Structural and elemental influence from various MOFs on the performance of Fe@C catalysts for Fischer-Tropsch synthesis

Tim A. Wezendonk, Quirinus S E Warringa, Vera P. Santos, Adam Chojecki, Matthijs Ruitenbeek, Garry Meima, Michiel Makkee, Freek Kapteijn*, Jorge Gascon

*Corresponding author for this work

Research output: Contribution to journalArticleScientificpeer-review

36 Citations (Scopus)
122 Downloads (Pure)

Abstract

The structure and elementary composition of various commercial Fe-based MOFs used as precursors for Fischer-Tropsch synthesis (FTS) catalysts have a large influence on the high-temperature FTS activity and selectivity of the resulting Fe on carbon composites. The selected Fe-MOF topologies (MIL-68, MIL-88A, MIL-100, MIL-101, MIL-127, and Fe-BTC) differ from each other in terms of porosity, surface area, Fe and heteroatom content, crystal density and thermal stability. They are re-engineered towards FTS catalysts by means of simple pyrolysis at 500 °C under a N2 atmosphere and afterwards characterized in terms of porosity, crystallite phase, bulk and surface Fe content, Fe nanoparticle size and oxidation state. We discovered that the Fe loading (36-46 wt%) and nanoparticle size (3.6-6.8 nm) of the obtained catalysts are directly related to the elementary composition and porosity of the initial MOFs. Furthermore, the carbonization leads to similar surface areas for the C matrix (SBET between 570 and 670 m2 g-1), whereas the pore width distribution is completely different for the various MOFs. The high catalytic performance (FTY in the range of 1.9-4.6 × 10-4 molCO gFe -1 s-1) of the resulting materials could be correlated to the Fe particle size and corresponding surface area, and only minor deactivation was found for the N-containing catalysts. Elemental analysis of the catalysts containing deliberately added promoters and inherent impurities from the commercial MOFs revealed the subtle interplay between Fe particle size and complex catalyst composition in order to obtain high activity and stability next to a low CH4 selectivity.

Original languageEnglish
Pages (from-to)225-242
Number of pages18
JournalFaraday Discussions
Volume197
DOIs
Publication statusPublished - 2017

Fingerprint

Dive into the research topics of 'Structural and elemental influence from various MOFs on the performance of Fe@C catalysts for Fischer-Tropsch synthesis'. Together they form a unique fingerprint.

Cite this