Abstract
An experimental investigation of the scratch and abrasive wear behaviour of a lean C-Mn construction steel in its tempered fully martensitic (TM) state is presented. The scratch resistance and the corresponding failure mechanisms as a function of the tempering temperature (200-500 °C) were evaluated using a multi-pass dual-indenter (MPDI) scratch test applying different loading conditions. Results show that the scratch resistance depends not only on the tempering temperature, but also on the load applied during scratching. The optimal tempering temperature depends on the applied load. For both low and high loading conditions, the dual phase (ferrite-martensite) variant with an optimised martensite volume fraction and morphology yields an even better combination of scratch/abrasion resistance and hardness. The scratch resistance at different loading conditions is linked to the strength coefficient K in the Hollomon equation (σ=Kεn). The scratch behaviour in the MPDI scratch test at a low load correlates quite well with the standard ASTM G65 multi-particle abrasion test.
| Original language | English |
|---|---|
| Pages (from-to) | 80-88 |
| Number of pages | 9 |
| Journal | Wear |
| Volume | 358-359 |
| DOIs | |
| Publication status | Published - 15 Jul 2016 |
Keywords
- Abrasion resistance
- Dual phase steel
- Failure mechanisms
- Martensitic steels
- Scratch test
- Tempering