1. 2012
  2. Phase equilibria at liquidus temperatures of the CaO.SiO2-Na2O.SiO2-Na2O.Al2O3.6SiO2 slag system

    Zhang, Z., Xiao, Y., Voncken, JHL., Yang, Y., Boom, R., Wang, N. & Zou, Z., 2012, Proceedings of MOLTEN 2012. s.n. (ed.). Beijing, China: University of Science and Technology Beijing, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Recovery of gallium from Bayer liquor: A review.

    Zhao, Z., Yang, Y., Xiao, Y. & Fan, Y., 2012, In : Hydrometallurgy. 125-126, p. 115-124 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Recycling of aluminium from fibre metal laminates.

    Zhu, G., Xiao, Y., Yang, Y., Wang, J., Sun, B. & Boom, R., 2012, In : Journal of Shanghai Jiaotong University (Science). 17, 3, p. 263-267 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Recyling of composite materials.

    Yang, Y., Boom, R., Irion, B., van Heerden, DJ., Kuiper, P. & de Wit, JHW., 2012, In : Chemical Engineering and Processing: process intensification. 51, p. 53-68 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Slag treatment followed by acid leaching as a route to solar-grade silicon

    Meteleva-Fischer, YV., Yang, Y., Boom, R., Kraaijveld, B. & Kuntzel, H., 2012, In : JOM. 64, 8, p. 957-967 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Solubility of ZrO2 in molten salt system.

    Xiao, Y., Laging, VJW., van Sandwijk, A. & Yang, Y., 2012, Metals and Materials Processing in a Clean Environment, Volume 3: Molten Salts & Ionic Liquids 2011. Kongoli, F. (ed.). Wilmington, USA: Flogen Technologies, p. 135-140 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Thermal decomposition of fine iron ore in a drop tube furnace.

    Qu, Y., Yang, Y., Zeilstra, C., Meijer, K. & Boom, R., 2012, Proceedings of SCANMET IV. s.n. (ed.). Luleå, Sweden: Swerea MEFOS, p. 541-551 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Thermodynamic assessment of the CaO-Na2O-SiO2 slag system.

    Zhang, Z., Xiao, Y., Voncken, JHL., Yang, Y., Boom, R., Wang, N. & Zou, Z., 2012, Proceedings of MOLTEN 2012. s.n. (ed.). Beijing, China: University of Science and Technology Beijing, p. 12-22 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. 2011
  11. Calculation of phase equilibria relations in CaO-SiO2-FeOx-MgO system.

    Wang, N., Huang, C., Xin, H., Zou, Z., Zhang, Z., Xiao, Y. & Yang, Y., 2011, Proceedings of the 2nd International Symposium on High-Temperature Metallurgical Processing. 2011 TMS Annual Meeting & Exhibition.. Hwang, J. & Drelich, J. (eds.). Warrendale, PA, USA: Minerals, Metals and Materials Society, p. 137-142 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Degradation behavior of epoxy resins in fibre metal laminates under thermal conditions.

    Zhu, G., Xiao, Y., Yang, Y., Wang, J., Sun, B. & Boom, R., 2011, Proceedings of ICEM-10. Sun, B. & Wang, J. (eds.). Shanghai, China: Jiaotong University, p. 60-65 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Diffusion mechanisms of vacancy and doped Si in Al3Ti from first-principles calculations.

    Zhu, G., Dai, Y., Shu, D., Xiao, Y., Yang, Y., Wang, J., Sun, B. & Boom, R., 2011, In : Intermetallics. 19, p. 1036-1040 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Effect of oxygen partial pressure and temperature on liquidus for the CaO-SiO2-FeOx-Al2O3 system

    Wang, N., Zou, Z., Zhang, Z., Xiao, Y. & Yang, Y., 2011, In : Advanced Materials Research. 295-297, p. 2279-2282 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. First-principles study of point defects and Si site preference in Al3Ti.

    Zhu, G., Dai, Y., Shu, D., Xiao, Y., Yang, Y., Wang, J. & Sun, B., 2011, In : Computational Materials Science. 50, p. 2636-2639 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. High temperature processing of secondary metallurgical resources.

    Xiao, Y., Yang, Y. & Boom, R., 2011, Proceedings of the Second International Slag Valorisation Symposium.. Jones, PT., Pontikes, Y., Elsen, J., Cizer, Ö., Boehme, L., van Gerven, T., Geysen, D., Guo, M. & Blanpain, B. (eds.). Leuven, Belgium: Katholieke Universiteit Leuven, p. 351-364 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Phase equilibria in the Na2O-CaO-SiO2 system.

    Zhang, Z., Xiao, Y., Voncken, JHL., Yang, Y., Boom, R., Wang, N. & Zou, Z., 2011, In : Journal of the American Ceramic Society. 94, 9, p. 3088-3093 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Poster: Coupled DEM - CFD study of the blast furnace cohesive zone.

    Enqvist-Yuko, M., Adema, AT., Tathavadkar, VD., Yang, Y. & Boom, R., 2011.

    Research output: Contribution to conferencePosterProfessional

  19. Poster: Intermetallic aspects in refining of metallurgical grade silicon.

    Meteleva-Fischer, YV., Yang, Y. & Boom, R., 2011.

    Research output: Contribution to conferencePosterProfessional

  20. Poster: Solar grade silicon: Challenges and achievements.

    Meteleva-Fischer, YV., Yang, Y., Boom, R., Kraaijveld, B. & Kuntzel, H., 2011.

    Research output: Contribution to conferencePosterProfessional

  21. Potential routes for recycling and reuse of silicon kerf.

    Xiao, Y. & Yang, Y., 2011, In : Advanced Materials Research. 295-297, p. 2235-2240 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Recycling of aluminium from fibre metal laminates.

    Zhu, G., Xiao, Y., Yang, Y., Wang, J., Sun, B. & Boom, R., 2011, Proceedings of ICEM-10. Sun, B. & Wang, J. (eds.). Shanghai, China: Jiaotong University, p. 38-43 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Recycling of fiber-metal laminates.

    Yang, Y., Zhu, G. & Xiao, Y., 2011, In : Advanced Materials Research. 295-297, p. 2329-2332 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Resource recovery from MSW incinerator bottom ash.

    Yang, Y. & Xiao, Y., 2011, Proceedings of the Conference "Sustainability through Resource Conservation and Recyling".. s.n. (ed.). Falmouth, United Kingdom: Minerals Engineering International, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Thermodynamics of slag formation in multi-component oxide systems in thermal processing of incineration bottom ash - Equilibrium phase relation in CaO-SiO2-FeOx-MgO system.

    Wang, N., Zou, Z., Zhang, Z., Xiao, Y. & Yang, Y., 2011, In : Advanced Materials Research. 194-196, p. 2175-2178 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Urban mining: contribution to the mitigation of resource scarcity.

    Yang, Y. & Meskers, CEM., 2011, Jaarboek van de Mijnbouwkundige Vereeniging te Delft, 73e editie, 2010-2011. s.n. (ed.). Delft, The Netherlands: Mijnbouwkundige Vereeniging Delft, p. 150-160 384 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  27. 2010
  28. Discrete element method - computational fluid dynamic (DEM-CFD) simulation of the materials flow in an iron-making blast furnace.

    Adema, AT., Yang, Y. & Boom, R., 2010, In : ISIJ International. 50, 7, p. 954-961 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. Ferrovanadium production from petroleum fly ash and BOF flue dust.

    Xiao, Y., Jalkanen, HK., Yang, Y., Mambote, MCR. & Boom, R., 2010, In : Minerals Engineering. 23, 10, p. 1155-1157 3 p.

    Research output: Contribution to journalArticleScientificpeer-review

  30. Metallurgical recycling of silion kerf from wafer sawing slurry.

    Xiao, Y., Mambote, MCR., Yang, Y. & Bruijn, A., 2010, Proceedings of the 3rd International Conference on Engineering for Waste and Biomass Valorisation.. Nzihou, A. & Liu, H. (eds.). Albi, France: Ecole des Mines d'Albi-Carmaux, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Poster: Alloying as a first step in refining of metallurgical grade silicon

    Meteleva-Fischer, YV., Yang, Y. & Boom, R., 2010.

    Research output: Contribution to conferencePosterProfessional

  32. Process modelling and optimization of a submerged arc furnace for phosphorus production.

    Scheepers, E., Yang, Y., Adema, AT., Boom, R. & Reuter, MA., 2010, In : Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science. 41B, 5, p. 990-1005 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Thermal processing of petroleum fly ash for vanadium recovery.

    Xiao, Y., Jalkanen, HK., Yang, Y., Mambote, MCR. & Boom, R., 2010, Proceedings of the XXV International Mineral Processing Congress (IMPC 2010). s.n. (ed.). Brisbane, Australia: The Australasian Institute of Mining and Metallurgy, p. 1643-1652 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Vanadium recovery as FeV from petroleum fly ash.

    Xiao, Y., Mambote, MCR., Jalkanen, HK., Yang, Y. & Boom, R., 2010, Proceedings of the Twelfth International Ferroalloys Congress - Sustainable Future (INFACON XII). Vartiainen, A. (ed.). Helsinki, Finland: Outec Oyj, p. 179-188 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Zinc recovery from zinc ferrite - bearing industrial residues.

    Yang, Y., Kemperman, D. & Xiao, Y., 2010, Proceedings of the 3rd International Conference on Engineering for Waste and Biomass Valorisation.. Nzihou, A. & Liu, H. (eds.). Albi, France: Ecole des Mines d'Albi-Carmaux, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. 2009
  37. Coupled DEM-CFD modelling of the iron-making blast furnace.

    Adema, AT., Yang, Y. & Boom, R., 2009, Proceedings of the 5th International Congress on the Science and Technology of Ironmaking ICTSI'09.. Yang, T. & Wang, W. (eds.). Beijing, China: The Chinese Society for Metals, p. 1085-1089 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  38. Coupled DEM-CFD modelling of the iron-making blast furnace.

    Adema, AT., Yang, Y. & Boom, R., 2009, Proceedings of the 7th International Conference on CFD in the Minerals and Process Industries.. Witt, PJ. & Schwarz, MP. (eds.). Melbourne, Australia: CSIRO, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  39. Distribution of metals in the mineral fraction of PST process at high temperatures.

    Yang, Y. & Xiao, Y., 2009, Delft: Technische Universiteit Delft. 46 p.

    Research output: Book/ReportReportProfessional

  40. Thermal behaviour of ESP ash from municipal solid waste incinerators

    Yang, Y., Xiao, Y., Wilson, N. & Voncken, JHL., 2009, In : Journal of Hazardous Materials. 166, 1, p. 567-575 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Vitrified bottom ash slag from municipal solid waste incinerators - Phase relations of CaO-SiO2-Na2O oxide system.

    Zhang, Z., Xiao, Y., Yang, Y., Boom, R. & Voncken, JHL., 2009, Proceedings of the VIII International Conference on Molten Slags, Fluxes and Salts (Molten 2009). Sanchez, M., Parra, R., Riveros, G. & Diaz, C. (eds.). Santiago, Chile: s.n., p. 43-50 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  42. Zinc recovery from the HDG bottom dross.

    Yang, Y., 2009, Delft: Technische Universiteit Delft. 24 p.

    Research output: Book/ReportReportProfessional

  43. 2008
  44. Computational fluid dynamic modelling of a waste-heat boiler associated with flash smelting of base metal sulphides.

    Bezuidenhout, JJ., Yang, Y. & Eksteen, JJ., 2008, In : South African Institute of Mining and Metallurgy. Journal. 108, p. 179-188 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. DEM fingerprint of a phosphorus producing submerged arc furnace B - The promise of CFD modelling.

    Scheepers, E., Yang, Y., Adema, AT., Boom, R. & Reuter, MA., 2008, Proceedings of the 24th International Minerals Processing Congress 2008.. Duo, WD., Yao, SC., Liang, WF., Cheng, ZL. & Long, H. (eds.). Beijing, PRC: Science Press, p. 2410-2421 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  46. DEM simulation of solid flow in an ironmaking blast furnace - influence of non-spherical particles.

    Adema, AT., Yang, Y. & Boom, R., 2008, Proceedings of the 24th International Minerals Processing Congress 2008.. Duo, WD., Yao, SC., Liang, WF., Cheng, ZL. & Long, H. (eds.). Beijing, PRC: Science Press, p. 2422-2429 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  47. DEM simulation of solid flow in an ironmaking blast furnace - influence of non-spherical particles.

    Adema, AT., Yang, Y. & Boom, R., 2008, Proceedings of the International Symposium on "Recent progress on mathematical modeling in ironmaking 2008.. s.n. (ed.). Tokyo, Japan: Iron and Steel Institute of Japan, p. 130-135 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  48. Fingerprint of a phosphorus producing submerged arc furnace a - The limits of dynamic modeling.

    Scheepers, E., Yang, Y., Boom, R. & Reuter, MA., 2008, Proceedings of the XXIV International Minerals Engineering Congress - IMPC 2008. Wang, DZ., Sun, CY., Wang, FL., Zhang, LC. & Han, L. (eds.). Beijing, China: Science Press, p. 2523-2534 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  49. Metal recovery and refining from MSW incineration bottom ash.

    Yang, Y., Balentina, CF., Brouwer, D., Xiao, Y., Voncken, JHL. & Boom, R., 2008, Proceedings of XXIV International Minerals Engineering Congress - IMPC 2008. Wang, DZ., Sun, CY., Wang, FL., Zhang, LC. & Han, L. (eds.). Beijing, China: Science Press, p. 3582-3591 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  50. Metal recovery and refining from MSW incineration bottom ash.

    Yang, Y., Balentina, CF., Brouwer, D., Xiao, Y., Voncken, JHL. & Boom, R., 2008, Proceedings of the Global Symposium on Recycling, Waste Treatment and Clean Technology, REWAS 2008. Mishra, B., Ludwig, C. & Das, S. (eds.). Warrendale, PA, USA: TMS, p. 1285-1294 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  51. Pre-washing and vitrification of fly ash from a municipal solid waste incinerator.

    Xiao, Y., Harskamp, R. & Yang, Y., 2008, Proceedings of the Global Symposium on Recycling, Waste Treatment and Clean Technology, REWAS 2008. Mishra, B., Ludwig, C. & Das, S. (eds.). Warrendale, PA, USA: TMS, p. 1521-1531 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  52. Reducing secondary environmental risk from municipal solid waste incineration.

    Xiao, Y., Yang, Y., Voncken, JHL., Dai, H., Liu, S. & Zhou, L., 2008, Proceedings of XXIV International Minerals Engineering Congress - IMPC 2008. Wang, DZ., Sun, CY., Wang, FL., Zhang, LC. & Han, L. (eds.). Beijing, China: Science Press, p. 3634-3644 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  53. Thermal treatment and vitrification of boiler ash from a municipal solid waste incinerator

    Yang, Y., Xiao, Y., Voncken, JHL. & Wilson, N., 2008, In : Journal of Hazardous Materials. 154, p. 871-879 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  54. Vitrification of bottom ash from a municipal solid waste incinerator

    Xiao, Y., Oorsprong, M., Yang, Y. & Voncken, JHL., 2008, In : Waste Management. 28, p. 1016-1027 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  55. Vitrified bottom ash slag from municipal solid waste incinerators - phase relations of CaO-SiO2-Na2O oxide system.

    Zhang, Z., Xiao, Y., Voncken, JHL., Yang, Y. & Boom, R., 2008, Proceedings of the XXIV International Minerals Engineering Congress - IMPC 2008. Wang, DZ., Sun, CY., Wang, FL., Zhang, LC. & Han, L. (eds.). Beijing, china: Science Press, p. 3575-3581 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  56. 2007
  57. Analysis of transport phenomena and combustion modelling of rotary kiln hazardous waste incinerators.

    Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2007, In : Progress in Computational Fluid Dynamics: an international journal. 7, 2/3/4, p. 209-218 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  58. CFD prediction for the performance of a heat treatment furnace.

    Yang, Y., de Jong, RA. & Reuter, MA., 2007, In : Progress in Computational Fluid Dynamics: an international journal. 7, 2/3/4, p. 209-218 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  59. CFD-based process modelling of a rotary furnace for aluminium scrap melting.

    Zhou, B., Yang, Y., Reuter, MA. & Boin, UMJ., 2007, In : Progress in Computational Fluid Dynamics: an international journal. 7, 2/3/4, p. 195-208 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  60. Metal recovered from MSWI bottom ash vitrification - Copper removal from iron based alloy.

    Xiao, Y., Balantina, CF., Yang, Y., Voncken, JHL. & Boom, R., 2007, Proceedings of the International Conference "Advances in Metallurgical Processes and Materials" - Admet 2007. Stovpchenko, G. (ed.). Dnipropetrovsk, Ukraine: Porohy, p. 303-314 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  61. Microstructure changes of chromite reduced with CO gas.

    Xiao, Y., Yang, Y., Holappa, L. & Boom, R., 2007, Proceedings of the 11th International Ferroalloys Congress INFACON XI.. sn (ed.). New Delhi, India: MacMillan India Ltd, p. 133-144 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  62. Prediction of the cohesive zone properties in the ironmaking blast furnace.

    Adema, AT., Yang, Y. & Boom, R., 2007, Proceedings of the 2nd International Conference of Simulation and Modelling of Metallurgical processes in Steelmaking, Steelsim 2007.. Ludwig, A. (ed.). Leoben, Austria: ASMET, The Austrian Society for Metallurgy and Materials, p. 383-388 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  63. Prediction of the physical and chemical properties of the burden materials in the cohesive zone of the ironmaking blast furnace.

    Adema, AT., Yang, Y. & Boom, R., 2007, Proceedings of Discrete Element Methods 2007.. sn (ed.). Falmouth, United Kingdom: MEI Conferences, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  64. Thermal treatment of ESP ash from a municipal solid waste incinerator

    Xiao, Y., Wilson, N., Yang, Y. & Voncken, JHL., 2007, Proceedings of the R'07 World Congress - Recovery of Materials and Energy for Resource Efficiency. Hilty, L., Edelmann, M. & Ruf, X. (eds.). St. Gallen, Switzerland: EMPA Materials Science and Technology, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  65. Thermal treatment of MSW incineration ESP ash

    Xiao, Y., Wilson, N., Yang, Y. & Voncken, JHL., 2007, Recovery of Materials and Energy for Resource Efficiency. Hilty, LM., Edelmann, X. & Ruf, A. (eds.). Davos: EMPA Materials Science and Technology, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  66. 2006
  67. A CFD model of a submerged arc furnace for phosphorus production.

    Scheepers, E., Adema, AT., Yang, Y., Boom, R. & Reuter, MA., 2006, Proceedings of the Fifth International Conference on Fluid Dynamics in the Process Industries.. Witt, PJ. & Schwarz, MP. (eds.). Melbourne, Australia: CSIRO, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  68. A dynamic-CFD hybrid model of a submerged arc furnace for phosphorus production.

    Scheepers, E., Yang, Y., Reuter, MA. & Adema, AT., 2006, In : Minerals Engineering. 19, 3, p. 309-317 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  69. Analysis of uranium-bearing Fe-phosphide from a submerged arc furnace for phosphorus production

    Voncken, JHL., Scheepers, E. & Yang, Y., 2006, In : Mineralogy and Petrology. 88, 3-4, p. 407-418 12 p.

    Research output: Contribution to journalArticleScientific

  70. CFD simulations of pyrometallurgical processes.

    Yang, Y., Zhou, B., Post, JR., Scheepers, E., Reuter, MA. & Boom, R., 2006, Proceedings of the Fifth International Conference on Fluid Dynamics in the Process Industries.. Witt, PJ. & Schwarz, MP. (eds.). Melbourne, Australia: CSIRO, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  71. Changes in deadman porosity due to coke dissolution and coke size changes, its influence on hot metal flow.

    Post, JR., Yang, Y., Reuter, MA. & van Stel, J., 2006, Proceedings of the 4th International Congress on the Science and Technology of Ironmaking (ICSTI '06). s.n. (ed.). Osaka, Japan: Iron and Steel Institute of Japan, p. 568-572 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  72. Computational fluid dynamics simulation of high temperature metallurgical processes.

    Yang, Y., Zhou, B., Post, JR., Scheepers, E. & Reuter, MA., 2006, Volume 1: Thermo and Physicochemical Principles: Non-Ferrous High Temperature Processing.. Kongoli, F. & Reddy, RG. (eds.). San Diego, USA: TMS, p. 583-594 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  73. Modelling of aluminium scrap melting in a rotary furnace.

    Zhou, B., Yang, Y., Reuter, MA. & Boin, UMJ., 2006, In : Minerals Engineering. 19, 3, p. 299-308 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  74. Process metallurgical research activities at Delft University of Technology, Netherlands. Part II: non-ferrous metallurgy.

    Boom, R., Yang, Y. & Xiao, Y., 2006, In : Berg- und Huttenmannische Monatshefte. 151, 1, p. 13-17 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  75. The development of a CFD model of a submerged arc furnace for phosphorus production.

    Scheepers, E., Yang, Y., Reuter, MA. & Adema, AT., 2006, In : Minerals Engineering. 19, 10, p. 1115-1125 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  76. Thermal behaviour of boiler ash from municipal sold waste incinerator.

    Xiao, Y., Wilson, N., Yang, Y. & Voncken, JHL., 2006, In : Acta Metallurgica Slovaca. 12, p. 436-446 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  77. Tracking chromium behaviour in submerged arc furnace for ferrochrome production.

    Xiao, Y., Yang, Y. & Holappa, L., 2006, Proeceedings of the Sohn International Symposium volume 7- Industrial Practice. Kongoli, F. & Reddy, RG. (eds.). Warrendale USA: TMS, p. 417-433 17 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  78. Vitrification of bottom ash from AVR MSW incinerators.

    Xiao, Y., Oorsprong, M., Yang, Y. & Voncken, JHL., 2006, Proceedings of the 14th North American Waste to Energy Conference.. sn (ed.). Tampa, Florida: ASME, p. 115-123 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  79. 2005
  80. A dynamic CFD hybrid model for submerged arc furnace control

    Scheepers, E., Yang, Y., Reuter, MA., Voncken, JHL. & Adema, AT., 2005, Proc. computational modelling in mineral processing 2005 conference, Cape Town, South Africa. Wills, BA. (ed.). Elsevier, p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  81. A dynamic CFD hybrid model of a submerged arc furnace for phosphorus production

    Scheepers, E., Yang, Y., Reuter, MA. & Adema, AT., 2005, In : Minerals Engineering. 19, 3, p. 309-317 9 p.

    Research output: Contribution to journalArticleScientific

  82. A dynamic CFD hybrid model of a submerged arc furnace for phosphorus production

    Adema, AT., Scheepers, E., Yang, Y. & Reuter, MA., 2005, Proc. 2005 fluent Benelux user group meeting, Limelette, Belgium. s.n. (ed.). Wavre, Belgium: Fluent Ltd., p. 3c-1-3c-12

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  83. A dynamic CFD model for submerged arc furnace control

    Scheepers, E., Yang, Y., Reuter, MA., Voncken, JHL. & Adema, AT., 2005, Proc. pyrometallurgy 2005 conference, Cape Town, South Africa. Wills, BA. (ed.). Elsevier, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  84. Aluminium recycling scrap melting and process simulation

    Yang, Y., Xiao, Y., Zhou, B. & Reuter, MA., 2005, Proc. John Floyd international symposium: sustainable deveopments in metalsprocessing, Melbourne, Australia. Nilmani, M. & Rankin, WJ. (eds.). Australia: NCS associates, p. 251-264 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  85. CFD based process modelling of a rotary furnace for auminium scrap melting

    Zhou, B., Yang, Y., Reuter, MA. & Boin, UMJ., 2005, Proc. 4th international conference computational fluid dynamicsin the oil and gas, metallurgical & process industries. Page, I. & Johansen, ST. (eds.). Trondheim, Norway: SINTEF, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  86. Eaching metallurgy and recycling in an international MSc proram in the context of metal and materials ecology

    Reuter, MA., Heiskanen, K., Boin, UMJ., van Schaik, A. & Yang, Y., 2005, Proc. EMC2005: European metallurgical conference, Dresden, Germany. s.n. (ed.). Germany: GDMB, p. 351-367 17 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  87. Hot metal flow in the hearth of a blast furnace: influence of dynamic changes dead man porosity due to coke dissolution and coke size changes

    Post, JR., Tognarelli, D., van der Stel, J., Yang, Y. & Reuter, MA., 2005, Proc. 5th European coke and ironmaking congress - 5th ECIC, Stockholm. Jernkontoret (ed.). Stockholm: Swedish Steel producers' Association, p. 1-16 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  88. Metal and material ecology 'evolving industry threats into competitive edge'

    Reuter, MA., van Schaik, A. & Yang, Y., 2005, Sustainable developments in metal processing. Nilmani, M. & Rankin, WJ. (eds.). Melbourne: NCS associates, p. 31-45 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  89. Metal and material ecology evolving industry threats into competitive edge

    Reuter, MA., van Schaik, A. & Yang, Y., 2005, Proc. John Floyd international symposium: sustainable developments in metals processing, Melbourne, Australia. Nilmani, M. & Rankin, WJ. (eds.). Australia: NCS associates, p. 31-46 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  90. Modelling the combustion behaviour of the hazardous waste in a rotary-kiln incinerator.

    Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2005, In : Journal of Environmental Science and Health. Part A: Toxic Hazardous Substances and Environmental Engineering. 40, 10, p. 1823-1842 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  91. Process metallurgical research activities at Delft University of Technology, Netherlands, Part I: Ferrous metallurgy

    Boom, R., Yang, Y. & Xiao, Y., 2005, In : Berg- und Huttenmannische Monatshefte. 150, 11, p. 390-394 5 p.

    Research output: Contribution to journalArticleScientific

  92. Process metallurgical research activities at Delft University of Technology, Netherlands. Part I: Ferrous Metallurgy.

    Boom, R., Yang, Y. & Xiao, Y., 2005, In : Berg- und Huttenmannische Monatshefte. 150, 11, p. 390-394 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  93. Process modelling of aluminium scraps melting in molten salt and metal bath in a rotary furnace

    Zhou, B., Yang, Y. & Reuter, MA., 2005, Proc. Pyrometallurgy 2005 conference, Cape Town, South Africa. Wills, BA. (ed.). Mineral Engineering Internatonal, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  94. Teaching metallurgy and recycling in an international MSc program in the context of metal and material ecology

    Reuter, MA., Heiskanen, K., Boin, UMJ., van Schaik, A. & Yang, Y., 2005, Proceedings of EMC 2005. S.n. (ed.). Clausthal-Zellerfeld: GDMB Informationsgesellschaft, p. 351-367 17 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  95. Terahertz heterodyne receiver based on a quantum cascade laser and a superconducting bolometer

    Gao, JR., Hovenier, JN., Yang, Y., Baselmans, JJA., Baryshev, AM., Hajenius, M., Klapwijk, TM., Adam, AJL., Klaassen, TO., Williams, BS., Kumar, S., Hu, Q. & Reno, JL., 2005, In : Applied Physics Letters. 86, 24, p. 244104-1-244104-3

    Research output: Contribution to journalArticleScientificpeer-review

  96. The metrics of material and metal ecology

    Reuter, MA., Heiskanen, K., Boin, UMJ., van Schaik, A., Verhoef, EV., Yang, Y. & Georgalli, GA., 2005, Elsevier. 720 p.

    Research output: Book/ReportBookScientific

  97. The metrics of material and metal ecology - Harmonizing the resource, technology and environmental cycles

    Reuter, MA., Heiskanen, K., Boin, UMJ., van Schaik, A., Verhoef, E., Yang, Y. & Georgalli, GA., 2005, Amsterdam: Elsevier. 706 p.

    Research output: Book/ReportBookScientificpeer-review

  98. Use of CFD to predict the performance of a heat treatment furnace

    Yang, Y., de Jong, RA. & Reuter, MA., 2005, Proc. CFD 2005 - 4th international conference computational fluid dynamics in the oil and gas, metallurgical & process industries. Page, I. & Johansen, ST. (eds.). Trondheim, Norway: SINTEF, p. 1-9 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  99. 2004
  100. An overview of the research work in the metallurgy and recycling group at the Delft University of Technology

    Reuter, MA., Boin, UMF. & Yang, Y., 2004, In : World of Metallurgy - Erzmetall. 57, 4, p. 113-124 12 p.

    Research output: Contribution to journalArticleScientific

  101. Analysis of transport process in submerged arc furnace for ferrochrome production

    Yang, Y., Xiao, Y. & Reuter, MA., 2004, Proc. international ferroalloy conference, INFACON X, Cape Town, South Africa. Johannesburg, South Africa: South African Institute of Mining and Metallurgy, p. 15-25 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  102. Combustion modelling of a rotary-kiln hazardous waste incinerator

    Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2004, Proc. 23rd international conference on incineration and thermal treatment technologies - IT3, Phoenix, Arizona, USA. Press, L. & Warren, S. (eds.). Tuscon, Arizona, USA: LOI ZNC, p. 1-18 18 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  103. Flow behaviour of shredded solid waste in a rotary kiln hazardous waste incinerator

    Yang, Y., Reuter, MA. & Verwoerd, J., 2004, Proc. 3rd international conference on combustion, incineration/pyrolysis and emission control (3rd I-CIPEC), Hangzhou, China. Beijing, China: International Academic Publishers, p. 52-87 36 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  104. Flow simulation of shredded solid waste in rotary-kiln hazardous waste incinerator

    Yang, Y., Reuter, MA. & Verwoerd, J., 2004, Proc. Rewas '04: global symposium on recycling, waste treatment and clean technology, Madrid, Spain. Gaballah, I., Mishra, B., Solozabal, R. & Tanaka, M. (eds.). Warrendale, USA: TMS, INASMET, p. 575-592 18 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  105. Incineration of hazardous waste in rotary kilns: better understanding through process simulation

    Yang, Y., Pijnenborg, MJA. & Reuter, MA., 2004, Proc. 2nd international conference on environmental concerns: innovative technologies and management options (ICEC-2004), Xiamen, China. et al Zhang, L. (ed.). Xiamen, China: Xiamen university, p. 1418-1428 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  106. Process modelling of aluminium scrap melting in a molten salt and metal bath in a rotary furnace

    Zhou, B., Yang, Y. & Reuter, MA., 2004, Proc. TMS annual meeting, Charlotte, North Carolina, USA. Tabereaux, AT. (ed.). Warrendale, USA: TMS, p. 919-924 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  107. Section 40.4 Metallurgical process control - Invited book chapter

    Reuter, MA. & Yang, Y., 2004, Smithells etals reference book, 8th edition. Gale, WF. & Totemeier, TC. (eds.). Butterworth Heinemann, p. 16-29

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  108. Simulation of combustion and metal heating in a mobile heat treatment furnace, multiphase phenomena and CFD modelling and simulation of engineering processes

    Yang, Y., de Jong, RA. & Reuter, MA., 2004, Proc. TMS annual meeting, Charlotte, North Carolina, USA. Nastac, L. & Li, BQ. (eds.). Warrendale, USA: TMS, p. 429-439 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  109. Simulation of slab movement and transient heating in a continuous steel reheat furnace

    Yang, Y., Kroeze, J. & Reuter, MA., 2004, In : Progress in Computational Fluid Dynamics: an international journal. 4, 1, p. 46-58 13 p.

    Research output: Contribution to journalArticleScientific

ID: 108812