Eutectic Sn58Bi (SnBi) solder paste mixed with 0 wt.%, 3 wt.%, 5 wt.%, 8 wt.% and 15 wt.% of Sn-3.0Ag-0.5Cu (SAC) paste was prepared by mechanical mixing. The effects of SAC paste additions on the microstructure evolution of SnBi-SAC/Cu composite solder joints during isothermal aging were investigated. The results indicated that the number of large Bi-rich phases decreased and the relative areas of β-Sn increased with increasing SAC content. Moreover, 1-μm Bi-rich particles were found near the Bi-rich phases. During the isothermal aging process, the diameter of the 1-μm Bi-rich particles in the solder bulk increased by about 50% with aging time by Ostwald ripening. The thickness of the interfacial intermetallic compound in all the solder joints increased slightly during the aging process. The formation of Cu6Sn5 was suppressed by the Bi-rich phases above the Cu6Sn5 layer with the aging time increasing. In addition, the solder bulk showed many cracks along the β-Sn grain boundaries after isothermal aging when the content of SAC paste was 5 wt.%. With 8 wt.% or 15 wt.% SAC, fractures were more obvious near the interface than away from the interface.

Original languageEnglish
Pages (from-to)1758-1765
Number of pages8
JournalJournal of Electronic Materials
Volume48
Issue number3
DOIs
Publication statusPublished - 2019

    Research areas

  • IMC, isothermal aging, microstructure, SAC, SnBi

ID: 51596121