Documents

DOI

PURPOSE: One of the main concerns in fetal MRI is the radiofrequency power that is absorbed both by the mother and the fetus. Passive shimming using high permittivity materials in the form of "dielectric pads" has previously been shown to increase the formula presented efficiency and homogeneity in different applications, while reducing the specific absorption rate (SAR). In this work, we study the effect of optimized dielectric pads for 3 pregnant models. METHODS: Pregnant models in the 3rd, 7th, and 9th months of gestation were used for simulations in a birdcage coil at 3T. Dielectric pads were optimized regions of interest (ROI) using previously developed methods for formula presented efficiency and homogeneity and were designed for 2 ROIs: the entire fetus and the brain of the fetus. The SAR was evaluated in terms of the whole-body SAR, average SAR in the fetus and amniotic fluid, and maximum 10 g-averaged SAR in the mother, fetus, and amniotic fluid. RESULTS: The optimized dielectric pads increased the transmit efficiency up to 55% and increased the formula presented homogeneity in almost every tested configuration. The formula presented -normalized whole-body SAR was reduced by more than 31% for all body models. The formula presented -normalized local SAR was reduced in most scenarios by up to 62%. CONCLUSION: Simulations have shown that optimized high permittivity pads can reduce SAR in pregnant subjects at the 3rd, 7th, and 9th month of gestation, while improving the transmit field homogeneity in the fetus. However, significantly more work is required to demonstrate that fetal imaging is safe under standard operating conditions.

Original languageEnglish
Pages (from-to)1822-1831
Number of pages10
JournalMagnetic Resonance in Medicine
Volume82
Issue number5
DOIs
Publication statusPublished - 2019

    Research areas

  • design tool, dielectric pad, fetal imaging, fetal MRI, high-permittivity, passive shimming

ID: 56192625