1. 2004
  2. The optimization of recycling: integrating the resource, technological and life cycles

    Reuter, MA., Boin, UMF., Rem, PC., Yang, Y., Fraunholcz, N. & van Schaik, A., 2004, In : JOM: Journal of Metals. 56, 8, p. 33-37 5 p.

    Research output: Contribution to journalArticleScientific

  3. 2003
  4. CFD modelling for control of a chemical waste rotary kiln incinerator

    Yang, Y. & Reuter, MA., 2003, In : Control Engineering Practice. 11, 1, p. 93-101 9 p.

    Research output: Contribution to journalArticleScientific

  5. Combustion modelling of a rotary kiln for hazardous waste incineration

    Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2003, Proc. XXII international mineral processing congress, Cape Town, South Africa. Lorenzen, L., Bradshaw, DJ., Aldrich, C., Eksteen, JJ., Wright, M. & Thom, E. (eds.). p. 1387-1395 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  6. Combustion modelling of hazardous waste incineration

    Yang, Y., Pijnenborg, MJA. & Reuter, MA., 2003, Proc. Yazawa internatonal symposium on metallurgical and materials processing: principles and technologies, San Diego, California, USA. Sohn, HY., Itagaki, K., Yamauchi, C. & Kongoli, F. (eds.). p. 1053-1067 15 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  7. Hot metal in the blast furnace hearth: thermal and carbon dissolution effects on buoyancy flow and refractory wear

    Post, JR., Peeters, T., Yang, Y. & Reuter, MA., 2003, Proc. 3rd international conference on computational fluid dynamics in the minerals and process industries (CFD-2003), Melbourne, Australia. Witt, PJ. & Schwarz, MP. (eds.). p. 433-440 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  8. Modelling of melting behavior of aluminium metal in molten salt and metal bath

    Zhou, B., Yang, Y. & Reuter, MA., 2003, Proc. Yazawa international symposium on metallurgical and materials processing: principles and technologies, San Diego, California, USA. Sohn, HY., Itagaki, JK., Yamauchi, C. & Kongoli, F. (eds.). p. 1249-1258 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  9. Modelling of the fuel stream and combustion in a rotary kiln hazardous waste incinerator

    Yang, Y., Pijnenborg, MJA. & Reuter, MA., 2003, Proc. 3rd international conference on computational fluid dynamics in the minerals and process industries, Melbourne, Australia. Witt, PJ. & Schwarz, MP. (eds.). p. 25-34 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  10. Modelling the inhomogeneous dead man of a blast furnace: the population blance model approach

    Post, JR., Yang, Y. & Reuter, MA., 2003, Proc. XXII international mineral processing congress, Cape Town, South Africa. Lorenzen, L., Bradshaw, DJ., Aldrich, C., Eksteen, JJ., Wright, M. & Thom, E. (eds.). p. 1396-1405 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  11. Section 40.4 Metallurgical process control

    Reuter, MA. & Yang, Y., 2003, Smithels Metals Reference Book, 8th Edition. Gale, WF. (ed.). p. 1-17

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  12. Thermal effect of the ventilation air to the cooling ring of the rotary kiln waste incinerator

    Pijnenborg, MJA., Yang, Y. & Reuter, MA., 2003, Delft, The Netherlands: Delft Univ. of Technology, Dept. of Applied Earth Sciences. 19 p.

    Research output: Book/ReportReportProfessional

  13. Use of CFD modelling to assist control of a hazadous waste incinerator at AVR-chemie

    Yang, Y., Pijnenborg, MJA., Reuter, MA. & Verwoerd, J., 2003, Proc. IFAC workshop on new technologies for automation of metallurgical industry, Shanghai, China. Wei Wang (ed.). p. 393-398 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  14. 2002
  15. Combustion modelling at the rotary kiln waste incinerator at AVR-chemie. Progress report 2002

    Yang, Y., Pijnenburg, M. & Reuter, MA., 2002, Delft, The Netherlands: Delft University of Technology. 26 p.

    Research output: Book/ReportReportProfessional

  16. Comprehensive processing of low grade sulphidic molybdenum concentrates

    Yang, Y., van den Berg, JAM., Nauta, HHK., van Sandwijk, A. & Reuter, MA., 2002, Proc. bio- and hydrometallurgy '02: the 1st international symposium on bio- and hydrometallurgy, Cape Town, South Africa. p. 1-3 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  17. Comprehensive processing of low grade sulphidic molybdenum ores

    van den Berg, JAM., Yang, Y., Nauta, HHK., van Sandwijk, A. & Reuter, MA., 2002, In : Minerals Engineering. 15, 11, p. 879-883 5 p.

    Research output: Contribution to journalArticleScientific

  18. Progress report 2002: modelling and optimisation of pyrometallurgical batch reactors

    Zhou, B., Yang, Y. & Reuter, MA., 2002, Delft, The Netherlands: Delft University of Technology. 22 p.

    Research output: Book/ReportReportProfessional

  19. Reaction kinetics and process simulation in submerged arc furnace for FeCr production

    Xiao, Y., Yang, Y. & Reuter, MA., 2002, Proc. 1st international symposium on pyrometallurgy, Cape Town, South Africa. p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  20. Study of melting behaviour of aluminium scraps in molten melts

    Zhou, B., Yang, Y. & Reuter, MA., 2002, Proc. TMS Fall 2002 extraction and processing division meeting on recycling and waste treatment in mineral and metal processing: technical and econmic aspects, Lulea, Sweden. p. 527-537 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  21. Study of melting behaviours of aluminium scraps in molten aluminium and salt melts

    Zhou, B., Yang, Y. & Reuter, MA., 2002, Delft, The Netherlands: Delft University of Technology. 31 p.

    Research output: Book/ReportReportProfessional

  22. The distributed nature of material properties and its effect on liquid flow and mass transfer in the blast furnace lower zone

    Post, JR., Husslage, WM., Yang, Y. & Reuter, MA., 2002, Proc. International blast furnace lower zone symposium, Wollongong, Australia. p. 6-1-6-13

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  23. Understanding of hazardous waste incineration through CFD simulation

    Yang, Y., Reuter, MA., Voncken, JHL. & Verwoerd, J., 2002, Proc. TMS Annual meeting, extraction & processing division; fundamentals of advanced materials for energy conversion, Seattle, Washington, USA. Taylor, PR., Chandra, D. & Bautista, RG. (eds.). p. 409-416 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  24. Understanding of hazardous waste incineration through computational fluid-dynamics simulation

    Yang, Y., Reuter, MA., Voncken, JHL. & Verwoerd, J., 2002, In : Journal of Environmental Science and Health. Part A: Toxic Hazardous Substances and Environmental Engineering. A37, 4, p. 693-705 13 p.

    Research output: Contribution to journalArticleScientific

  25. 2001
  26. Automatische bepaling van inhoud en verbrandingswaarde van vaten chemisch afval met röntgentechnologie

    de Jong, TPR., Yang, Y. & Voncken, JHL., 2001, Delft, The Netherlands: Delft University of Technology. 14 p.

    Research output: Book/ReportReportProfessional

  27. Automatische bepaling van inhoud en verbrandingswaarden van vaten chemisch afval met röntgentechnologie

    de Jong, TPR., Yang, Y. & Voncken, JHL., 2001, Delft, The Netherlands: Delft University of Technology. 14 p.

    Research output: Book/ReportReportProfessional

  28. Better understanding and strategic control od hazardous waste incineration at AVR-Chemie

    Yang, Y., Reuter, MA. & Voncken, JHL., 2001, Proc. International Conference on Environmental Concerns and Emerging Abatement Technologies (ECAT). et al Wang, Z. (ed.). Beijing, China, p. 35-1-35-4

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  29. Better understanding and strategic control of hazardous waste incineration at AVR-Chemie

    Yang, Y., Reuter, MA., Voncken, JHL. & Verwoerd, J., 2001, Proc. ECAT International Conferenceon Environmental Concerns and Emerging Abatement Technologies. Beijing, China, p. 35-1-35-4

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  30. CFD Modelling for control of a chemcial waste rotary kiln incinerator.

    Yang, Y. & Reuter, MA., 2001, Proceedings of the 10th IFAC Symposium on automation in Mining, Mineral, and Metal Processing. sn (ed.). Grevenbroich, Germany: s.n., p. 393-398 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. CFD modelling for control of a chemical waste rotary kiln incinerator

    Yang, Y. & Reuter, MA., 2001, Proc. 10th IFAC Symposium on Automation in Mining, Mineral and Metal Processing (MMM 2001). Mituhiko, Araki, p. 393-398 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  32. CFD simulation of residence time distribution of a rotary kiln waste incinerator

    Yang, Y., Reuter, MA. & Hartman, DTM., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 1, 14, p. 53-81 29 p.

    Research output: Contribution to journalArticleScientific

  33. CFD simulation of residence time distribution of a rotary kiln waste incinerator.

    Yang, Y., Reuter, MA. & Hartman, DTM., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 14, 1, p. 53-81 29 p.

    Research output: Contribution to journalArticleScientific

  34. Combustion modelling of a rotary kiln waste incinerator with PHOENICS

    Yang, Y., Reuter, MA. & Hartman, DTM., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 1, 14, p. 82-111 30 p.

    Research output: Contribution to journalArticleScientific

  35. Combustion modelling of a rotary kiln waste incinerator with PHOENICS.

    Yang, Y., Reuter, MA. & Hartman, DTM., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 14, 1, p. 82-111 30 p.

    Research output: Contribution to journalArticleScientific

  36. Comprehensive processing of low grade molybdenum sulphide concentrates. Phase III: Cementation of Cu and precipitation of Mo from the leach filtrate

    van den Berg, JAM., Yang, Y., van Sandwijk, A. & Reuter, MA., 2001, Delft, The Netherlands: Delft University of Technology. 22 p.

    Research output: Book/ReportReportProfessional

  37. Comprehensive processing of low grade molybdenum sulphide concentrates; Phase III :Cementation of Cu and precipitation of Mo from the leach filtrate

    van den Berg, JAM., Yang, Y., van Sandwijk, A. & Reuter, MA., 2001, Delft: Delft University of Technology. 22 p.

    Research output: Book/ReportReportProfessional

  38. Corus RD&T: Melt flow in the coke bed in the hearth of a blast furnace

    Post, JR., Reuter, MA. & Yang, Y., 2001, p. 82-82. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  39. Hartman : CFD simulation of residence time distribution of a rotary kiln waste inconerator.

    Yang, Y. & Reuter, MA., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 14, 1, p. 53-81 29 p.

    Research output: Contribution to journalArticleScientific

  40. Hartman ; Combustion modelling of a rotary kiln waste incinerator with PHOENICS.

    Yang, Y. & Reuter, MA., 2001, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 14, 1, p. 82-111 30 p.

    Research output: Contribution to journalArticleScientific

  41. Imaging spectrometry and geological applications

    van der Meer, FD., Yang, Y. & Lang, H., 2001, Dordrecht: Kluwer Academic Publishers. 18 p.

    Research output: Book/ReportBookScientific

  42. Modelling and control of resource cycle

    Reuter, MA. & Yang, Y., 2001, Delft: CITG Section Processing of Primary Raw Materials. 301 p.

    Research output: Book/ReportReportProfessional

  43. Modelling and optimisation of a secondary aluminium melting furnace

    Zhou, B., Yang, Y. & Reuter, MA., 2001, Proc. EMC 2001. Friedrichshafen, Germany, p. 84-84 1 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  44. Modelling and optimisation of a secondary aluminium melting furnace.

    Zhou, B., Yang, Y. & Reuter, MA., 2001.

    Research output: Contribution to conferencePosterProfessional

  45. Modelling and optimisation of a secondary aluminium melting surface

    Zhou, B., Yang, Y. & Reuter, MA., 2001, p. 84-84. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  46. Modelling and simulation for minerals and metals processing at TU Delft

    Yang, Y. & Reuter, MA., 2001, p. 86-86. 1 p.

    Research output: Contribution to conferenceAbstractScientific

  47. Modelling of melt flow in the non-homogeneous coke-bed of a blast furface

    Post, JR., Reuter, MA. & Yang, Y., 2001, Delft: Delft University of Technology. 58 p.

    Research output: Book/ReportReportProfessional

  48. Modelling of melt flow in the non-homogeneous coke-bed of a blast furnace

    Post, JR., Reuter, MA. & Yang, Y., 2001, Delft, The Netherlands: Delft University of Technology. 58 p.

    Research output: Book/ReportReportProfessional

  49. Poster: Modelling and simulation for minerals and metals processing at TU Delft.

    Yang, Y. & Reuter, MA., 2001.

    Research output: Contribution to conferencePosterProfessional

  50. Rotary kiln control on chemical waste incinerators - Final report

    Voncken, JHL. & Yang, Y., 2001, Delft, The Netherlands: Delft University of Technology. 34 p.

    Research output: Book/ReportReportProfessional

  51. Rotery kiln control on chemical waste incinerators - Final Report

    Voncken, JHL. & Yang, Y., 2001, Delft: Delft University of Technology. 34 p.

    Research output: Book/ReportReportProfessional

  52. The use of computational fluid dynamics for control of a chemcial waste rotary kiln incinerator.

    Yang, Y. & Reuter, MA., 2001, Proceedings of the 38th GDMB Symposium on automation in Metallurgy. sn (ed.). Grevenbroich, Germany: s.n., p. 73-85 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  53. The use of computational fluid dynamics for control of a chemical waste rotary kiln incinerator.

    Yang, Y. & Reuter, MA., 2001, In : Gesellschaft Deutscher Metallhuetten- und Bergleute. Schriftenreihe. 89, p. 73-85 13 p.

    Research output: Contribution to journalArticleScientific

  54. 2000
  55. Comprehensive processing of low grade molybdenum sulphide concentrates; Preliminary tests for PHASE III: Cementation of Cu and Mo from synthetic and real solutions

    Yang, Y., van den Berg, JAM., van Sandwijk, A. & Reuter, MA., 2000, Delft, The Netherlands: Delft University of Technology. 26 p.

    Research output: Book/ReportReportProfessional

  56. Comprehensive processing of low grade molybdenum sylphide concentrates: PHASE II

    Yang, Y., van den Berg, JAM., van Sandwijk, A. & Reuter, MA., 2000, Delft, The Netherlands: Delft University of Technology. 11 p.

    Research output: Book/ReportReportProfessional

  57. Hyperspectral hydrocarbon microseepage detection: potential and limitation.

    van der Meer, FD., Dijk, P., Yang, Y., Kroonenberg, SB. & Lang, H., 2000, Proc. 2nd EARSeL Workshop on Imaging Spectroscopy. Enschede, p. 42-47 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  58. Melting and dissolution of metal solids in Fe-C melts: A literature review

    Zhou, B., Yang, Y. & Reuter, MA., 2000, Delft, The Netherlands: Delft University of Technology. 36 p.

    Research output: Book/ReportReportProfessional

  59. Metallurgical control - case studies

    Reuter, MA. & Yang, Y., 2000, Proc. MINPREX 2000, Int. Congress of Mineral Processing and Extractive Metallurgy, Melbourne, Australia. Griffiths, P. & Spry, A. (eds.). Melbourne, Australia: s.n., p. 91-101 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  60. Metallurgical control - case studies.

    Reuter, MA. & Yang, Y., 2000, Proceedings MINPREX 2000. Griffiths, P. & Spry, A. (eds.). Melbourne, Australia: s.n., p. 91-101 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  61. Modelling and control of metallurgical reactors

    Reuter, MA. & Yang, Y., 2000, Delft, The Netherlands: Delft University of Technology. 212 p.

    Research output: Book/ReportBookScientific

  62. Progress Report 1: Rotary kiln control in chemical waste incinerators

    Voncken, JHL., Yang, Y., Zuidervaart, E. & Hartman, DTM., 2000, Delft, The Netherlands: Delft University of Technology. 36 p.

    Research output: Book/ReportReportProfessional

  63. Residence time distribution analysis (RTD) of a hazardous waste rotary iln incinerator by way of CFD simulation

    Yang, Y., Hartman, DTM. & Reuter, MA., 2000, Proc. International Conference on Applied Computational Fluid Dynamics (ACFD 2000), Beijing, China. Wu, JH. (ed.). p. 492-499 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  64. Rotary kiln control in chemical waste incinerators: combustion modelling and RTD analysis - Progress report 3

    Yang, Y. & Reuter, MA., 2000, Delft, The Netherlands: Delft University of Technology. 20 p.

    Research output: Book/ReportReportProfessional

  65. Simulation of gas flow and heat transfer inside a commercial hazardous waste rotary kiln incinerator

    Hartman, DTM., Yang, Y. & Reuter, MA., 2000, Proc. AFCD 2000, Int. Conference on Applied Computational Fluid Dynamics, Beijing, China. Wu, JH. (ed.). p. 476-483 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  66. Simulation of gas flow and heat transfer inside a commercial hazardous waste rotary kiln incinerator.

    Hartman, DTM., Yang, Y. & Reuter, MA., 2000, Proceedings of International Conference on Applied Computational Fluid Dynamics (ACFD 2000). Wu, J-H. (ed.). Beijing, China: s.n., p. 476-483 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  67. Study of transient cooling of a tundish after preheating during continuous casting of steel

    Mahabir, J. & Yang, Y., 2000, Delft: CITG Section Processing of Primary Raw Materials. 22 p.

    Research output: Book/ReportReportProfessional

  68. 1999
  69. Analysis of gas flow and mixing in a rotary kiln waste incinerator.

    Yang, Y., Rakhorst, J., Reuter, MA. & Voncken, JHL., 1999, Proceedings Second International Conference on CFD in the Minerals & Process Industries.. Schwarz, MP. (ed.). Melbourne, Australia: s.n., p. 443-448 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  70. Simulation of gas flow and heat transfer in a rotary kiln hazardous waste incinerator.

    Rakhorst, J., Yang, Y., Reuter, MA. & Voncken, JHL., 1999, In : The PHOENICSJournal of Computational Fluid Dynamics & its Applications. 12, 3, p. 278-292 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 Next

ID: 108812