Documents

  • 7

    Final published version, 4 MB, PDF-document

Links

A Glass Truss Bridge has been constructed on the Green Village on the campus of Delft University of Technology (TU Delft) by the Glass & Transparency Research group (faculties of Architecture and CiTG). The bridge has been fitted with as many glass components as was structurally feasible, showcasing the group’s research into the structural application of glass in the built environment. The diagonals in the truss are glass bundle struts and the nodes of the truss are cast glass components. The lenticular truss will serve as a temporary bridge. Because of the experimental nature of the truss, with its unusual and novel applications of structural glass, a number of demonstrative proof loadings were performed to ease concerns about the safety of the structure. The glass bundles have been proof-loaded to twice their maximum expected load just prior to their installation in the structure. The whole bridge, once installed, has then been proof-loaded for several critical load combinations (static and dynamic) just after installation. During the proof-loading the strains in the glass diagonals have been measured. These lie well within the acceptable limits. In the paper the structural design of the bridge, in particular the glass node connector and the glass bundle diagonals will be explained. Then the proof-loading of the bridge will be described and the results of the proof-loading are presented and discussed.
Original languageEnglish
Article number7
Pages (from-to)139-157
Number of pages19
JournalHeron
Volume63
Issue number1/2
Publication statusPublished - Oct 2018

    Research areas

  • Glass bundles, glass connections, Bridge, live load test

ID: 51437042