Further developing the bacterial growth potential method for ultra-pure drinking water produced by remineralization of reverse osmosis permeate

Mohaned Sousi, Gang Liu*, Sergio G. Salinas-Rodriguez, Aleksandra Knezev, Bastiaan Blankert, Jan C. Schippers, Walter van der Meer, Maria D. Kennedy

*Corresponding author for this work

Research output: Contribution to journalArticleScientificpeer-review

16 Citations (Scopus)
35 Downloads (Pure)

Abstract

Ensuring the biological stability of drinking water is essential for modern drinking water supply. To understand and manage the biological stability, it is critical that the bacterial growth in drinking water can be measured. Nowadays, advance treatment technologies, such as reverse osmosis (RO), are increasingly applied in drinking water purification where the produced water is characterized by low levels of nutrients and cell counts. The challenge is, therefore, how to measure the low bacterial growth potential (BGP) of such ultra-pure water using the available methods which were originally developed for conventionally treated drinking water. In this study, we proposed a protocol to assess BGP of ultra-pure drinking water produced by RO and post-treatment (including remineralization). Natural bacterial consortium from conventional drinking water was added to all water samples during this study to ensure the presence of a wide range of bacterial strains. The method development included developing an ultra-pure blank with high reproducibility to lower the detection limit of the BGP method (50 ± 20 × 103 intact cells/mL) compared with conventional blanks such as bottled spring water, deep groundwater treated by aeration and slow sand filtrate of surface water supply. The ultra-low blank consists of RO permeate after adjusting its pH and essential mineral content under controlled laboratory conditions to ensure carbon limitation. Regarding the test protocol, inoculum concentrations of >10 × 103 intact cells/mL may have a significant contribution to the measured low levels of BGP. Pasteurization of water samples before measuring BGP is necessary to ensure reliable bacterial growth curves. The optimized method was used to assess BGP of ultra-pure drinking water produced by RO membranes and post-treatment (including remineralization), where the BGP has decreased more than 6-fold to a level of 90 ± 20 × 103 intact cells/mL compared with conventionally treated water (630 ± 70 × 103 intact cells/mL).

Original languageEnglish
Pages (from-to)687-696
Number of pages10
JournalWater Research
Volume145
DOIs
Publication statusPublished - 15 Nov 2018

Keywords

  • Bacterial growth potential (BGP)
  • Flow cytometry (FCM)
  • Remineralization
  • Reverse osmosis (RO)
  • Ultra-pure blank

Fingerprint

Dive into the research topics of 'Further developing the bacterial growth potential method for ultra-pure drinking water produced by remineralization of reverse osmosis permeate'. Together they form a unique fingerprint.

Cite this