1016-1027 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  162. Vitrified bottom ash slag from municipal solid waste incinerators - phase relations of CaO-SiO2-Na2O oxide system.

    Zhang, Z., Xiao, Y., Voncken, JHL., Yang, Y. & Boom, R., 2008, Proceedings of the XXIV International Minerals Engineering Congress - IMPC 2008. Wang, DZ., Sun, CY., Wang, FL., Zhang, LC. & Han, L. (eds.). Beijing, china: Science Press, p. 3575-3581 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  163. 2007
  164. Analysis of transport phenomena and combustion modelling of rotary kiln hazardous waste incinerators.

    Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2007, In : Progress in Computational Fluid Dynamics: an international journal. 7, 2/3/4, p. 209-218 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  165. CFD prediction for the performance of a heat treatment furnace.

    Yang, Y., de Jong, RA. & Reuter, MA., 2007, In : Progress in Computational Fluid Dynamics: an international journal. 7, 2/3/4, p. 209-218 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  166. CFD-based process modelling of a rotary furnace for aluminium scrap melting.

    Zhou, B., Yang, Y., Reuter, MA. & Boin, UMJ., 2007, In : Progress in Computational Fluid Dynamics: an international journal. 7, 2/3/4, p. 195-208 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  167. Metal recovered from MSWI bottom ash vitrification - Copper removal from iron based alloy.

    Xiao, Y., Balantina, CF., Yang, Y., Voncken, JHL. & Boom, R., 2007, Proceedings of the International Conference "Advances in Metallurgical Processes and Materials" - Admet 2007. Stovpchenko, G. (ed.). Dnipropetrovsk, Ukraine: Porohy, p. 303-314 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  168. Microstructure changes of chromite reduced with CO gas.

    Xiao, Y., Yang, Y., Holappa, L. & Boom, R., 2007, Proceedings of the 11th International Ferroalloys Congress INFACON XI.. sn (ed.). New Delhi, India: MacMillan India Ltd, p. 133-144 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  169. Prediction of the cohesive zone properties in the ironmaking blast furnace.

    Adema, AT., Yang, Y. & Boom, R., 2007, Proceedings of the 2nd International Conference of Simulation and Modelling of Metallurgical processes in Steelmaking, Steelsim 2007.. Ludwig, A. (ed.). Leoben, Austria: ASMET, The Austrian Society for Metallurgy and Materials, p. 383-388 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  170. Prediction of the physical and chemical properties of the burden materials in the cohesive zone of the ironmaking blast furnace.

    Adema, AT., Yang, Y. & Boom, R., 2007, Proceedings of Discrete Element Methods 2007.. sn (ed.). Falmouth, United Kingdom: MEI Conferences, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  171. Thermal treatment of ESP ash from a municipal solid waste incinerator

    Xiao, Y., Wilson, N., Yang, Y. & Voncken, JHL., 2007, Proceedings of the R'07 World Congress - Recovery of Materials and Energy for Resource Efficiency. Hilty, L., Edelmann, M. & Ruf, X. (eds.). St. Gallen, Switzerland: EMPA Materials Science and Technology, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  172. Thermal treatment of MSW incineration ESP ash

    Xiao, Y., Wilson, N., Yang, Y. & Voncken, JHL., 2007, Recovery of Materials and Energy for Resource Efficiency. Hilty, LM., Edelmann, X. & Ruf, A. (eds.). Davos: EMPA Materials Science and Technology, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  173. 2006
  174. A CFD model of a submerged arc furnace for phosphorus production.

    Scheepers, E., Adema, AT., Yang, Y., Boom, R. & Reuter, MA., 2006, Proceedings of the Fifth International Conference on Fluid Dynamics in the Process Industries.. Witt, PJ. & Schwarz, MP. (eds.). Melbourne, Australia: CSIRO, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  175. A dynamic-CFD hybrid model of a submerged arc furnace for phosphorus production.

    Scheepers, E., Yang, Y., Reuter, MA. & Adema, AT., 2006, In : Minerals Engineering. 19, 3, p. 309-317 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  176. Analysis of uranium-bearing Fe-phosphide from a submerged arc furnace for phosphorus production

    Voncken, JHL., Scheepers, E. & Yang, Y., 2006, In : Mineralogy and Petrology. 88, 3-4, p. 407-418 12 p.

    Research output: Contribution to journalArticleScientific

  177. CFD simulations of pyrometallurgical processes.

    Yang, Y., Zhou, B., Post, JR., Scheepers, E., Reuter, MA. & Boom, R., 2006, Proceedings of the Fifth International Conference on Fluid Dynamics in the Process Industries.. Witt, PJ. & Schwarz, MP. (eds.). Melbourne, Australia: CSIRO, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  178. Changes in deadman porosity due to coke dissolution and coke size changes, its influence on hot metal flow.

    Post, JR., Yang, Y., Reuter, MA. & van Stel, J., 2006, Proceedings of the 4th International Congress on the Science and Technology of Ironmaking (ICSTI '06). s.n. (ed.). Osaka, Japan: Iron and Steel Institute of Japan, p. 568-572 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  179. Computational fluid dynamics simulation of high temperature metallurgical processes.

    Yang, Y., Zhou, B., Post, JR., Scheepers, E. & Reuter, MA., 2006, Volume 1: Thermo and Physicochemical Principles: Non-Ferrous High Temperature Processing.. Kongoli, F. & Reddy, RG. (eds.). San Diego, USA: TMS, p. 583-594 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  180. Modelling of aluminium scrap melting in a rotary furnace.

    Zhou, B., Yang, Y., Reuter, MA. & Boin, UMJ., 2006, In : Minerals Engineering. 19, 3, p. 299-308 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  181. Process metallurgical research activities at Delft University of Technology, Netherlands. Part II: non-ferrous metallurgy.

    Boom, R., Yang, Y. & Xiao, Y., 2006, In : Berg- und Huttenmannische Monatshefte. 151, 1, p. 13-17 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  182. The development of a CFD model of a submerged arc furnace for phosphorus production.

    Scheepers, E., Yang, Y., Reuter, MA. & Adema, AT., 2006, In : Minerals Engineering. 19, 10, p. 1115-1125 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  183. Thermal behaviour of boiler ash from municipal sold waste incinerator.

    Xiao, Y., Wilson, N., Yang, Y. & Voncken, JHL., 2006, In : Acta Metallurgica Slovaca. 12, p. 436-446 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  184. Tracking chromium behaviour in submerged arc furnace for ferrochrome production.

    Xiao, Y., Yang, Y. & Holappa, L., 2006, Proeceedings of the Sohn International Symposium volume 7- Industrial Practice. Kongoli, F. & Reddy, RG. (eds.). Warrendale USA: TMS, p. 417-433 17 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  185. Vitrification of bottom ash from AVR MSW incinerators.

    Xiao, Y., Oorsprong, M., Yang, Y. & Voncken, JHL., 2006, Proceedings of the 14th North American Waste to Energy Conference.. sn (ed.). Tampa, Florida: ASME, p. 115-123 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  186. 2005
  187. A dynamic CFD hybrid model for submerged arc furnace control

    Scheepers, E., Yang, Y., Reuter, MA., Voncken, JHL. & Adema, AT., 2005, Proc. computational modelling in mineral processing 2005 conference, Cape Town, South Africa. Wills, BA. (ed.). Elsevier, p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  188. A dynamic CFD hybrid model of a submerged arc furnace for phosphorus production

    Scheepers, E., Yang, Y., Reuter, MA. & Adema, AT., 2005, In : Minerals Engineering. 19, 3, p. 309-317 9 p.

    Research output: Contribution to journalArticleScientific

  189. A dynamic CFD hybrid model of a submerged arc furnace for phosphorus production

    Adema, AT., Scheepers, E., Yang, Y. & Reuter, MA., 2005, Proc. 2005 fluent Benelux user group meeting, Limelette, Belgium. s.n. (ed.). Wavre, Belgium: Fluent Ltd., p. 3c-1-3c-12

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  190. A dynamic CFD model for submerged arc furnace control

    Scheepers, E., Yang, Y., Reuter, MA., Voncken, JHL. & Adema, AT., 2005, Proc. pyrometallurgy 2005 conference, Cape Town, South Africa. Wills, BA. (ed.). Elsevier, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  191. Aluminium recycling scrap melting and process simulation

    Yang, Y., Xiao, Y., Zhou, B. & Reuter, MA., 2005, Proc. John Floyd international symposium: sustainable deveopments in metalsprocessing, Melbourne, Australia. Nilmani, M. & Rankin, WJ. (eds.). Australia: NCS associates, p. 251-264 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  192. CFD based process modelling of a rotary furnace for auminium scrap melting

    Zhou, B., Yang, Y., Reuter, MA. & Boin, UMJ., 2005, Proc. 4th international conference computational fluid dynamicsin the oil and gas, metallurgical & process industries. Page, I. & Johansen, ST. (eds.). Trondheim, Norway: SINTEF, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  193. Eaching metallurgy and recycling in an international MSc proram in the context of metal and materials ecology

    Reuter, MA., Heiskanen, K., Boin, UMJ., van Schaik, A. & Yang, Y., 2005, Proc. EMC2005: European metallurgical conference, Dresden, Germany. s.n. (ed.). Germany: GDMB, p. 351-367 17 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  194. Hot metal flow in the hearth of a blast furnace: influence of dynamic changes dead man porosity due to coke dissolution and coke size changes

    Post, JR., Tognarelli, D., van der Stel, J., Yang, Y. & Reuter, MA., 2005, Proc. 5th European coke and ironmaking congress - 5th ECIC, Stockholm. Jernkontoret (ed.). Stockholm: Swedish Steel producers' Association, p. 1-16 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  195. Metal and material ecology 'evolving industry threats into competitive edge'

    Reuter, MA., van Schaik, A. & Yang, Y., 2005, Sustainable developments in metal processing. Nilmani, M. & Rankin, WJ. (eds.). Melbourne: NCS associates, p. 31-45 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  196. Metal and material ecology evolving industry threats into competitive edge

    Reuter, MA., van Schaik, A. & Yang, Y., 2005, Proc. John Floyd international symposium: sustainable developments in metals processing, Melbourne, Australia. Nilmani, M. & Rankin, WJ. (eds.). Australia: NCS associates, p. 31-46 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  197. Modelling the combustion behaviour of the hazardous waste in a rotary-kiln incinerator.

    Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2005, In : Journal of Environmental Science and Health. Part A: Toxic Hazardous Substances and Environmental Engineering. 40, 10, p. 1823-1842 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  198. Process metallurgical research activities at Delft University of Technology, Netherlands, Part I: Ferrous metallurgy

    Boom, R., Yang, Y. & Xiao, Y., 2005, In : Berg- und Huttenmannische Monatshefte. 150, 11, p. 390-394 5 p.

    Research output: Contribution to journalArticleScientific

  199. Process metallurgical research activities at Delft University of Technology, Netherlands. Part I: Ferrous Metallurgy.

    Boom, R., Yang, Y. & Xiao, Y., 2005, In : Berg- und Huttenmannische Monatshefte. 150, 11, p. 390-394 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  200. Process modelling of aluminium scraps melting in molten salt and metal bath in a rotary furnace

    Zhou, B., Yang, Y. & Reuter, MA., 2005, Proc. Pyrometallurgy 2005 conference, Cape Town, South Africa. Wills, BA. (ed.). Mineral Engineering Internatonal, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  201. Teaching metallurgy and recycling in an international MSc program in the context of metal and material ecology

    Reuter, MA., Heiskanen, K., Boin, UMJ., van Schaik, A. & Yang, Y., 2005, Proceedings of EMC 2005. S.n. (ed.). Clausthal-Zellerfeld: GDMB Informationsgesellschaft, p. 351-367 17 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  202. Terahertz heterodyne receiver based on a quantum cascade laser and a superconducting bolometer

    Gao, JR., Hovenier, JN., Yang, Y., Baselmans, JJA., Baryshev, AM., Hajenius, M., Klapwijk, TM., Adam, AJL., Klaassen, TO., Williams, BS., Kumar, S., Hu, Q. & Reno, JL., 2005, In : Applied Physics Letters. 86, 24, p. 244104-1-244104-3

    Research output: Contribution to journalArticleScientificpeer-review

  203. The metrics of material and metal ecology

    Reuter, MA., Heiskanen, K., Boin, UMJ., van Schaik, A., Verhoef, EV., Yang, Y. & Georgalli, GA., 2005, Elsevier. 720 p.

    Research output: Book/ReportBookScientific

  204. The metrics of material and metal ecology - Harmonizing the resource, technology and environmental cycles

    Reuter, MA., Heiskanen, K., Boin, UMJ., van Schaik, A., Verhoef, E., Yang, Y. & Georgalli, GA., 2005, Amsterdam: Elsevier. 706 p.

    Research output: Book/ReportBookScientificpeer-review

  205. Use of CFD to predict the performance of a heat treatment furnace

    Yang, Y., de Jong, RA. & Reuter, MA., 2005, Proc. CFD 2005 - 4th international conference computational fluid dynamics in the oil and gas, metallurgical & process industries. Page, I. & Johansen, ST. (eds.). Trondheim, Norway: SINTEF, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  206. 2004
  207. An overview of the research work in the metallurgy and recycling group at the Delft University of Technology

    Reuter, MA., Boin, UMF. & Yang, Y., 2004, In : World of Metallurgy - Erzmetall. 57, 4, p. 113-124 12 p.

    Research output: Contribution to journalArticleScientific

  208. Analysis of transport process in submerged arc furnace for ferrochrome production

    Yang, Y., Xiao, Y. & Reuter, MA., 2004, Proc. international ferroalloy conference, INFACON X, Cape Town, South Africa. Johannesburg, South Africa: South African Institute of Mining and Metallurgy, p. 15-25 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  209. Combustion modelling of a rotary-kiln hazardous waste incinerator

    Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2004, Proc. 23rd international conference on incineration and thermal treatment technologies - IT3, Phoenix, Arizona, USA. Press, L. & Warren, S. (eds.). Tuscon, Arizona, USA: LOI ZNC, p. 1-18 18 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  210. Flow behaviour of shredded solid waste in a rotary kiln hazardous waste incinerator

    Yang, Y., Reuter, MA. & Verwoerd, J., 2004, Proc. 3rd international conference on combustion, incineration/pyrolysis and emission control (3rd I-CIPEC), Hangzhou, China. Beijing, China: International Academic Publishers, p. 52-87 36 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  211. Flow simulation of shredded solid waste in rotary-kiln hazardous waste incinerator

    Yang, Y., Reuter, MA. & Verwoerd, J., 2004, Proc. Rewas '04: global symposium on recycling, waste treatment and clean technology, Madrid, Spain. Gaballah, I., Mishra, B., Solozabal, R. & Tanaka, M. (eds.). Warrendale, USA: TMS, INASMET, p. 575-592 18 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  212. Incineration of hazardous waste in rotary kilns: better understanding through process simulation

    Yang, Y., Pijnenborg, MJA. & Reuter, MA., 2004, Proc. 2nd international conference on environmental concerns: innovative technologies and management options (ICEC-2004), Xiamen, China. et al Zhang, L. (ed.). Xiamen, China: Xiamen university, p. 1418-1428 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  213. Process modelling of aluminium scrap melting in a molten salt and metal bath in a rotary furnace

    Zhou, B., Yang, Y. & Reuter, MA., 2004, Proc. TMS annual meeting, Charlotte, North Carolina, USA. Tabereaux, AT. (ed.). Warrendale, USA: TMS, p. 919-924 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  214. Section 40.4 Metallurgical process control - Invited book chapter

    Reuter, MA. & Yang, Y., 2004, Smithells etals reference book, 8th edition. Gale, WF. & Totemeier, TC. (eds.). Butterworth Heinemann, p. 16-29

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  215. Simulation of combustion and metal heating in a mobile heat treatment furnace, multiphase phenomena and CFD modelling and simulation of engineering processes

    Yang, Y., de Jong, RA. & Reuter, MA., 2004, Proc. TMS annual meeting, Charlotte, North Carolina, USA. Nastac, L. & Li, BQ. (eds.). Warrendale, USA: TMS, p. 429-439 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  216. Simulation of slab movement and transient heating in a continuous steel reheat furnace

    Yang, Y., Kroeze, J. & Reuter, MA., 2004, In : Progress in Computational Fluid Dynamics: an international journal. 4, 1, p. 46-58 13 p.

    Research output: Contribution to journalArticleScientific

  217. The optimization of recycling: integrating the resource, technological and life cycles

    Reuter, MA., Boin, UMF., Rem, PC., Yang, Y., Fraunholcz, N. & van Schaik, A., 2004, In : JOM: Journal of Metals. 56, 8, p. 33-37 5 p.

    Research output: Contribution to journalArticleScientific

  218. 2003
  219. CFD modelling for control of a chemical waste rotary kiln incinerator

    Yang, Y. & Reuter, MA., 2003, In : Control Engineering Practice. 11, 1, p. 93-101 9 p.

    Research output: Contribution to journalArticleScientific

  220. Combustion modelling of a rotary kiln for hazardous waste incineration

    Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2003, Proc. XXII international mineral processing congress, Cape Town, South Africa. Lorenzen, L., Bradshaw, DJ., Aldrich, C., Eksteen, JJ., Wright, M. & Thom, E. (eds.). p. 1387-1395 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  221. Combustion modelling of hazardous waste incineration

    Yang, Y., Pijnenborg, MJA. & Reuter, MA., 2003, Proc. Yazawa internatonal symposium on metallurgical and materials processing: principles and technologies, San Diego, California, USA. Sohn, HY., Itagaki, K., Yamauchi, C. & Kongoli, F. (eds.). p. 1053-1067 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  222. Hot metal in the blast furnace hearth: thermal and carbon dissolution effects on buoyancy flow and refractory wear

    Post, JR., Peeters, T., Yang, Y. & Reuter, MA., 2003, Proc. 3rd international conference on computational fluid dynamics in the minerals and process industries (CFD-2003), Melbourne, Australia. Witt, PJ. & Schwarz, MP. (eds.). p. 433-440 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  223. Modelling of melting behavior of aluminium metal in molten salt and metal bath

    Zhou, B., Yang, Y. & Reuter, MA., 2003, Proc. Yazawa international symposium on metallurgical and materials processing: principles and technologies, San Diego, California, USA. Sohn, HY., Itagaki, JK., Yamauchi, C. & Kongoli, F. (eds.). p. 1249-1258 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  224. Modelling of the fuel stream and combustion in a rotary kiln hazardous waste incinerator

    Yang, Y., Pijnenborg, MJA. & Reuter, MA., 2003, Proc. 3rd international conference on computational fluid dynamics in the minerals and process industries, Melbourne, Australia. Witt, PJ. & Schwarz, MP. (eds.). p. 25-34 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  225. Modelling the inhomogeneous dead man of a blast furnace: the population blance model approach

    Post, JR., Yang, Y. & Reuter, MA., 2003, Proc. XXII international mineral processing congress, Cape Town, South Africa. Lorenzen, L., Bradshaw, DJ., Aldrich, C., Eksteen, JJ., Wright, M. & Thom, E. (eds.). p. 1396-1405 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  226. Section 40.4 Metallurgical process control

    Reuter, MA. & Yang, Y., 2003, Smithels Metals Reference Book, 8th Edition. Gale, WF. (ed.). p. 1-17

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  227. Thermal effect of the ventilation air to the cooling ring of the rotary kiln waste incinerator

    Pijnenborg, MJA., Yang, Y. & Reuter, MA., 2003, Delft, The Netherlands: Delft Univ. of Technology, Dept. of Applied Earth Sciences. 19 p.

    Research output: Book/ReportReportProfessional

  228. Use of CFD modelling to assist control of a hazadous waste incinerator at AVR-chemie

    Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2003, Proc. IFAC workshop on new technologies for automation of metallurgical industry, Shanghai, China. Wei Wang (ed.). p. 393-398 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  229. 2002
  230. Combustion modelling at the rotary kiln waste incinerator at AVR-chemie. Progress report 2002

    Yang, Y., Pijnenburg, M. & Reuter, MA., 2002, Delft, The Netherlands: Delft University of Technology. 26 p.

    Research output: Book/ReportReportProfessional

  231. Comprehensive processing of low grade sulphidic molybdenum concentrates

    Yang, Y., van den Berg, JAM., Nauta, HHK., van Sandwijk, A. & Reuter, MA., 2002, Proc. bio- and hydrometallurgy '02: the 1st international symposium on bio- and hydrometallurgy, Cape Town, South Africa. p. 1-3 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  232. Comprehensive processing of low grade sulphidic molybdenum ores

    van den Berg, JAM., Yang, Y., Nauta, HHK., van Sandwijk, A. & Reuter, MA., 2002, In : Minerals Engineering. 15, 11, p. 879-883 5 p.

    Research output: Contribution to journalArticleScientific

  233. Progress report 2002: modelling and optimisation of pyrometallurgical batch reactors

    Zhou, B., Yang, Y. & Reuter, MA., 2002, Delft, The Netherlands: Delft University of Technology. 22 p.

    Research output: Book/ReportReportProfessional

  234. Reaction kinetics and process simulation in submerged arc furnace for FeCr production

    Xiao, Y., Yang, Y. & Reuter, MA., 2002, Proc. 1st international symposium on pyrometallurgy, Cape Town, South Africa. p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  235. Study of melting behaviour of aluminium scraps in molten melts

    Zhou, B., Yang, Y. & Reuter, MA., 2002, Proc. TMS Fall 2002 extraction and processing division meeting on recycling and waste treatment in mineral and metal processing: technical and econmic aspects, Lulea, Sweden. p. 527-537 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  236. Study of melting behaviours of aluminium scraps in molten aluminium and salt melts

    Zhou, B., Yang, Y. & Reuter, MA., 2002, Delft, The Netherlands: Delft University of Technology. 31 p.

    Research output: Book/ReportReportProfessional

  237. The distributed nature of material properties and its effect on liquid flow and mass transfer in the blast furnace lower zone

    Post, JR., Husslage, WM., Yang, Y. & Reuter, MA., 2002, Proc. International blast furnace lower zone symposium, Wollongong, Australia. p. 6-1-6-13

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  238. Understanding of hazardous waste incineration through CFD simulation

    Yang, Y., Reuter, MA., Voncken, JHL. & Verwoerd, J., 2002, Proc. TMS Annual meeting, extraction & processing division; fundamentals of advanced materials for energy conversion, Seattle, Washington, USA. Taylor, PR., Chandra, D. & Bautista, RG. (eds.). p. 409-416 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  239. Understanding of hazardous waste incineration through computational fluid-dynamics simulation

    Yang, Y., Reuter, MA., Voncken, JHL. & Verwoerd, J., 2002, In : Journal of Environmental Science and Health. Part A: Toxic Hazardous Substances and Environmental Engineering. A37, 4, p. 693-705 13 p.

    Research output: Contribution to journalArticleScientific

  240. 2001
  241. Automatische bepaling van inhoud en verbrandingswaarde van vaten chemisch afval met röntgentechnologie

    de Jong, TPR., Yang, Y. & Voncken, JHL., 2001, Delft, The Netherlands: Delft University of Technology. 14 p.

    Research output: Book/ReportReportProfessional

  242. Automatische bepaling van inhoud en verbrandingswaarden van vaten chemisch afval met röntgentechnologie

    de Jong, TPR., Yang, Y. & Voncken, JHL., 2001, Delft, The Netherlands: Delft University of Technology. 14 p.

    Research output: Book/ReportReportProfessional

  243. Better understanding and strategic control od hazardous waste incineration at AVR-Chemie

    Yang, Y., Reuter, MA. & Voncken, JHL., 2001, Proc. International Conference on Environmental Concerns and Emerging Abatement Technologies (ECAT). et al Wang, Z. (ed.). Beijing, China, p. 35-1-35-4

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  244. Better understanding and strategic control of hazardous waste incineration at AVR-Chemie

    Yang, Y., Reuter, MA., Voncken, JHL. & Verwoerd, J., 2001, Proc. ECAT International Conferenceon Environmental Concerns and Emerging Abatement Technologies. Beijing, China, p. 35-1-35-4

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  245. CFD Modelling for control of a chemcial waste rotary kiln incinerator.

    Yang, Y. & Reuter, MA., 2001, Proceedings of the 10th IFAC Symposium on automation in Mining, Mineral, and Metal Processing. sn (ed.). Grevenbroich, Germany: s.n., p. 393-398 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  246. CFD modelling for control of a chemical waste rotary kiln incinerator

    Yang, Y. & Reuter, MA., 2001, Proc. 10th IFAC Symposium on Automation in Mining, Mineral and Metal Processing (MMM 2001). Mituhiko, Araki, p. 393-398 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  247. CFD simulation of residence time distribution of a rotary kiln waste incinerator

    Yang, Y., Reuter, MA. & Hartman, DTM., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 1, 14, p. 53-81 29 p.

    Research output: Contribution to journalArticleScientific

  248. CFD simulation of residence time distribution of a rotary kiln waste incinerator.

    Yang, Y., Reuter, MA. & Hartman, DTM., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 14, 1, p. 53-81 29 p.

    Research output: Contribution to journalArticleScientific

  249. Combustion modelling of a rotary kiln waste incinerator with PHOENICS

    Yang, Y., Reuter, MA. & Hartman, DTM., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 1, 14, p. 82-111 30 p.

    Research output: Contribution to journalArticleScientific

  250. Combustion modelling of a rotary kiln waste incinerator with PHOENICS.

    Yang, Y., Reuter, MA. & Hartman, DTM., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 14, 1, p. 82-111 30 p.

    Research output: Contribution to journalArticleScientific

  251. Comprehensive processing of low grade molybdenum sulphide concentrates. Phase III: Cementation of Cu and precipitation of Mo from the leach filtrate

    van den Berg, JAM., Yang, Y., van Sandwijk, A. & Reuter, MA., 2001, Delft, The Netherlands: Delft University of Technology. 22 p.

    Research output: Book/ReportReportProfessional

  252. Comprehensive processing of low grade molybdenum sulphide concentrates; Phase III :Cementation of Cu and precipitation of Mo from the leach filtrate

    van den Berg, JAM., Yang, Y., van Sandwijk, A. & Reuter, MA., 2001, Delft: Delft University of Technology. 22 p.

    Research output: Book/ReportReportProfessional

  253. Corus RD&T: Melt flow in the coke bed in the hearth of a blast furnace

    Post, JR., Reuter, MA. & Yang, Y., 2001, p. 82-82. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  254. Hartman : CFD simulation of residence time distribution of a rotary kiln waste inconerator.

    Yang, Y. & Reuter, MA., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 14, 1, p. 53-81 29 p.

    Research output: Contribution to journalArticleScientific

  255. Hartman ; Combustion modelling of a rotary kiln waste incinerator with PHOENICS.

    Yang, Y. & Reuter, MA., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 14, 1, p. 82-111 30 p.

    Research output: Contribution to journalArticleScientific

  256. Imaging spectrometry and geological applications

    van der Meer, FD., Yang, Y. & Lang, H., 2001, Dordrecht: Kluwer Academic Publishers. 18 p.

    Research output: Book/ReportBookScientific

  257. Modelling and control of resource cycle

    Reuter, MA. & Yang, Y., 2001, Delft: CITG Section Processing of Primary Raw Materials. 301 p.

    Research output: Book/ReportReportProfessional

  258. Modelling and optimisation of a secondary aluminium melting furnace

    Zhou, B., Yang, Y. & Reuter, MA., 2001, Proc. EMC 2001. Friedrichshafen, Germany, p. 84-84 1 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  259. Modelling and optimisation of a secondary aluminium melting furnace.

    Zhou, B., Yang, Y. & Reuter, MA., 2001.

    Research output: Contribution to conferencePosterProfessional

  260. Modelling and optimisation of a secondary aluminium melting surface

    Zhou, B., Yang, Y. & Reuter, MA., 2001, p. 84-84. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  261. Modelling and simulation for minerals and metals processing at TU Delft

    Yang, Y. & Reuter, MA., 2001, p. 86-86. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  262. Modelling of melt flow in the non-homogeneous coke-bed of a blast furface

    Post, JR., Reuter, MA. & Yang, Y., 2001, Delft: Delft University of Technology. 58 p.

    Research output: Book/ReportReportProfessional

  263. Modelling of melt flow in the non-homogeneous coke-bed of a blast furnace

    Post, JR., Reuter, MA. & Yang, Y., 2001, Delft, The Netherlands: Delft University of Technology. 58 p.

    Research output: Book/ReportReportProfessional

  264. Poster: Modelling and simulation for minerals and metals processing at TU Delft.

    Yang, Y. & Reuter, MA., 2001.

    Research output: Contribution to conferencePosterProfessional

  265. Rotary kiln control on chemical waste incinerators - Final report

    Voncken, JHL. & Yang, Y., 2001, Delft, The Netherlands: Delft University of Technology. 34 p.

    Research output: Book/ReportReportProfessional

  266. Rotery kiln control on chemical waste incinerators - Final Report

    Voncken, JHL. & Yang, Y., 2001, Delft: Delft University of Technology. 34 p.

    Research output: Book/ReportReportProfessional

  267. The use of computational fluid dynamics for control of a chemcial waste rotary kiln incinerator.

    Yang, Y. & Reuter, MA., 2001, Proceedings of the 38th GDMB Symposium on automation in Metallurgy. sn (ed.). Grevenbroich, Germany: s.n., p. 73-85 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  268. The use of computational fluid dynamics for control of a chemical waste rotary kiln incinerator.

    Yang, Y. & Reuter, MA., 2001, In : Gesellschaft Deutscher Metallhuetten- und Bergleute. Schriftenreihe. 89, p. 73-85 13 p.

    Research output: Contribution to journalArticleScientific

  269. 2000
  270. Comprehensive processing of low grade molybdenum sulphide concentrates; Preliminary tests for PHASE III: Cementation of Cu and Mo from synthetic and real solutions

    Yang, Y., van den Berg, JAM., van Sandwijk, A. & Reuter, MA., 2000, Delft, The Netherlands: Delft University of Technology. 26 p.

    Research output: Book/ReportReportProfessional

  271. Comprehensive processing of low grade molybdenum sylphide concentrates: PHASE II

    Yang, Y., van den Berg, JAM., van Sandwijk, A. & Reuter, MA., 2000, Delft, The Netherlands: Delft University of Technology. 11 p.

    Research output: Book/ReportReportProfessional

  272. Hyperspectral hydrocarbon microseepage detection: potential and limitation.

    van der Meer, FD., Dijk, P., Yang, Y., Kroonenberg, SB. & Lang, H., 2000, Proc. 2nd EARSeL Workshop on Imaging Spectroscopy. Enschede, p. 42-47 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  273. Melting and dissolution of metal solids in Fe-C melts: A literature review

    Zhou, B., Yang, Y. & Reuter, MA., 2000, Delft, The Netherlands: Delft University of Technology. 36 p.

    Research output: Book/ReportReportProfessional

  274. Metallurgical control - case studies

    Reuter, MA. & Yang, Y., 2000, Proc. MINPREX 2000, Int. Congress of Mineral Processing and Extractive Metallurgy, Melbourne, Australia. Griffiths, P. & Spry, A. (eds.). Melbourne, Australia: s.n., p. 91-101 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  275. Metallurgical control - case studies.

    Reuter, MA. & Yang, Y., 2000, Proceedings MINPREX 2000. Griffiths, P. & Spry, A. (eds.). Melbourne, Australia: s.n., p. 91-101 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  276. Modelling and control of metallurgical reactors

    Reuter, MA. & Yang, Y., 2000, Delft, The Netherlands: Delft University of Technology. 212 p.

    Research output: Book/ReportBookScientific

  277. Progress Report 1: Rotary kiln control in chemical waste incinerators

    Voncken, JHL., Yang, Y., Zuidervaart, E. & Hartman, DTM., 2000, Delft, The Netherlands: Delft University of Technology. 36 p.

    Research output: Book/ReportReportProfessional

  278. Residence time distribution analysis (RTD) of a hazardous waste rotary iln incinerator by way of CFD simulation

    Yang, Y., Hartman, DTM. & Reuter, MA., 2000, Proc. International Conference on Applied Computational Fluid Dynamics (ACFD 2000), Beijing, China. Wu, JH. (ed.). p. 492-499 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  279. Rotary kiln control in chemical waste incinerators: combustion modelling and RTD analysis - Progress report 3

    Yang, Y. & Reuter, MA., 2000, Delft, The Netherlands: Delft University of Technology. 20 p.

    Research output: Book/ReportReportProfessional

  280. Simulation of gas flow and heat transfer inside a commercial hazardous waste rotary kiln incinerator

    Hartman, DTM., Yang, Y. & Reuter, MA., 2000, Proc. AFCD 2000, Int. Conference on Applied Computational Fluid Dynamics, Beijing, China. Wu, JH. (ed.). p. 476-483 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  281. Simulation of gas flow and heat transfer inside a commercial hazardous waste rotary kiln incinerator.

    Hartman, DTM., Yang, Y. & Reuter, MA., 2000, Proceedings of International Conference on Applied Computational Fluid Dynamics (ACFD 2000). Wu, J-H. (ed.). Beijing, China: s.n., p. 476-483 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  282. Study of transient cooling of a tundish after preheating during continuous casting of steel

    Mahabir, J. & Yang, Y., 2000, Delft: CITG Section Processing of Primary Raw Materials. 22 p.

    Research output: Book/ReportReportProfessional

  283. 1999
  284. Analysis of gas flow and mixing in a rotary kiln waste incinerator.

    Yang, Y., Rakhorst, J., Reuter, MA. & Voncken, JHL., 1999, Proceedings Second International Conference on CFD in the Minerals & Process Industries.. Schwarz, MP. (ed.). Melbourne, Australia: s.n., p. 443-448 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  285. Simulation of gas flow and heat transfer in a rotary kiln hazardous waste incinerator.

    Rakhorst, J., Yang, Y., Reuter, MA. & Voncken, JHL., 1999, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 12, 3, p. 278-292 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

ID: 108812