• Simon Ravyts
  • Jens D. Moschner
  • Georgi H. Yordanov
  • Giel Van den Broeck
  • Mauricio Dalla Vecchia
  • Patrizio Manganiello
  • Marc Meuris
  • Johan Driesen

Façade building-integrated photovoltaics is a technology that transforms a passive façade into a distributed, renewable electrical generator by the inclusion of solar cells in the building envelope. Partial shading due to nearby objects is a typical problem for façade building-integrated photovoltaics as it strongly reduces the output power of the installation. Distributed maximum power point tracking by means of embedded converters and a common direct current bus has been proposed to alleviate this issue. However, the bus voltage plays an important role in converter topology selection and overall efficiency, although this is not being covered in literature. Also the influence of the solar cell technology on the output voltage of the module is not studied before, although it strongly influences the converter topology selection and the losses. In this paper, a methodology is described to investigate the influence of the voltage level and solar cell technology by taking conversion losses in the converters and the cabling into account. The methodology is applied to two case study buildings for which four different cell technologies are considered. It is shown that overall high efficiencies are obtained, regardless of the voltage level. However, the loss distribution changes significantly with the voltage. This aspect can be used advantageously to reduce thermal stresses on the embedded converter. Furthermore, the overall system efficiency is typically higher when the voltage step-up is lower.

Original languageEnglish
Article number115039
Number of pages15
JournalApplied Energy
Publication statusPublished - 1 Jul 2020

    Research areas

  • BIPV, DC/DC converters, LVDC, MLC

ID: 73206193