Inter-compartment interaction in multi-impeller mixing: Part II. Experiments, sliding mesh and large Eddy simulations

Steady state multiple reference frame-RANS (MRF-RANS) simulations frequently show strong over-predictions of the mixing time in single-phase, multi-impeller mixing tanks, which is sometimes patched by ad hoc tuning of the turbulent Schmidt-number. In Part I of this work, we experimentally revealed the presence of macro-instabilities in the region between the impellers, as well as a peak in the turbulent kinetic energy in the region where the flow from the individual impellers converges. The MRF-RANS method was found unable to capture both. In this second paper, we show that the sliding-mesh RANS (SM-RANS) approach does capture the effect of macro-instabilities, while still underestimating the turbulent kinetic energy. Consequently, the SM-RANS method mildly over-estimates the mixing time, while being less sensitive to the exact mesh geometry. Large eddy simulations with the dynamic Smagorinsky model reasonably capture the kinetic energy contained in macro-instabilities, and properly assess the turbulent kinetic energy in the region between the impellers, even for crude meshes. Consequently, the mixing time is reasonably assessed, and even under-predicted at the crudest meshes. However, the turbulent kinetic energy and energy dissipation in the impeller discharge stream are poorly assessed by the dynamic Smagorinsky model.