1. Hartman : CFD simulation of residence time distribution of a rotary kiln waste inconerator.

    Yang, Y. & Reuter, MA., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 14, 1, p. 53-81 29 p.

    Research output: Contribution to journalArticleScientific

  2. Hartman ; Combustion modelling of a rotary kiln waste incinerator with PHOENICS.

    Yang, Y. & Reuter, MA., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 14, 1, p. 82-111 30 p.

    Research output: Contribution to journalArticleScientific

  3. High temperature processing of secondary metallurgical resources.

    Xiao, Y., Yang, Y. & Boom, R., 2011, Proceedings of the Second International Slag Valorisation Symposium.. Jones, PT., Pontikes, Y., Elsen, J., Cizer, Ö., Boehme, L., van Gerven, T., Geysen, D., Guo, M. & Blanpain, B. (eds.). Leuven, Belgium: Katholieke Universiteit Leuven, p. 351-364 14 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Hot metal flow in the hearth of a blast furnace: influence of dynamic changes dead man porosity due to coke dissolution and coke size changes

    Post, JR., Tognarelli, D., van der Stel, J., Yang, Y. & Reuter, MA., 2005, Proc. 5th European coke and ironmaking congress - 5th ECIC, Stockholm. Jernkontoret (ed.). Stockholm: Swedish Steel producers' Association, p. 1-16 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  5. Hot metal in the blast furnace hearth: thermal and carbon dissolution effects on buoyancy flow and refractory wear

    Post, JR., Peeters, T., Yang, Y. & Reuter, MA., 2003, Proc. 3rd international conference on computational fluid dynamics in the minerals and process industries (CFD-2003), Melbourne, Australia. Witt, PJ. & Schwarz, MP. (eds.). p. 433-440 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  6. Hydrometallurgical extraction of rare earth elements from low grade mine tailings

    Peelman, S., Sun, Z., Sietsma, J. & Yang, Y., 2016, Rare Metal Technology 2016. Alam, S., Kim, H., Neelameggham, N. R., Ouchi, T. & Oosterhof, H. (eds.). Hoboken, NJ, USA: John Wiley & Sons, p. 17-29

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Hydrometallurgical recovery of copper from complex mixtures of end-of-life shredded ICT products

    Xiao, Y., Yang, Y., van den Berg, JAM., Sietsma, J., Agterhuis, H., de Visser, G. & Bol, D., 2013, In : Hydrometallurgy. 140, p. 128-134 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Hydrometallurgical recovery of rare earth elements from mine tailings and WEEE

    Peelman, S., Kooijman, D., Sietsma, J. & Yang, Y., 2018, In : Journal of Sustainable Metallurgy. 4, 3, p. 367-377

    Research output: Contribution to journalArticleScientificpeer-review

  9. Hyperspectral hydrocarbon microseepage detection: potential and limitation.

    van der Meer, FD., Dijk, P., Yang, Y., Kroonenberg, SB. & Lang, H., 2000, Proc. 2nd EARSeL Workshop on Imaging Spectroscopy. Enschede, p. 42-47 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  10. Identification and recovery of rare-earth permanent magnets from waste electrical and electronic equipment

    Lixandru, A., Venkatesan, P., Jönsson, C., Poenaru, I., Hall, G. B., Yang, Y., Walton, A., Güth, K., Gauß, R. & Gutfleisch, O., 2017, In : Waste Management. 68, p. 482-489

    Research output: Contribution to journalArticleScientificpeer-review

  11. Imaging spectrometry and geological applications

    van der Meer, FD., Yang, Y. & Lang, H., 2001, Dordrecht: Kluwer Academic Publishers. 18 p.

    Research output: Book/ReportBookScientific

  12. Incineration of hazardous waste in rotary kilns: better understanding through process simulation

    Yang, Y., Pijnenborg, MJA. & Reuter, MA., 2004, Proc. 2nd international conference on environmental concerns: innovative technologies and management options (ICEC-2004), Xiamen, China. et al Zhang, L. (ed.). Xiamen, China: Xiamen university, p. 1418-1428 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  13. Ironmaking

    Yang, Y., Raipala, K. & Holappa, L., 2014, Treatise on process metallurgy. Volume 3: Industrial processes. Seetharaman, S. (ed.). Amsterdam: Elsevier, p. 2-88 1745 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  14. Kinetic study on gas molten particle reduction of iron ore fines at high temperature

    Qu, Y., Yang, Y., Zou, Z., Zeilstra, C., Meijer, K. & Boom, R., 2015, In : Ironmaking & Steelmaking: processes, products and applications. 42, 10, p. 763-773

    Research output: Contribution to journalArticleScientificpeer-review

  15. Leaching characteristics and mechanism of the synthetic calcium-aluminate slags for alumina recovery

    Azof, F. I., Yang, Y., Panias, D., Kolbeinsen, L. & Safarian, J., 2019, In : Hydrometallurgy. 185, p. 273-290

    Research output: Contribution to journalArticleScientificpeer-review

  16. Leaching of rare earth elements: Review of past and present technologies

    Peelman, S., Sun, Z., Sietsma, J. & Yang, Y., 2016, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Leal Filho, W. (eds.). Elsevier, p. 319-334

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  17. Leaching of rare earth elements: Past and present

    Peelman, S., Sun, ZHI., Sietsma, J. & Yang, Y., 2014, Proceedings of the 1st European Rare Earth Resources Conference. Balomenos, E., Panias, D. & Paspaliaris, I. (eds.). Santorin: Heliotopos Conferences Ltd., p. 446-456 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Liquidus and phase equilibria in CaO-Al2O3-FeOx-SiO2 system under intermediate oxygen partial pressure

    Wang, N., Chen, M., Zou, Z., Zhang, Z., Xiao, Y. & Yang, Y., 2013, In : Journal of Mining and Metallurgy. Section B: Metallurgy. 49, 2, p. 139-144 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  19. Melting Behaviour of Iron Ore Pellet Bed under Nut Coke Mixed Charge Conditions

    Gavel, D. J., Adema, A., van der Stel, J., Kwakernaak, K., Sietsma, J., Boom, R. & Yang, Y., 2019, In : ISIJ International. 60, 3, 12 p., ISIJINT-2019-246.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Melting and dissolution of metal solids in Fe-C melts: A literature review

    Zhou, B., Yang, Y. & Reuter, MA., 2000, Delft, The Netherlands: Delft University of Technology. 36 p.

    Research output: Book/ReportReportProfessional

  21. Melting and reduction behaviour of individual fine hematite ore particles

    Qu, Y., Yang, Y., Zou, Z., Zeilstra, C., Meijer, K. & Boom, R., 2015, In : ISIJ International. 55, 1, p. 149-157

    Research output: Contribution to journalArticleScientificpeer-review

  22. Metal and material ecology 'evolving industry threats into competitive edge'

    Reuter, MA., van Schaik, A. & Yang, Y., 2005, Sustainable developments in metal processing. Nilmani, M. & Rankin, WJ. (eds.). Melbourne: NCS associates, p. 31-45 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Metal and material ecology evolving industry threats into competitive edge

    Reuter, MA., van Schaik, A. & Yang, Y., 2005, Proc. John Floyd international symposium: sustainable developments in metals processing, Melbourne, Australia. Nilmani, M. & Rankin, WJ. (eds.). Australia: NCS associates, p. 31-46 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  24. Metal recovered from MSWI bottom ash vitrification - Copper removal from iron based alloy.

    Xiao, Y., Balantina, CF., Yang, Y., Voncken, JHL. & Boom, R., 2007, Proceedings of the International Conference "Advances in Metallurgical Processes and Materials" - Admet 2007. Stovpchenko, G. (ed.). Dnipropetrovsk, Ukraine: Porohy, p. 303-314 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Metal recovery and refining from MSW incineration bottom ash.

    Yang, Y., Balentina, CF., Brouwer, D., Xiao, Y., Voncken, JHL. & Boom, R., 2008, Proceedings of XXIV International Minerals Engineering Congress - IMPC 2008. Wang, DZ., Sun, CY., Wang, FL., Zhang, LC. & Han, L. (eds.). Beijing, China: Science Press, p. 3582-3591 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  26. Metal recovery and refining from MSW incineration bottom ash.

    Yang, Y., Balentina, CF., Brouwer, D., Xiao, Y., Voncken, JHL. & Boom, R., 2008, Proceedings of the Global Symposium on Recycling, Waste Treatment and Clean Technology, REWAS 2008. Mishra, B., Ludwig, C. & Das, S. (eds.). Warrendale, PA, USA: TMS, p. 1285-1294 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  27. Metal recovery from industrial solid waste - Contribution to resource sustainability.

    Yang, Y., 2013, Proceedings of REWAS 2013: Enabling Materials Resource Sustainability.. Kvithyld, A., Meskers, C., Kirchain, R. & Krumdick, G. (eds.). Hoboken, NJ, USA: John Wiley & Sons, p. 377-389 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Metallurgical control - case studies

    Reuter, MA. & Yang, Y., 2000, Proc. MINPREX 2000, Int. Congress of Mineral Processing and Extractive Metallurgy, Melbourne, Australia. Griffiths, P. & Spry, A. (eds.). Melbourne, Australia: s.n., p. 91-101 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  29. Metallurgical control - case studies.

    Reuter, MA. & Yang, Y., 2000, Proceedings MINPREX 2000. Griffiths, P. & Spry, A. (eds.). Melbourne, Australia: s.n., p. 91-101 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Metallurgical recycling of silion kerf from wafer sawing slurry.

    Xiao, Y., Mambote, MCR., Yang, Y. & Bruijn, A., 2010, Proceedings of the 3rd International Conference on Engineering for Waste and Biomass Valorisation.. Nzihou, A. & Liu, H. (eds.). Albi, France: Ecole des Mines d'Albi-Carmaux, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Microstructure changes of chromite reduced with CO gas.

    Xiao, Y., Yang, Y., Holappa, L. & Boom, R., 2007, Proceedings of the 11th International Ferroalloys Congress INFACON XI.. sn (ed.). New Delhi, India: MacMillan India Ltd, p. 133-144 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  32. Microstructure of metallurgical grade silicon during alloying refining with calcium.

    Meteleva-Fischer, YV., Yang, Y., Boom, R., Kraaijveld, B. & Kuntzel, H., 2012, In : Intermetallics. 25, p. 9-17 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Modelling and control of metallurgical reactors

    Reuter, MA. & Yang, Y., 2000, Delft, The Netherlands: Delft University of Technology. 212 p.

    Research output: Book/ReportBookScientific

  34. Modelling and control of resource cycle

    Reuter, MA. & Yang, Y., 2001, Delft: CITG Section Processing of Primary Raw Materials. 301 p.

    Research output: Book/ReportReportProfessional

  35. Modelling and optimisation of a secondary aluminium melting furnace

    Zhou, B., Yang, Y. & Reuter, MA., 2001, Proc. EMC 2001. Friedrichshafen, Germany, p. 84-84 1 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  36. Modelling and optimisation of a secondary aluminium melting furnace.

    Zhou, B., Yang, Y. & Reuter, MA., 2001.

    Research output: Contribution to conferencePosterProfessional

  37. Modelling and optimisation of a secondary aluminium melting surface

    Zhou, B., Yang, Y. & Reuter, MA., 2001, p. 84-84. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  38. Modelling and simulation for minerals and metals processing at TU Delft

    Yang, Y. & Reuter, MA., 2001, p. 86-86. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  39. Modelling of aluminium scrap melting in a rotary furnace.

    Zhou, B., Yang, Y., Reuter, MA. & Boin, UMJ., 2006, In : Minerals Engineering. 19, 3, p. 299-308 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Modelling of melt flow in the non-homogeneous coke-bed of a blast furface

    Post, JR., Reuter, MA. & Yang, Y., 2001, Delft: Delft University of Technology. 58 p.

    Research output: Book/ReportReportProfessional

  41. Modelling of melt flow in the non-homogeneous coke-bed of a blast furnace

    Post, JR., Reuter, MA. & Yang, Y., 2001, Delft, The Netherlands: Delft University of Technology. 58 p.

    Research output: Book/ReportReportProfessional

  42. Modelling of melting behavior of aluminium metal in molten salt and metal bath

    Zhou, B., Yang, Y. & Reuter, MA., 2003, Proc. Yazawa international symposium on metallurgical and materials processing: principles and technologies, San Diego, California, USA. Sohn, HY., Itagaki, JK., Yamauchi, C. & Kongoli, F. (eds.). p. 1249-1258 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  43. Modelling of the fuel stream and combustion in a rotary kiln hazardous waste incinerator

    Yang, Y., Pijnenborg, MJA. & Reuter, MA., 2003, Proc. 3rd international conference on computational fluid dynamics in the minerals and process industries, Melbourne, Australia. Witt, PJ. & Schwarz, MP. (eds.). p. 25-34 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  44. Modelling the combustion behaviour of the hazardous waste in a rotary-kiln incinerator.

    Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2005, In : Journal of Environmental Science and Health. Part A: Toxic Hazardous Substances and Environmental Engineering. 40, 10, p. 1823-1842 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Modelling the inhomogeneous dead man of a blast furnace: the population blance model approach

    Post, JR., Yang, Y. & Reuter, MA., 2003, Proc. XXII international mineral processing congress, Cape Town, South Africa. Lorenzen, L., Bradshaw, DJ., Aldrich, C., Eksteen, JJ., Wright, M. & Thom, E. (eds.). p. 1396-1405 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  46. Molecular design of macrocyclic compounds for complete removal of thallium(I) from wastewater

    Zhao, Z., Tian, H., Zhang, M., Yang, Y. & Zhang, H., 2018, In : Environmental Science and Pollution Research. 25, 34, p. 34550-34558

    Research output: Contribution to journalArticleScientificpeer-review

  47. New routes for the production of reactor grade zirconium.

    Xiao, Y., Sandwijk, A., Yang, Y. & Laging, V., 2014, Molten Salts Chemistry and Technology. Gaune-Escard, M. & Haarberg, GM. (eds.). Chichester, West Sussex, UK: Wiley, p. 391-401 632 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  48. Novel reactive anode for electrochemical extraction of rare earth metals from rare earth oxides

    Abbasalizadeh, A., Seetharaman, S., Venkatesan, P., Sietsma, J. & Yang, Y., 2017, Rare Metal Technology 2017: Proceedings. Kim, H., Alam, S., Neelameggham, N. R., Oosterhof, H., Ouchi, T. & Guan, X. (eds.). Cham, Switzerland: Springer, p. 87-92 (The Minerals, Metals & Materials Series).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  49. Numerical simulation of magnetohydrodynamic two-phase flow and heat transfer in electroslag refining of electrolytic manganese metal

    Wang, Q., Chen, Z., Li, G. & Yang, Y., 2018, Proceedings of the 7th International Congress on Science and Technology of Steelmaking (ICS 2018): The Challenge of Industry 4.0. Milan, Italy: Associazione Italiana di Metallurgia, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Phase equilibria at liquidus temperatures of the CaO.SiO2-Na2O.SiO2-Na2O.Al2O3.6SiO2 slag system

    Zhang, Z., Xiao, Y., Voncken, JHL., Yang, Y., Boom, R., Wang, N. & Zou, Z., 2012, Proceedings of MOLTEN 2012. s.n. (ed.). Beijing, China: University of Science and Technology Beijing, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Phase equilibria in the CaO·SiO2-Na2O·SiO2-Na2O·Al2O3·6SiO2 system

    Zhang, Z., Xiao, E., Voncken, JHL., Yang, Y., Boom, R., Wang, N., Zou, Z. & Li, G., 2014, In : Journal of the European Ceramic Society. 34, 2, p. 533-539 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Phase equilibria in the Na2O-CaO-SiO2 system.

    Zhang, Z., Xiao, Y., Voncken, JHL., Yang, Y., Boom, R., Wang, N. & Zou, Z., 2011, In : Journal of the American Ceramic Society. 94, 9, p. 3088-3093 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  53. Poster: Alloying as a first step in refining of metallurgical grade silicon

    Meteleva-Fischer, YV., Yang, Y. & Boom, R., 2010.

    Research output: Contribution to conferencePosterProfessional

  54. Poster: Coupled DEM - CFD study of the blast furnace cohesive zone.

    Enqvist-Yuko, M., Adema, AT., Tathavadkar, VD., Yang, Y. & Boom, R., 2011.

    Research output: Contribution to conferencePosterProfessional

  55. Poster: Intermetallic aspects in refining of metallurgical grade silicon.

    Meteleva-Fischer, YV., Yang, Y. & Boom, R., 2011.

    Research output: Contribution to conferencePosterProfessional

  56. Poster: Modelling and simulation for minerals and metals processing at TU Delft.

    Yang, Y. & Reuter, MA., 2001.

    Research output: Contribution to conferencePosterProfessional

  57. Poster: Recovery of REE from EoL permanent magnets.

    Yang, Y., 2013.

    Research output: Contribution to conferencePosterProfessional

  58. Poster: Solar grade silicon: Challenges and achievements.

    Meteleva-Fischer, YV., Yang, Y., Boom, R., Kraaijveld, B. & Kuntzel, H., 2011.

    Research output: Contribution to conferencePosterProfessional

  59. Potential routes for recycling and reuse of silicon kerf.

    Xiao, Y. & Yang, Y., 2011, In : Advanced Materials Research. 295-297, p. 2235-2240 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  60. Pre-washing and vitrification of fly ash from a municipal solid waste incinerator.

    Xiao, Y., Harskamp, R. & Yang, Y., 2008, Proceedings of the Global Symposium on Recycling, Waste Treatment and Clean Technology, REWAS 2008. Mishra, B., Ludwig, C. & Das, S. (eds.). Warrendale, PA, USA: TMS, p. 1521-1531 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  61. Prediction of density and volume variation of hematite ore particles during in-flight melting and reduction

    Chen, Z. Y., Qu, Y. X., Zeilstra, C., Van Der Stel, J., Sietsma, J. & Yang, Y. X., 2019, In : Journal of Iron and Steel Research International. 26, 12, p. 1285-1294

    Research output: Contribution to journalArticleScientificpeer-review

  62. Prediction of the cohesive zone properties in the ironmaking blast furnace.

    Adema, AT., Yang, Y. & Boom, R., 2007, Proceedings of the 2nd International Conference of Simulation and Modelling of Metallurgical processes in Steelmaking, Steelsim 2007.. Ludwig, A. (ed.). Leoben, Austria: ASMET, The Austrian Society for Metallurgy and Materials, p. 383-388 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  63. Prediction of the physical and chemical properties of the burden materials in the cohesive zone of the ironmaking blast furnace.

    Adema, AT., Yang, Y. & Boom, R., 2007, Proceedings of Discrete Element Methods 2007.. sn (ed.). Falmouth, United Kingdom: MEI Conferences, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  64. Preparation and characterization of fibrous copper powder used for conductive filler.

    Fan, Y., Yang, Y., Xiao, Y. & Zhao, Z., 2013, Proceedings of REWAS 2013: Enabling Materials Resource Sustainability.. Kvithyld, A., Meskers, C., Kirchain, R. & Krumdick, G. (eds.). Hoboken, NJ, USA: John Wiley & Sons, p. 122-132 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  65. Process metallurgical research activities at Delft University of Technology, Netherlands, Part I: Ferrous metallurgy

    Boom, R., Yang, Y. & Xiao, Y., 2005, In : Berg- und Huttenmannische Monatshefte. 150, 11, p. 390-394 5 p.

    Research output: Contribution to journalArticleScientific

  66. Process metallurgical research activities at Delft University of Technology, Netherlands. Part I: Ferrous Metallurgy.

    Boom, R., Yang, Y. & Xiao, Y., 2005, In : Berg- und Huttenmannische Monatshefte. 150, 11, p. 390-394 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  67. Process metallurgical research activities at Delft University of Technology, Netherlands. Part II: non-ferrous metallurgy.

    Boom, R., Yang, Y. & Xiao, Y., 2006, In : Berg- und Huttenmannische Monatshefte. 151, 1, p. 13-17 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  68. Process modelling and optimization of a submerged arc furnace for phosphorus production.

    Scheepers, E., Yang, Y., Adema, AT., Boom, R. & Reuter, MA., 2010, In : Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science. 41B, 5, p. 990-1005 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  69. Process modelling of aluminium scrap melting in a molten salt and metal bath in a rotary furnace

    Zhou, B., Yang, Y. & Reuter, MA., 2004, Proc. TMS annual meeting, Charlotte, North Carolina, USA. Tabereaux, AT. (ed.). Warrendale, USA: TMS, p. 919-924 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  70. Process modelling of aluminium scraps melting in molten salt and metal bath in a rotary furnace

    Zhou, B., Yang, Y. & Reuter, MA., 2005, Proc. Pyrometallurgy 2005 conference, Cape Town, South Africa. Wills, BA. (ed.). Mineral Engineering Internatonal, p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  71. Production of nuclear grade zirconium: A review

    Xu, L., Xiao, Y., van Sandwijk, A., Xu, Q. & Yang, Y., 2015, In : Journal of Nuclear Materials. 466, p. 21-28 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  72. Progress Report 1: Rotary kiln control in chemical waste incinerators

    Voncken, JHL., Yang, Y., Zuidervaart, E. & Hartman, DTM., 2000, Delft, The Netherlands: Delft University of Technology. 36 p.

    Research output: Book/ReportReportProfessional

  73. Progress report 2002: modelling and optimisation of pyrometallurgical batch reactors

    Zhou, B., Yang, Y. & Reuter, MA., 2002, Delft, The Netherlands: Delft University of Technology. 22 p.

    Research output: Book/ReportReportProfessional

  74. Quantitative study on dissolution behavior of Nd2O3 in fluoride melts

    Guo, X., Sun, Z., Sietsma, J., Blanpain, B., Guo, M. & Yang, Y., 2018, In : Industrial and Engineering Chemistry Research. 57, 5, p. 1380-1388

    Research output: Contribution to journalArticleScientificpeer-review

  75. REE Recovery from End-of-Life NdFeB Permanent Magnet Scrap: A Critical Review

    Yang, Y., Walton, A., Sheridan, R., Güth, K., Gauß, R., Gutfleisch, O., Buchert, M., Steenari, B-M., Van Gerven, T., Jones, P. T. & Binnemans, K., 2017, In : Journal of Sustainable Metallurgy. 3, 1, p. 122-149

    Research output: Contribution to journalArticleScientificpeer-review

  76. REE recovery from end-of-life permanent magnet scrap: An overview

    Yang, Y., 2014, In : Science Foundation in China. 22, Supplement, p. 113-126 14 p.

    Research output: Contribution to journalArticleProfessional

  77. Rare earth extraction from NdFeB magnet and rare earth oxides using molten salt processes

    Abbasalizadeh, A., Teng, L., Seetharaman, S., Sietsma, J. & Yang, Y., 2014, Proceedings of the 1st European Rare Earth Resources Conference. Balomenos, E., Panias, D. & Paspaliaris, I. (eds.). Santorin: Heliotopos Conferences Ltd., p. 178-189 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  78. Rare earth extraction from NdFeB magnets and rare earth oxides using aluminum chloride/fluoride molten salts

    Abbasalizadeh, A., Teng, L., Seetharaman, S., Sietsma, J. & Yang, Y., 2016, Rare Earths Industry: Technological, Economic, and Environmental Implications. Borges de Lima, I. & Leal Filho, W. (eds.). Elsevier, p. 357-373

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  79. Rare-earth elements recovery from post-consumer hard-disc drives

    Abrahami, ST., Xiao, Y. & Yang, Y., 2015, In : Mineral Processing and Extractive Metallurgy (Trans. Insti. Min. Metall. C). 124, 2, p. 106-115

    Research output: Contribution to journalArticleScientificpeer-review

  80. Reaction kinetics and process simulation in submerged arc furnace for FeCr production

    Xiao, Y., Yang, Y. & Reuter, MA., 2002, Proc. 1st international symposium on pyrometallurgy, Cape Town, South Africa. p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  81. Recovery of cerium from glass polishing waste: A critical review

    Borra, C. R., Vlugt, T. J. H., Yang, Y. & Offerman, S. E., 2018, In : Metals. 8, 10, 16 p., 801.

    Research output: Contribution to journalArticleScientificpeer-review

  82. Recovery of gallium from Bayer liquor: A review.

    Zhao, Z., Yang, Y., Xiao, Y. & Fan, Y., 2012, In : Hydrometallurgy. 125-126, p. 115-124 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  83. Recovery of neodymium as (Na, Nd)(SO4)2 from the ferrous fraction of a general WEEE shredder stream

    Peelman, S., Sietsma, J. & Yang, Y., 2018, In : Journal of Sustainable Metallurgy. 4, 2, p. 276-287

    Research output: Contribution to journalArticleScientificpeer-review

  84. Recovery of rare earth elements from EOL permanent magnets with molten slag extraction.

    Yang, Y., Abrahami, ST. & Xiao, Y., 2013, Proceedings of the 3rd International Slag Valorisation Symposium.. Jones, PT. (ed.). Leuven, Belgium: ACCO, p. 249-252 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  85. Recovery of rare earth metals from end-of-life permanent magnet scrap: An overview

    Yang, Y., 2014, Proceedings of the 1st European Rare Earth Resources Conference. Balomenos, E., Panias, D. & Paspaliaris, I. (eds.). Santorin: Heliotopos Conferences Ltd., p. 429-445 17 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  86. Recovery of tellurium from high tellurium-bearing materials by alkaline pressure leaching process: Thermodynamic evolution and experimental study.

    Fan, Y., Yang, Y., Xiao, Y., Zhao, Z. & Lei, Y., 2013, In : Hydrometallurgy. 139, p. 95-99 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  87. Recovery of valuable metals from mixture of end-of-life electronic products - a hydrometallurgy path.

    Sun, ZHI., Xiao, Y., Sietsma, J., Agterhuis, H., de Visser, G. & Yang, Y., 2014, Proceedings of Going Green Care Innovation Conference 2014. Vienna, Austria: Austrian Society for Systems Engineering and Automation, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  88. Recovery of valuable metals from waste diamond cutters through ammonia–ammonium sulfate leaching

    Xue, P., Li, G. Q., Yang, Y. X., Qin, Q. W. & Wei, M. X., 2017, In : International Journal of Minerals Metallurgy and Materials. 24, 12, p. 1352-1360

    Research output: Contribution to journalArticleScientificpeer-review

  89. Recycling as a strategy against rare earth element criticality: A systemic evaluation of the potential yield of NdFeB magnet recycling.

    Rademaker, JH., Kleijn, R. & Yang, Y., 2013, In : Environmental Science & Technology (Washington). 47, p. 10129-10136 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  90. Recycling of aluminium from fibre metal laminates.

    Zhu, G., Xiao, Y., Yang, Y., Wang, J., Sun, B. & Boom, R., 2011, Proceedings of ICEM-10. Sun, B. & Wang, J. (eds.). Shanghai, China: Jiaotong University, p. 38-43 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  91. Recycling of aluminium from fibre metal laminates.

    Zhu, G., Xiao, Y., Yang, Y., Wang, J., Sun, B. & Boom, R., 2012, In : Journal of Shanghai Jiaotong University (Science). 17, 3, p. 263-267 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  92. Recycling of fiber-metal laminates.

    Yang, Y., Zhu, G. & Xiao, Y., 2011, In : Advanced Materials Research. 295-297, p. 2329-2332 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  93. Recycling of metals from urban mines - A strategic evaluation

    Sun, ZHI., Xiao, Y., Agterhuis, H., Sietsma, J. & Yang, Y., 2016, In : Journal of Cleaner Production. 112, Part 4, p. 2977-2987

    Research output: Contribution to journalArticleScientificpeer-review

  94. Recycling of rare earths: a critical review.

    Binnemans, K., Jones, PT., Blanpain, B., Van Gerven, T., Yang, Y., Walton, A. & Buchert, M., 2013, In : Journal of Cleaner Production. 51, p. 1-22 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  95. Recyling of composite materials.

    Yang, Y., Boom, R., Irion, B., van Heerden, DJ., Kuiper, P. & de Wit, JHW., 2012, In : Chemical Engineering and Processing: process intensification. 51, p. 53-68 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  96. Reducing secondary environmental risk from municipal solid waste incineration.

    Xiao, Y., Yang, Y., Voncken, JHL., Dai, H., Liu, S. & Zhou, L., 2008, Proceedings of XXIV International Minerals Engineering Congress - IMPC 2008. Wang, DZ., Sun, CY., Wang, FL., Zhang, LC. & Han, L. (eds.). Beijing, China: Science Press, p. 3634-3644 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  97. Reduction kinetics of fine hematite ore particles with a high temperature drop tube furnace

    Qu, Y., Yang, Y., Zou, Z., Zeilstra, C., Meijer, K. & Boom, R., 2015, In : ISIJ International. 55, 5, p. 952-960

    Research output: Contribution to journalArticleScientificpeer-review

  98. Research on the Electrochemical Behavior of Si(IV) on the Tungsten Electrode in CaCl2–CaF2–CaO Molten Melt

    Jidong Li, L., Ren, H., Guo, F., Lu, J., Li, J. & Yang, Y., Sep 2018, In : Russian Journal of Non-Ferrous Metals. 59, 5, p. 486-492 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  99. Residence time distribution analysis (RTD) of a hazardous waste rotary iln incinerator by way of CFD simulation

    Yang, Y., Hartman, DTM. & Reuter, MA., 2000, Proc. International Conference on Applied Computational Fluid Dynamics (ACFD 2000), Beijing, China. Wu, JH. (ed.). p. 492-499 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  100. Resource recovery from MSW incinerator bottom ash.

    Yang, Y. & Xiao, Y., 2011, Proceedings of the Conference "Sustainability through Resource Conservation and Recyling".. s.n. (ed.). Falmouth, United Kingdom: Minerals Engineering International, p. 1-11 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

ID: 108812