TY - JOUR
T1 - Competitive Healing of Creep-Induced Damage in a Ternary Fe-3Au-4W Alloy
AU - Fu, Y.
AU - Kwakernaak, C.
AU - Sloof, W. G.
AU - Tichelaar, F. D.
AU - Brück, E.
AU - van der Zwaag, S.
AU - van Dijk, N. H.
PY - 2020/9
Y1 - 2020/9
N2 - Autonomous healing of creep-induced grain boundary cavities by Au-rich and W-rich precipitates was studied in a Fe-3Au-4W (wt pct) alloy at a fixed temperature of 823 K (550 °C) with different applied stresses. The ternary alloy, with two supersaturated healing solutes, serves as a model system to study the interplay between two separate healing agents. The creep properties are evaluated and compared with those of the previously studied Fe-Au and Fe-W binary systems. The microstructures of the creep-failed samples are studied by electron microscopy to investigate the cavity filling behavior and the mass transfer of supersaturated solute to the defect sites. Compared to the Fe-Au and Fe-W alloys, the new Fe-Au-W alloy has the lowest steady-state strain rate and the longest lifetime. The site-selective filling of the creep-induced cavities is attributed to two different categories of precipitates: micron-sized Au-rich precipitates and nano-sized W-rich precipitates. The Au-rich precipitates are found capable to fully heal the cavities, while the W-rich precipitates show only a limited degree of healing. The two types of precipitates show a reluctance to coexistence, and the formation of W-rich precipitates is suppressed strongly. A model is proposed to describe the competitive healing behavior of the Au-rich and W-rich precipitates.
AB - Autonomous healing of creep-induced grain boundary cavities by Au-rich and W-rich precipitates was studied in a Fe-3Au-4W (wt pct) alloy at a fixed temperature of 823 K (550 °C) with different applied stresses. The ternary alloy, with two supersaturated healing solutes, serves as a model system to study the interplay between two separate healing agents. The creep properties are evaluated and compared with those of the previously studied Fe-Au and Fe-W binary systems. The microstructures of the creep-failed samples are studied by electron microscopy to investigate the cavity filling behavior and the mass transfer of supersaturated solute to the defect sites. Compared to the Fe-Au and Fe-W alloys, the new Fe-Au-W alloy has the lowest steady-state strain rate and the longest lifetime. The site-selective filling of the creep-induced cavities is attributed to two different categories of precipitates: micron-sized Au-rich precipitates and nano-sized W-rich precipitates. The Au-rich precipitates are found capable to fully heal the cavities, while the W-rich precipitates show only a limited degree of healing. The two types of precipitates show a reluctance to coexistence, and the formation of W-rich precipitates is suppressed strongly. A model is proposed to describe the competitive healing behavior of the Au-rich and W-rich precipitates.
UR - http://www.scopus.com/inward/record.url?scp=85086411001&partnerID=8YFLogxK
U2 - 10.1007/s11661-020-05862-6
DO - 10.1007/s11661-020-05862-6
M3 - Article
SN - 1073-5623
VL - 51
SP - 4442
EP - 4455
JO - Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
JF - Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
IS - 9
ER -